Best Surface Hub 2s

Surface Pro 7 Hub Docking Station with 4K HDMI Adapter+RJ45 Ethernet LAN+ USB C PD Charging +2 Port USB 3.0+SD/TF(Micro SD) Card Reader Converter Combo Adaptor for Microsoft Surface Pro 7

  • Design for Surface Pro 7: Surface Pro 7 Hub Turns the USB-A connection and USB C into 7 ports (HDMI 4K/30Hz, 100M Ethernet LAN, USB-C Port(60W PD Charging port+ Data Transfer), 2 x USB-A, SD & MicroSD Card Reader)*Note 1: This surface pro dock won't fit your surface very well if you use an protective case on it. Compatible with Microsoft Surface 7.* Note2: Incompatible with Surface Go.
  • Advanced networking & blazing fast data transfers:Surface Pro 7 LAN Adapter offers full 10/100 Mbps over RJ45 Ethernet port, Download movies quicker, transfer files faster, reduce latency. The Bawanfa Surface Pro 7 hub is Ultra fast with speeds of 5Gbps for 2x USB 3.0 Ports, high speed up to 5Gbps, transfer faster, saving plenty of your time and enjoy data transmission in seconds. This surface docking station works with U disk, mouse, keyboard and other USB devices..
  • Surface Pro 7 HDMI Adapter: This surface docking station supports the video resolution 1080P @60Hz, up to 4K @30Hz and freely show your laptop's high-resolution display on most HDTV, monitor or projector with an HDMI port, bringing you better viewing experience..
Check Stock

ERIA Zigbee 10 ft Flexible Extended Colors LED Strip, Compatible, Philips Hue, SmartThings, Alexa, Google Assistant and ZigBee hubs

  • Colors and White Shades: Choose from 16 million colors and a wide array of warm and cold white color temperatures (2000~6000K) With this LED strip. Easily bend and shape the ERIA Lightstrip for your application then affix it easily With its Adhesive back on a surface or under a cupboard..
  • ERIA ZigBee bulbs work directly With Zigbee compatible hubs, including ERIA, Philips Hue, SmartThings and Alexa devices With built-in smart hub. *Does not work With Apple Homekit..
  • Voice controlled: connect directly With Amazon Alexa devices With a built-in smart hub.
  • Echo plus, Echo studio, Echo 4th Gen, Echo 10 Show 10 (2nd gen latest). For all other Alexa devices and the Google home hub a Zigbee ERIA hub is required to activate voice control..
  • 10 ft LED strip With double adhesive back Is extendible up to 200 inches by separate ERIA extension strips that are available..
  • Easily bend and shape the ERIA Lightstrip for your application. Stick it to any surface With it’s adhesive back.
  • the possibilities are endless! (For more information and setup instruction visit our website FAQ)..
Check Stock

Zeee 2S 5200mAh 7.4V 50C Lipo Battery Hard Case Lipos with EC5 Plug for 1/8 1/10 RC Vehicles Car Slash RC Buggy Truggy RC Hobby(2 Pack)

  • 【Zeee 2S 5200mAh Lipos Specification】- Battery voltage: 7.4V.
  • 【Dimensions】- Zeee 5200mAh 2S lipo dimension is: 138*47*25mm/5.43*1.85*0.98inch.
  • 【Application】 – Zeee 2S 5200mAh Lipo battery compatible with 1/8 and 1/10 rc car, Losi, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Bandit, Rustler version(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【High Performance】- Zeee 2S lipo battery with 50C discharge rate hardcase offers you very high power and very long run time for your RC cars. They are widely fit the 1/8 and 1/10 RC car model..
  • 【What you get】- 2 Pack of Zeee 7.4V 50C 5200mAh 2S Lipo Battery hard case with EC5 Connector. Please enter “YOUR ORDER” to contact us directly if you have any problems, we will reply you within 24 hours..
Check Stock

