HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Power Bundle: Fenix HM50R v2.0 Headlamp Bundle with 2X ARB-L16, 700 Lumen USB-C Rechargeable, Lightweight with Red Light and Lumentac Organizer
BRIGHT SMALL HEADLAMP - The Fenix HM50R v2.0 emits up to 700 lumens with an auxiliary red light. Weighing less than 3 oz, it is ideal for jogging, hiking, camping, running..
USB-C RECHARGEABLE- The HM50R v2 is capable of running up to 42 hours on the lowest mode. Recharge via the built-in USB-C port..
90-DEGREE ANGLE FLASHLIGHT - Sliding the light out of the bracket to use as a handheld flashlight or clip to a pocket, a backpack or belt..
BUILT TO LAST - Built with durable material and rated at IP68 waterproof, this headlamp can withstand any harsh environment..
Contents: Fenix HM50R V2.0 Headlamp, 2x ARB-L16 (one pre-installed, one backup), USB Type-C Charging Cable, LumenTac Organizer.
AuviPal 2-in-1 Micro USB to USB Adapter (OTG Cable + Power Cable) for Fire Stick, Playstation Classic and More - 2 Pack
Specially designed for adding any USB peripherals to your host devices..
PLEASE NOTE: It can NOT charge any Phone or Tablet at the same time, so it will ONLY support OTG if you buy it for Phone or Tablet..
Expansion Capability – Add on any USB peripherals such as keyboards, flash drives, external hard drives, USB card readers, USB ethernet adapter, game controllers or whatever to your Host devices with this 6 inch perfect length 2-in-1 USB OTG Cable..
Plug and play – Simply connect the micro USB male port to your host devices and the micro USB female port to your usb power cable, then it is ready to go. Set it up in minutes without any extra effort or configuration..
24/7 customer service, add to cart & get AuviPal 2-in-1 Micro USB Cable Now! NOTE: Please make sure that your devices support OTG function before you place an order!.
How To Install Kodi On Firestick: The Simple 2017 Updated Step By Step User Guide To Installing Kodi On Your Firestick
Specially designed for adding any USB peripherals to your host devices..
PLEASE NOTE: It can NOT charge any Phone or Tablet at the same time, so it will ONLY support OTG if you buy it for Phone or Tablet..
Expansion Capability - Add on any USB peripherals such as keyboards, flash drives, external hard drives, USB card readers, USB ethernet adapter, game controllers or whatever to your Host devices with this 6 inch perfect length 2-in-1 USB OTG Cable..
Plug and play - Simply connect the micro USB male port to your host devices and the micro USB female port to your usb power cable, then it is ready to go. Set it up in minutes without any extra effort or configuration..
24/7 customer service, add to cart & get AuviPal 2-in-1 Micro USB Cable Now! NOTE: Please make sure that your devices support OTG function before you place an order!.
Fenix HP25R v2.0 Headlamp, 1600 Lumen Spotlight, 400 lumens Floodlight and Red Light, USB-C Rechargeable with LumenTac Organizer
HIGH-PERFORMANCE - The Fenix HP25R v2.0 headlamp emits up to 1600 lumen spotlight reaching 317 yards. You can also switch to a wide-angle floodlight, or an auxiliary red light to preserve the night vision..
USB-C RECHARGEABLE - via its built-in charging port. Includes a 5000mAh high capacity battery. Runs up to 400 hours on the lowest mode..
DESIGN FOR COMFORT -The HP25R v2.0 keeps the battery compartment in the rear to maintain a balanced weight. Also comes with cable clips and helmet clips to wear with helmets..
BUILT TO LAST - Made from durable materials and rated at IP66 waterproof, this headlamp can tolerate any harsh outdoor environments..
Geekworm X825-C8 (X825 V2.0) Metal Case+Power Switch+Cooling Fan Support X825 V2.0 2.5 inch SATA SSD/HDD Shield & Raspberry Pi 4 Model B & X735 Only(Not Include RPi4&X825 V2.0&X735&PSU&SSD&TF Card)
New X825-C8 metal case with power switch and cooling fan specially designed for X825 V2.0 (ASIN:B091JSRQ9C)& X735(ASIN:B07R45W1LN),NOT support X825 V1.5 version.Recommend to use with X735 power management board (X735(ASIN:B07R45W1LN.).
X825-C8 case Only compatible with X825 V2.0, NOT support X825 V1.5 version. User Manual refer to Geekworm WiKi search X825-C8.
We found that USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So when install the Raspberry Pi 4 in the case, if you find the 2.4G signal is unstable, please try to use WIFI 5G AP. (Please refer to WiKi X825#Document).
Also the Bluetooth signal will be affected if use the metal case..
Support Max 9.5MM thickness 2.5 inch SATA HDD/SSD installation；.
Packing List: 1 x X825-C8 Metal Case, 1 x Power Control Switch, 1 x 4010 Cooling Fan(with 4 pieces of screws), 1 x Mounting Screws Pack. Packing List not include the Raspberry Pi 4, X825 Board and 2.5 inch SATA SSD/HDD..
Important: The X825 V2.0 2.5" SATA Shield(ASIN:B091JSRQ9C)& X735 Power management board(ASIN:B07R45W1LN) need to purchase seperately..
HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Fire Stick: A Step by Step Guide and Quick Tips for Getting the Most out of Your Fire Stick with Alexa Voice Remote
Specially designed for adding any USB peripherals to your host devices..
PLEASE NOTE: It can NOT charge any Phone or Tablet at the same time, so it will ONLY support OTG if you buy it for Phone or Tablet..
Expansion Capability - Add on any USB peripherals such as keyboards, flash drives, external hard drives, USB card readers, USB ethernet adapter, game controllers or whatever to your Host devices with this 6 inch perfect length 2-in-1 USB OTG Cable..
Plug and play - Simply connect the micro USB male port to your host devices and the micro USB female port to your usb power cable, then it is ready to go. Set it up in minutes without any extra effort or configuration..
24/7 customer service, add to cart & get AuviPal 2-in-1 Micro USB Cable Now! NOTE: Please make sure that your devices support OTG function before you place an order!.
Thunderbolt 3 Dock - Dual 4K@60Hz Monitor, Dockteck Laptop Docking Station with 60W Charging, 2 Thunderbolt 3, DP1.4 8K, 2 USB A 10G, USB C Gen 2, UHS-II SD/TF, Audio, RJ45- Mac&Windows
Thunderbolt3 port 1 (near DC) for TB3 / USB-C host.
SD and micro SD card UHS:II (can work simultaneously).
DUAL 4K@60HZ OR SINGLE 8K@30HZ -When working on Thunderbolt 3 host: Support dual 4K@60Hz displays, single 8K@30Hz, single 5K@60Hz via DP1.4 and Thunderbolt 3 port 2. Our dock doesn’t have HDMI port, so please connect HDMI monitor by using a USB C to HDMI or active DP to HDMI cable. When working on USB C host with DP Alt Mode: support single max 4K@60Hz video via DP1.4 port.
10GBPS DATA SPEED - Type-C and 2 USB A ports supports USB 3.2 Gen2, with which the maximum data transmission can reach 10Gbps (2X faster than regular USB 3.0), and device charging (5V/1.5A over Type-C and one USB A port, 5V/900mA over another USB A port). SD and TF card support UHS-II, max 312MB/s data transfer rate..
IN THE BOX - Dockteck Thunderbolt 3 Dock.
User Manual. We provide two-years warranty and lifetime technical support. We suggest you toread below “Technical Specification” for User Manual carefully before using..
