Cable Matters Double Gang 5.1 Speaker Wall Plate (Home Theater Wall Plate, Banana Plug Wall Plate) in White
2 gang home theater wall plate can connect 5 speakers and 1 subwoofer.
Install audio wall plate in a standard double gang outlet or low voltage bracket for your home theater system.
Low-profile Speaker wire wall plate is 4.5 x 4.5 x 0.2 inches.
Screw type binding post banana plug wall plate with adjustable thumb screws can be used with banana plugs, spade connectors, or bare 12 to 18 AWG speaker wires.
5 speaker wall plate is labeled for the front, rear and center speakers.
Binding post terminals on speaker wall plate have red and black ring labels on the front and rear of the 5.1 wall plate for easy identification.
Subwoofer wall plate with a female coupler can connect an RCA subwoofer cable concealed behind the wall.
Install this speaker faceplate in the ideal location at an existing wall plate location or new outlet location for a 5 1 receiver upgrade.
Three-piece surround sound wall plate 5.1 includes a faceplate and two inserts for a quick installation.
Home theater wall plate with gold-plated binding post and RCA connectors provide a reliable connection and distribute authentic audio.
5 1 surround sound distribution wall plate connects 5 speakers and 1 sub.
Conceal cables behind the wall in your media room for a profes....
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Fly5D Best Dent Removal Kit, Most Complete Dent Remover Tool for Car with 97PCS Dent Removal Tools Repairs 99% of Dents on Car Body for Car Hail Damage and Body Dents、Creases、Dings Repair
EASILY CARRY OUT DENT REPAIR WORK：Fly5D dent puller kit contains all tools needed to car dent repair work. We are experts in repairing car dents. Our paintless dent repair tools can removal 99% of your car’s dents in 30 minutes. Whether you are a novice or a professional, you can easily complete the car dent repair work..
PAINTLESS DENT REPAIR：It is 100% paintless dent removal. The bottom of the bridge dent puller and dent lifter are made of rubber and will not damage the original paint. After the dent removal tool pulls out the dent, spray alcohol with a concentration of 90% or more on the remaining glue, the glue residue can be completely removed without damaging your original paint..
NEW UPGRADE：Different from most dent repair kit in the market, On the basis of the original packaging, we have added upgrade 43pcs puller tabs of different shapes and sizes, which are thicken and not easy to break, more durable than other puller tabs on the market. At the same time, The adhesion of our glue sticks is strengthened, and it is applicable to removal the dents in the hard position of the auto body..
REPAIRS DENTS OF ALL SIZES：Our dent repair tools are suitable for all different sizes of dents. Dent lifter can repair 1-4 inch dents. It comes with adj....
ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set
Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
GETLMUL Dent Puller Tool Kit, 108 PCS Auto Body Dent Repair Tool Kit with Dent Lifter,2 in 1 Slide Hammer, Aluminum Bridge Dent Puller for Auto Body Dent Removal, Minor Dent and Deep Dent Removal
High-Quality Dent Puller Tools Kit: Paintless dent puller tool is made of high-quality alloy and plastic, and the contact parts of the body are high-quality rubber precision packages, which can avoid damage to the original car paint..
Dent Puller Kit for All Requirements: Complete the dent puller kit to solve most dent repair problems. The dent puller, Bridge Dent Puller, Dent Lifter, and 2-in-1 Slide Hammer in the kit work together to make any dent repair process simple and easy. it’s environment friendly and will not heart the original painting of your car..
Easy to Use: Our car dent repair tools are very easy to understand and operate, and provide detailed manuals to guide you. Glue the heated glue on the pull tab, connect the pull tab to the depression, and wait for about 2 minutes to easily pull out the dent..
Dent Tool Kit Packaging Information:1*Golden Dent Lifter, 1*Silver bridge dent puller, 1*T-BAR for the repair of big dents, 1*Big Trigger Suction Cup, 2*Small Trigger Suction Cup,12*Black Dent Puller Tabs, 50*Blue Dent Repair Tabs, 1*100W Hot Melt Glue Gun, 10*Yellow Glue Sticks, 1*Rubber Hammer 9 X Tap down th....
U/D Dent Repair Kit - 2 in 1 Dent Puller Paintless Dent Repair with T-bar Dent Removal Kit(Long and Short Type),22 Glue Puller,2 Stainless Steel Grooves,2 Short Puller Lines and 2 Long Puller Lines
2 In 1 Car Dent Puller Kit: This T-bar dent puller can be detached into short T-bar puller, simple and quick, Good for small dent and lonG puller, hiGh-efficiency and effortless, Great for a larGe dent. Perfect for car dent repair.(NOTE: Only suitable for the diameter of the dent is Greater than 1.97inch and not suitable for corners or creases and dents on thick sheet metal such as the biG truck).
Important Notice: Attention: This dent puller item does not include Glue Gun, we suGGest user purchase hot melt Glue Gun to work with it.Paintless dent repair tool desiGn, dent repair tools set does not damaGe the oriGinal paint, provide you professional repair dent effect.
Professional Dent Puller Tool: Smooth texture feel and outstandinG looks, The product is very stronG and durable.Perfect auto body repair tool that is useful, helpful and so practical.Save your time and money for easy operation.
Universal Use: Easily do it yourself and repair the pits and hail dent.It has the advantaGes of simple operation, repair the dent for you directly.The car body dent repair kit can be repaired aGainst different dents, provide a more effortless way for you to repair.
Broad Utility: Not only utilized in car dent removal, but applied to all aspects in daily with similar ....
ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter
[Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
[Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
[Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
Use lubricant fluid for added ease (not included).
[Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
Pulls CV joints on 1986-current Taurus/Sable.
[Built to Last] Hardened hammer shaft provides strength and d....
OEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs
Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Highwild AR500 Steel Hostage Target 12' x 20' x 3/8' Armored Steel Bullseye Reactive IDPA Shooting Target with 2X4 T-Post Bracket
▶ Includes 12" x 20" AR500 hostage target, 4" AR500 top swivel paddle, 6" AR500 center swivel paddle and 2x4 + T-post mounting bracket.
▶ Targets are all laser-cut from 3/8" AR500 steel plate in our own facility. Great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Handguns should be used no closer than 10 yards and rifles 100 yards..
▶ Universal Target Mounting Bracket for use with either 2x4 board, T-post or Highwild adjustable steel post(All needs to be used with bracket fasteners). Holds target at an approx 20 degree angle..
▶ Fun Shooting - The Swivel Paddles use gravity to swing from side to side while shooting, different directions of movement will show the shooter different colors(Orange/Yellow)..
▶ The dulcet "Ding" will be heard in no second when hit and you will see your shots. Get it and have fun in your range shooting!.
