Best Switch Power Board

Skar Audio RP-1500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control 1500W

Class D MOSFET Monoblock Power Amplifier.
Peak Power at 1 Ohm: 1,900 Watts | RMS Power at 1 Ohm: 1,500 Watts.
Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz.
Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.
Stable at 1 ohm | Remote Subwoofer Level Control Included.

Class D MOSFET Monoblock Power Amplifier.
Peak Power at 1 Ohm: 2,800 Watts | RMS Power at 1 Ohm: 2,000 Watts.
Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz.
Featuring 4-Way Protection Circuitry and 1/0 AWG Power & Ground Input Terminals for Maximum Current Flow.
Stable at 1 ohm | Remote Subwoofer Level Control Included.

Locking Hose. 12-Foot Power Cord with Cord Wrap. 19-Foot Cleaning Reach with Hose and Power Cord.

Class D MOSFET Monoblock Power Amplifier.
Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts.
Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz.
Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150.
Stable at 1 ohm | Remote Subwoofer Level Control Included.
Highly Efficient Heatsink Design allows for Maximum Reliability & Performance.

Class D MOSFET Monoblock Power Amplifier.
Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts.
Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz.
Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150.
Stable at 1 ohm | Remote Subwoofer Level Control Included.

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..

【Running Board Lights】108 Led, 180CM=71INCH, DC 12V. Waterproof, Flexible RGB color, you can switch your favorite colors. Let your travel fascinating with 71Inch RGB Running Board Lights..
【Running Board Lights】 Smartphone APP Control, RGB multi-colors, Effect rgb running board lights, as long as you install the APP, you can set your own lighting scenarios in advance by adjust the change speed, brightness and stroboscopic speed..
【RGB Truck Running Board Light】Easy to install, Included double side tape at the back side.Easy to use,low power consumption. Note: Clean the place you are going to put the running board lights firstly..
【Universal Fitment RGB Running Board Lights】 This rgb running board lights can fit for: Pickup Trucks SUV Cars Work Van, etc. Please check your car's size before purchase..
【Package Included】 2 x 71 Inch RGB Running Board Light Strip..

Premium quality 24 volt 5.0 amp XLR HP8204B battery charger compatible with many mobility scooters and power wheelchairs that use off-board chargers with the XLR style charging connectors.Please Note: This charger is equipped with a dual voltage switch which allows the charger to alternate between 115 and 230 VAC. When used in the United States, the switch should be in the 115V position.This charger is a direct replacement for Pride Mobility's EA1065 model battery charger. It features a 115-volt.

[7X MORE PRESSURE] Than a garden hose and nozzle. For tougher cleaning jobs, 450 PSI is more cleaning power than the standard Hydroshot models.
[2-SPEED SETTINGS] But you can also switch it down to “Low” at 290 PSI to conserve both water and battery when the cleaning task is a little lighter.
[SAME BATTERY, EXPANDABLE POWER] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products.
[4-IN-1 MULTI-SPRAY NOZZLE] Four settings, from 0° for the most direct spray, to 15°, 25°, and 40° for a wider cleaning radius.
[ON-BOARD BATTERY CHARGE INDICATOR] The “fuel gauge” tells you how much juice you have left so you’ll know when to recharge or switch out batteries.
[DUAL-PORT CHARGER] Since this Hydroshot runs on two 20V batteries, we’ve included the two slot charger, to get you back in the game quicker.
[DRAW FRESH WATER FROM ANY SOURCE] Just drop the hose into a lake, pool, marina, or bucket—so you can take your Hyrdoshot anywhere.

Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
WiKi for reference: wiki.geekworm.com/T300.
A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).