Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Overhead Microphones+(4) Stands
Package Includes:. (1) Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones. (2) Rockville RVMIC3 Tripod Microphone Stand With Quick Release Hand Clutch & Boom. (2) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad.
Features of PRO-D7: Bass Drum Microphone:. Steel grill. Aluminum body. Zinc alloy hardware. Fits any mic stands. Anti-wind filter inside the grill. Element: Dynamic. Polar Pattern: Cardioid. Frequency response is engineered to be perfect for kick drums. Studio quality performance make these perfect for recording or live shows. Sounds great even at high SPL levels. Rejection of unwanted noises. XLR Output. Integrated flexible mounting hardware..
Features of RVMIC3: Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom. One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!). This mic stand is the easiest and quickest to adjust on the market!. Leg joint is made out of aluminum (almost all other brands use plastic). The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON
【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..
TeeJet 1\ Inlet Control Valve, TeeValve AA17Y Farmer Bob's Parts AA17Y
AA17Y 1" NPT Inlet Boom Selector Valve. 1" Inlet, 3/4" Accessory and Boom Outlets. For selective control of three-section boom sprayers at pressures up to 300 PSI. Features: -Use to open any of three boom section lines in any desired combination. -Raise lever to open, lower level to close the valve without changing the indexed position. -Aluminum construction with stainless steel and plastic internal parts for maximum corrosion resistance. -1/4" NPT Pressure gauge port..
Portable Handheld Boom Pole for Shotgun Mic, 3-Section Extendable Microphone Arm for Filming with 1/4' and 3/8' Threads, 3ft to 8.3ft Adjustable Length
【3 Section Stretchable Microphone Boom Pole】The mic boom pole can be smoothly extended and easily locked, Which is perfect for capturing clear sound sources while keeping the mic out of frames for filmmaking, TV broadcast, interviews, vlogging, and more. Note: Detachable design, Easy to fall off between the sections is to make it easier to clean up grit and other garbage in the tube, Not for quality reasons..
【Lightweight & Durable】Rugged aluminum alloy material is resistant to humidity and corrosion for outdoor field and studio recording. This portable handheld boom pole is light, Only 1.52lb/0.69kg, Easy to carry and hold, and reduces the operator's fatigue due to long-term shooting..
【Adjustable Length & Secure Locks】The boom pole for shotgun mic can be adjusted from 3ft/0.94m to 8.3ft/2.55m, You can place the shotgun mic stick as close as possible to the recording location. The twist-and-lock mechanism ensures quick and secure locks between each section..
【Universal Compatibility】The mic boom pole with 1/4" and 3/8" double-ended conversion screws, 3/8" to 5/8" conversion nuts, Allowing direct installation of various microphones, shock mounts, microphone clips and other equipments. Includes velcro straps for cable management and a set....
QuadCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX QuadCast, QuadCast S – RGB USB Condenser Microphone by SUNMON
【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic..
【Stability】- Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
【Mic stand】- Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting HyperX QuadCast..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw..
【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount，Pre-installation completed). Note: NOT INCLUDED STREAMING MIC..
NEEWER Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8\ to 5/8\ Screw and Cable Ties Compatible with Blue Yeti Snowball Yeti X Quadcast, etc. Max Load 3.3lb/1.5kg (White)
【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording needs. Simply loosen the adjustment knob and adjust the boom arm. It's also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. Designed so that the springs don't get in the way of tightening the adjustment knob.
【Upgraded Desk Mount Clamp】This upgraded desk clamp has a 40.7 square centimeters contact area that is 8 times larger than that of a traditional microphone stand desk C clamp. Easily attach it to any desk up to 2.75"/7cm in thickness..
3/8" to 5/8" Screw Adapter & Mic Clip】 The 3/8" to 5/8" adapter allows you to mount multiple types of microphones on the boom arm, compatible with Blue Yeti, Blue Yeti Nano, Blue Snowball etc. Please note that it's not compatible with Blue Yeti Nano which has a 1/4" thread mount. The microphone clip mounts a microphone with a diameter of 1.26"/3.2cm to the boom arm.
【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and keep the boom arm l....
This authentic construction toy features an extendable boom and working bucket, powered by an advanced pneumatic system, plus manual functions including a height-adjustable cab, rotating superstructure, rear-controlled front steering, working front blade and extendable outriggers.
Upgrade with the 8293 LEGO Power Functions motor set (not included) for a fully motorized boom and working lights.
2-in-1 model: rebuilds into a Volvo L30G.
Volvo EW160E with boom and outriggers retracted measures over 6" (17cm) high, 9" (25cm) long and 4" (12cm) wide, and over 11" (29cm) high, 18" (47cm) long and 7" (18cm) wide with boom and outriggers extended.
Volvo L30G with bucket lowered measures over 6" (17cm) high, 13" (34cm) long and 5" (13cm) wide, and over 10" (26cm) high with bucket raised.
CAHAYA Dual-use Tripod Microphone Stand Boom Arm Floor Mic Stand Portable with Carrying Bag and 2 Mic Clips for Singing Performance Wedding Stage Meeting Live CY0311
2-IN-1 BOOM & STRAIGHT MIC STAND: Simply remove the boom arm and attach the mic clip to convert the boom stand to a straight mic stand. It also comes with 2 types of microphone clips which allow you to fit most types of microphones. Perfect for concert, speech, video conference, stage, wedding, recording studio etc..
HEIGHT ADJUSTABLE AS YOU WANT: Thanks to the retractable and rotating design, the height of the microphone stand can be adjusted freely according to your needs. With the quick-release fastener, the height of the boom microphone stand can be adjusted from 25 inch to 102 inch. The highest end can reach 86 inch..
EXTENDABLE & DETACHABLE BOOM ARM: The arm extends freely within xx-xx inch and 180° rotatable via adjustment knobs allowing for easy positioning..
STABLE TRIPOD BASE: CAHAYA tripod boom microphone tripod legs extends further than others which can hold your microphone securely in place. Non-slip foot cover prevent it from moving around..
EASY TO CARRY: Thanks to the foldable structure, the mic stand can be put into the carrying bag and easily carried and installed anywhere..