Zeee 2S Shorty Lipo Battery 5000mAh 7.4V 100C Hard Case with 4mm Bullet to Deans Connector for RC 1/10 Scale Vehicles Car Trucks Boats RC Models

  • 【Zeee 2S Shorty Lipo Specification】- Battery Voltage: 7.4V.
  • 【2S Battery Demensions】- Zeee 2S Shorty RC Lipo Dimension(±2mm): 95.5*47*25mm/3.76*1.85*0.98inch(L*W*H).
  • 【7.4V Lipo Application】- Zeee shorty lipo 2S 5000mAh Virtually all 1/10 Scale Vehicles, especially those in need of short battery dimensions. Use the size specifications below to determine if this battery will fit your application..
  • 【Safety Warning】 - 1. Users must read safety manual before use of the battery.
  • 2. You must use Lithium Polymer(LiPo) specific charger only.
  • 3. The suggested charge rate is 0.5 - 1C.
  • 【What You Get】- 1 Pack Zeee 5000mAh 2S shorty lipo battery with 4mm Bullet to Deans T connector. Any product problems, please Contact US: 1. Enter into "Your Orders" to click "Contact Seller" option.
  • 2. Click "Ask a question" on our storefront. We will get back to you within 24 hours..
Check Stock

DRIFT MANIAC 8 Speed Freewheel 11-32T Epoch Ebike

  • 8 speed freewheel 11-34, 11-13-15-18-21-24-28-34 Teeth.Compatible with hub motor e-bike, mountain bike, cargo bike, city bike, commuting bike.Thread hub offset >=Freewheel stack height(38.5mm)+1.5mm.
  • Large 34 teeth sprocket, create bigger gear range. Make climbing even easier..
  • Ebike specific freewheel 8 speed,Made of high strength SPHC and durable chromoly steel. Nickel plated surface treatment..
  • Total height: 38.5mm+/-0.2mm, Weight:601g+/-1g,hot rolled steel cogs(sprockets) + 3 layer nickel plated, steel clutch mechanism..
  • Designed for E-bike, ratchet mechanism is high strength and durable.Speed range 309%. Fits standard motorized rear hub with threaded freewheel mount, compatible also with standard threaded bicycle freewheel hub..
Check Stock

Blomiky 2-in-1 2S 7.4V 1000mA Li-ion/Li-po Battery Balance Charger Cable for RC Boat Airplane Helicopter Trucks Cars 2S Lipo Battery 7.4V 1 to 2

  • 2 in 1 XH-3P charge port, 2 charge dincator for 2 charge port, 1 indicator for 1 charge port. Charge port :XH-3P white 3 pin connector. it can charge 2 2S 7.4V Li-ion or Li-Po battery at same time,.
  • Only can charge 7.4V 2S lithium Li-ion or Li-polymer battery, advise battery capacity is less 2000mAh, It take 5-7 hours to charge full 2000mAh battery..
  • Balanace charger cable built-in over-charged,over-volatge, over-heat protection IC circuit board, green light is blink when charging, green light stop blink after full charge. red light.
  • 7.4V 1A 2S Lipo battery charger cable fit for RC Drone RC Quadcopter 7.4V 2S Lipo or Li-ion Battery,which use same XH-3P Charger plug..
  • 7.4V 1A 2S Lipo battery charger cable fit for RC Truck Cars vehicles buggy 7.4V 2S Lipo or Li-ion Battery,which use same XH-3P Charger plug..
Check Stock

Zeee Premium Series 2S Lipo Battery 5200mAh 7.4V 120C Hard Case Batteries with Deans Plug for 1/8 1/10 RC Vehicles Car Trucks Airplane Boats(2 Pack)

