1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)
【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Rexka 10 Sets Engine Splash Shield Screws for Ford - T30 Torx Head Bolts and Grommets for Undertray Engine Fender Liner Deflector Grille for Ford Escape F-150 Edge Focus Fusion C-Max S-Max Lincoln
Meet or Exceed OEM Specification, Made of High Quality Durable Nylon not Plastic. Usually Used Together In Air Deflectors, Splash and Heat....
Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield....
Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut,....
Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus....
10 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm.
TOAOB 10pcs Screw Earring Backs 18K White Gold Plated Sterling Silver Threaded Screw Earring Backs Hypoallergenic Secure Locking Earring Backs Replacement 6x4.5mm for Studs Post
Suitable for threaded posts: Screw earring backs diameter: 6mm/0.24inch, fit 0.033inch/0.85mm post size.
It's perfect size to hold it screw on your stud earrings. Note: Only suitable for screw post and backs. Please allow 1-2mm error due to manual measurement.
High Quality Material: These earrings backs are plated in 18k white gold to ensure a long lasting finish. It is nickel free, lead free, and hypoallergenic 925 sterling silver earrings back, should not cause skin irritation.
Easy to Use:Simply screw the back on the post of your earring until it is sitting securely on your earlobe--Twist front to the right to wear on and turn left to unscrew.That is not only easier to maneuver, it avoids your hair becoming twisted into the back of the earring.
Secure Fit:Screw earring backs are used with screw posts.This provides added security compared to push-backs. Screw earring backs can be used for any earring with a threaded post, therefore screw backs tend to be a good option for high value earrings.
Safe Design:Screw earring backs is security, convenience and comfort. This special screw design allows you use it on your precious diamond and pearl stud earrings safely,enjoy all the date and party.
CGOLDENWALL Automatic Screw Feeder Machine Tapping Machine Supplier Screwdriver Feeder Microcomputer Control Digital Display Count Applicable Screw Size from M1.0 to M5.0 for Different Types Screws
INCREASE PRODUCTIVITY--The screw feeder will jam the arranged screws in the discharge port, and the next screw will come up automatically after the user removes one. Compared with the traditional screw plate, extracting each screw can save 1.4s with our machine, thus production efficiency can be improved by 4 times..
ALMOST SUB FOR YOUR BROAD--With its easy orbital adjustment, the screw machine can handle screws with M1-M5 (< 20 mm) between any specification. Ordinary screw, flat head screws, washers screw, tapping screw and so on, all can be applied to. So it especially suitable for the assembly of electronic processing plants such as toys, communication equipment, electrical appliances, toy auto parts, etc..
TWO TYPES OF COUNTING FUNCTION--Cumulative count: when a screw is removed, the machine will automatically count a number.
Fixed number counting: users can set the required number of screws. After taking the set number, the machine will beep once and the machine will automatically enter the next cycle of counting. Both method facilitates to count the production capacity and reduce the time for subsequent statistics and settlement..
CONVENIENT ADJUSTABLE MACHINE--All-metal supplier silo: sturdy and durable, the height of the brush in it can be adjus....
142pcs Threaded Inserts Repair Kit, Stainless Steel Helicoil Type Wire Insert Installation Set
【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
25 Pack 1-1/2 Inch Screw-in Hooks. Metal Hooks, Ceiling Hooks for Hanging Plants and Flower Baskets,Cup Hooks, Hitchen Hooks, Garage Hooks, Silver
►High-quality materials: The screw-in hook is made of solid high-quality metal steel and nickel-plated. The hook is firm and strong, with a smooth surface without burrs, and is durable. It protects the screw hook from rust, has strong corrosion resistance and is durable..
►Easy to install: Sharp eye points can bite into wood easily and quickly, and it is easy to screw them into ceilings, walls, trees, although pre-drilling is not required, but the best method is to drill a smaller pilot hole and screw in Ceiling hook.
►Widely used: The hook is suitable for hanging potted plants, lanterns, terrace lights, jewelry, towels, keys, cups, baskets, kitchen utensils, wind chimes, bird feeders and holiday decorations. Screw hooks are very suitable for indoor and outdoor use..
►Dimensions: The screw-in hook has a total length of 2.11 inches, a screw diameter of 0.17 inches, and a screw nail length of 0.61 inches. On the basis of ensuring durability, the screw-in hook has a good appearance and decorative performance..
►Screw-in hook is very suitable for indoor and outdoor use. It has a fixed force and is suitable for hanging objects. It is very convenient. It is my wish to let you use it happily. I look forward to your purchase, thank you! If you have any....
Coravin Screw Caps - Pack of 6 - Accessory for Coravin Timeless Wine by the Glass Systems and Wine Savers
What's Included: Six Coravin Screw Cap accessories in one pack of 6.
Experience Wine Differently: The Coravin Aerator enhances your wine experience by immediately mixing the right amount of air with the wine as you pour.
How It Works: Coravin Screw Caps combine self-sealing silicone with a premium cap liner to create a tight seal, protecting wine for up to 3 months.
Simply open the bottle by removing the screw cap, then immediately replace it with a Coravin Screw Cap.
The Technology: Coravin's standard size screw cap fits 98% of wine bottles.
Every Coravin Timeless wine-by-the-glass system's needle is slightly off-center so that you pierce a new spot in the cork or screw cap accessory every time.
Easy to Clean: When bottle is finished, remove Coravin Screw Cap and rinse with warm, clean water.
Do not submerge in water and do not use detergent.
