Magswitch 81101302 Vertical Featherboard Pro Table Saw Safety Attachment
PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw..
REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece..
EXCELLENT GRIP: Vertical Featherboard anchors to table saws for fences to provide downward pressure as it is cut to ensure that thin material does not bend or lift off the table.
compressible gaskets provide excellent grip when magnets are engaged..
CLAMP CONFIGURATION: Configured to clamp to the center of a steel table saw fence or at any point on the steel tabletop..
SNPO Dust-free Table Saw, 5000 RPM Tabletop Saw for Indoor Jobsite, Portable and Compact, 8-1/4-Inch(PRTW1A）
Active Dust Collection - There is a dust collection port system on this professional cabinet saw. It can catch up to 98 percent of the dust put off from your table saws. The dust chute will keep dust in one location, so you can effortlessly keep your surroundings dust-free..
Efficiency Cutting - Features a 20-1/2 inches of rip capacity and 2-3/8 depth of cut, this compact tabletop saw can easily zip through most of jobs even large pieces of wood, ensures a comfortable and smooth cut each time..
Powerful Cutting Performance - Equipped with strong 15-Amp engine, this table saw will produce 5000 RPM cutting power to slice through a range of wood fibers, fiberboard, plywood, block board and plasterboard..
Onboard Storage - The machine comes with in-built compartments. provides easy access to the blade guard assembly, fence, riving knife, miter gauge, wrenches, and push stick. Promote productivity as well as efficiency at work..
Durable and Sturdy - Metal roll cage base provides a sturdy setup, gives more durability and strength for the rear feet and protects the saw from accidental drops and impacts which might occur..
Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade.
XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered.
Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated.
Tall sliding fences support crown molding up to 7-1/2-inch nested and base molding up to 6-3/4-inch vertically against the fence while easily sliding out of the way for bevel cuts.
Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x10 at 45 degree.
Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)
[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
[SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
[DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
[ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw
NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
Easily taper table legs or use for construction and remodeling.
VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the ....
DEWALT Chop Saw, Quick-Change, 14-Inch, Old Model (D28715)
Powerful 15 amp/5.5 HP (maximum motor HP) motor of the chop saw provides more overload capacity, increasing performance and durability.
QUIK-CHANGE keyless blade change system of the metal chop saw increases productivity by providing the user the ability to change wheels without a wrench.
Exclusive QUICK-FENCE of the metal cutting saw is a 45-degree, adjustable fence designed for fast and accurate angle cuts without using a wrench.
QUICK-LOCK vise allows for fast clamping on different size materials to increase productivity.
Ergonomically designed -inchD-inch handle provides a more comfortable hand position, reducing fatigue and increasing productivity.
Extra wide solid steel base provides increased stability when cutting longer material. The four pre-drilled holes in the base allow easy bolt down to any work bench. The solid steel base also allows user to weld jigs or stops directly to the base..
Heavy-duty, lock-down pin allows head of the saw to be locked in the carrying position without the use of a chain.
Heavy-duty compression spring provides smooth movement and greater durability than torsion springs.
Spindle lock allows user to make wheel changes quickly and easily, saving time and money.
Large cutting capacity (5-inch round / 4-1/2-inch x 6-1/2-inch ....
DEWALT Table Saw, 10 Inch, 32-1/2 Inch Rip Capacity, 15 Amp Motor, With Rolling/Collapsible Stand (DWE7491RS)
Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual.
Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM.
Rolling stand designed for easy set up and breakdown with excellent stability.
Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate.
Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods.
Mini Table Saw, 4\ Mini Hobby Table Saw, Small Cutting Machine, Electric Portable Worksite Table Saw for DIY Handmade Wooden Model Crafts, Metal, Ceramic Tile, Glass Cutting Steel and Iron
Item may ship in more than one box and may arrive separately.
We took our new G1023RL table saw with riving knife and made it even better by including a built-in router table.
The router table includes support legs and universal T-track router clamping system and the Shop Fox Classic Fence.
You'll find that using this system is actually nicer and more convenient than using a typical router table.