  • 【Zeee Premium Series Specification】- Battery voltage: 7.4V.
  • 【2S Lipos Dimensions】- Zeee 5200mAh 2S lipo dimension is: 138*47*25mm/5.43*1.85*0.98inch(L*W*H).
  • 【2S Battery Application】 – Zeee 2S 5200mAh Lipo battery specially designed for 1/8 and 1/10 rc car such as Losi, Slash, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Safety Warning】- 1. Users must read safety manual before use of the battery.
  • 2. You must use Lithium Polymer(LiPo) specific charger only.
  • 【What you get】- 2 Pack of Zeee 7.4V 120C 5200mAh 2S Lipo Battery Hard case with Dean-Style T Connector. Any product problems, please Contact US: 1. Enter into “Your Orders” to click “Contact Seller” option.
  • 2. Click “Ask a question” on our storefront. We will get back to you within 24 hours..
Check Stock

XANAD EVA Hard Case for Logitech MX Master 3 Advanced/Master 2S Wireless Mouse

  • Greater Capacity : The Hard case can fits your Logitech MX Master 2S/3 Advanced Wireless Mouse perfectly and has a storage area for the cables or charging wire..
  • Sturdy and Strong case : The interior is made of Great Velvet and the exterior is made of high quality EVA material, which can protect your Logitech MX Master 2S/3 Advanced Wireless Mouse from shockproof, semi-waterproof, dustproof and wear-resistant ..
  • Perfect Travel Carrying Case : Comes with comfortable strong and sturdy handle to holds your Logitech MX Master 2S/3 Advanced Wireless Mouse perfectly and this hard case is lightweight and compact to fit in your bag , backpack or luggage and convenient to take anywhere ..
  • Perfect Fit :The case is tailored for Logitech MX Master 2S/3 Advanced Wireless Mouse . External Dimension :5.7 x 2.3 x 4.1 inches , weight : 87.5 g / 0.19 lbs..
  • Packing Include : Case only (Logitech MX Master 2S/3 Advanced Wireless Mouse and its accessories are not included).
  • Backed by 100% Money back Guarantee if there is any quality problem, risk-free buy ..
Check Stock

Zeee 7.4V 100C 5200mAh 2S Lipo Battery Deans T Connector with Housing for RC Car Truck Vehicle Buggy Losi 1/10 Scale Racing Model

  • 【Zeee 2S 5200mAh RC Lipos Specification】- Material: Lithium polymer.
  • 【Dimensions】- Zeee 5200mAh 2S lipo dimension is: 138*47*25mm/5.43*1.85*0.98inch(L*W*H).
  • 【Application】 - Zeee 5200mAh 2S RC Lipo battery fit for Lipo Battery special compatible with professional 1/10 scale and 1/8 scale RC car hobby....
  • 【High Performance】- Zeee 5200mAh 2S lipo battery with 100C discharge rate hardcase offers you very high power and very long run time for your RC....
  • 【What You Get】- 1 Pack of Zeee 7.4V 100C 5200mAh Hardcase Lipo Battery with Deans Connector. After-sales Service: Every Zeee Product has 30 Days....
Check Stock

HQPASFY Wheel Hub Removal Tool 8629 Replacement for ATD Tools ATD8629 Compatible with All Axle Bolt Hubs (5, 6 and 8 Lug Hubs)

  • 【HIGH QUALITY】Long life-span matters, that is why hub remover kit are made from high-quality steel with black oxide surface which has excellent rust resistance and durable to ensure it can work a long time.
  • 【HOW TO USE】Fix the 8629 hub removal tool to the hub using the flange nut provided and then strike the end of the removal tool with a 5-pound or heavier hammer until the hub comes loose. Attention: This tool must be installed at the 12 o'clock position.
  • 【FUNCTION】Using this 8629 hub removal tool, you can safely and quickly remove hub components or frozen hub assemblies without damaging the axles.
  • 【Advantages】Attached with enough flange nuts: 12mm-1.50, 14mm-1.50, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18. Works on nearly all hubs whether two wheel drive or four wheel drive.
  • 【12-MONTH WARRANTY】If you have any other questions about our products, please contact us anytime and we will be glad to assist you. Your satisfaction is the direction we have been working towards.
Check Stock