Best Surface Plate Vise

Pin Vise for Resin Casting Molds, LEOBRO Steel Hand Drill, Resin Drill with 10 PCS Drill Bit, Precision Hand Drill Tools for Epoxy Resin Arts Crafts, Wood, Clay, DIY Resin Keychain Jewelry Making

  • Handy Hand Drill for Crafts: Help drill small holes in resin, wood, plastic, polymer clay, bead, pearl or other not too hard surface, assist to make resin jewelry, resin keychain, necklace, erring, bracelet, pendant, model, sculpture, doll etc., make small precision job much easier. Note: Not fit for hard materials, like iron, steel, stone..
  • Sturdy & Exquisite Pin Vise: The precision resin drill is made of premium stainless steel, rust proof, sturdy and durable. Silver surface, polished handle, has even rough texture in 3 turning parts, looks pretty exquisite and can be rotated easily, fit for various DIY craft projects..
  • Precision Drill Bits Set: 10 sizes of steel drill bits, 0.8/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0 mm, satisfy your different demands. Pointed end, good for drilling, and the holes drilled will be nice and clean. All 10pcs are packed in a plastic box which has 10 compartments and according marks, prevent loss, and easy to distinguish..
  • Tight 3 Jaw Chuck: The hand pin vise features 3 jaw chuck, clamp the drills bits in 0.8-3 mm, keep them upright and clip them tightly, great for smooth drilling work, and it’s easy to install and replace drill bits by rotating the vise head..
  • Use-friendly Drill Tool: Swivel hand drill for manual drilling, ....
Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

TRISENSE 6' Vise Jaws with Strong Magnetic, Universal Soft Vice Jaws Pads Covers, Multi-Purpose Protector for Any Metal Vice,2 pcs,Golden

  • PERFORMANCE: Aluminum 6" Vise Jaws can use on any metal Vise for holding wood, metal, plastic, tubing, threaded items safely to protect any product flat or round..
  • APPLICATION: The magnetic Vise jaws are great with variety of vices, including vice block, bench vices, mill clamps, drill press vices and so on..
  • ADVANTAGE: Strong embedded magnets keep vice jaws in place securely..
  • DESIGN: Special designed V-Shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping..
  • Great for holding wood, metal, plastic. Ideal for all kinds of shop, craft, jewelry, and gunsmithing projects..
Check Stock

TEKTON 4 Inch Swivel Bench Vise | 54004

  • Includes 1-pc. 120-degree swivel bench vise: 4 in..
  • Cast iron construction (30,000 PSI tensile strength) with replaceable serrated steel jaws holds work with a sure, nonslip grip.
  • 120-degree swivel base with dual lock-down nuts positions workpiece where you need it.
  • Three mounting holes anchor vise securely to workbench.
  • Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces.
  • Acme-threaded screw glides smoothly without binding.
  • Requires three 3/8-inch diameter bolts (not included) for mounting.
Check Stock

Yost Vises MA-345 4-1/2' Magnetic Aluminum Vise Jaw Caps (1 Pair)

  • Jaw caps attach to and cover a set of 4-1/2"-wide serrated vise jaws to shield delicate work from damage.
  • Aluminum provides durability, and the smooth grooved surface provides enhanced grip while preventing the clamped item from being marred.
  • Magnetic backing runs the full length of the cap to securely bond it to the vise jaw.
Check Stock

Hoppes Gun Vice w/Dry Kit HGVH

  • DIMENSIONS: 32.5 inch L x 11 inch W x 10.5 inch.
  • EASE OF USE: All 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop (hardware not included).
  • VERSATILE: Ball and socket articulating clamp pads allow for the pads to adapt to any firearm’s surface with height and length adjustable front and rear clamps.
  • NON-DESTRUCTIVE: Non marring, glass filled nylon vise/clamp construction.
  • DURABLE: Features a steel tube frame structure.
Check Stock

Hand Pin Vise with Silicone Sheets, findTop Resin Drill with 10 PCS Drill Bit and Silicone Place mat (Pink & Blue) for DIY Resin Crafts

  • DURABLE & EXQUISITE: The hand pin vise and drill bits are made of premium stainless steel, sturdy and durable. The handle has rough texture to facilitate the drilling work, fit for various DIY craft projects..
  • SILICONE SHEET: Made of high quality silicone, non-stick, non-skid, won’t fade, long-lasting, mess collector and surface protector, great assistant tool for DIY craft. Easy to clean..
  • DRILL BITS SET: The pin vise drill bits set contains 10 different sizes micro drills 0.8 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.5, 2.8, 3.0 (mm), all these twist drill bits are made of tough stainless steel and strong enough to use. All 10pcs are packed in a plastic box which has 10 compartments and according marks, prevent loss, and easy to distinguish..
  • WIDE APPLICATIONS: The hand pin vise set is a great choice for drilling wood, resin mold,necklace, earring, anklet, key chain, bracelets and more to make handcrafts by yourself..
  • QUANTITY: 1 x hand pin vise with 10 x drill bits of assorted sizes, and 2 pieces silicone sheets. If you are not satisfied with the product or there is any issue with the product, please contact with us and we will solve it for you..
Check Stock

GYZJ 6" Cross Slide Vise Drill Press Milling Vise, 6 in Jaw Width , 6.1 in Max Jaw Opening, Bench Mount Clamp Machine Vice Holder Clamping Tool for CNC Woodworking Milling Machine Drill Press

  • [Premium Quality Structure ]- The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Strong clamping force, not easy to move, operated simply..
  • [Smooth Guide Rail] - The guide rail surface is finely ground, and the parallelism is 0.1mm, very smooth and flat.The contact with the parts could be more precise, and the movement is smooth without jamming..
  • [Powerful Clamping Force] - The mill vice has a powerful clamping force and can fix workpieces very securely. Clamping force: 29 KN, Jaw width: 6", Max Jaw opening: 6.1"..
  • [Flexible Handle]-The handle rotates naturally and smoothly. Pursue precision in production process, which made the contact surface finely polished, reduces the jam during use greatly and the vise jaw can be easily adjusted..
  • [Wide Application] - Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Most work of the fitters can be completed by using this clamping vise such as sawing, filing, chiseling and some assembly and removal jobs..
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

jxgzyy 5 Inch Bench Vise Swivel Base Table Top Clamp with 360 Swivel Locking Base Cast Iron Workshop Bench Vise for Crafting Woodworking

  • Heavy Duty Casting: The durable Workshop Bench Vise is made of cast iron structure with blue power coated , resistant to corrosion ,rust and easy to clean . Designed for durable use ..
  • 360 Degree Swivel Base :360 dergree swivel base design , perfect for clamping from any angles. You can adjust to the angle that suitable for your work ..
  • Grooved Jaw :The grooved jaws design provides additional friction and grip your workpiece firmly .Provide you with anti-slip performance and stable clamping ..
  • Easy to install : With slots in base plate ,you can mounted it on your workbench quickly within few minutes ..
  • Wide Applications: This bench vise is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting ,drilling, gluing, metalworking ....
Check Stock