Best Taper Bushing

Set of Four (4X) Bourns 500K SHORT Split Shaft Audio Taper Low Friction Potentiometers

• SET of 4 500K Split Shaft Audio Taper Pots - 3/8" bushing.
• Each pot comes with hardware - 1X Hex Nut and 2X Washers.
• NOT FOR IMPORT GUITARS!! These pots are sized for use in U.S. made guitars..

CTS 500K Pot Short (3/8 inch) Solid Shaft Audio Taper - 10% Tolerance - Pair (2X)

• PAIR of CTS 450G POT 500K SOLID SHAFT Audio Taper Pot - 10% Tolerance.
• 3/8" High X 3/8" Diameter Brass Bushing 1/4" Diameter Brass shaft.
• 1/4" Diameter Solid Shaft - Requires Knobs That Fasten with a Set Screw.
• Mounting Hardware included. 1X Lock Washer, Dress Washer and Nut.

Anvil 8700129854, Cast Iron Pipe Fitting, Hex Bushing, 2" NPT Male x 1" NPT Female, Black Finish

• Hex bushing for connecting two pipes of different sizes.
• Male National Pipe Taper (NPT) threads on the outside and female NPT threads on the inside for creating tighter seals than straight threads.
• Made from cast iron for compressive strength and resistance to wear.
• Hexagonal head for increased leverage and use with a wrench during installation and disassembly.
• Black finish for corrosion resistance in oil and gas applications.

Anderson Metals - 38110-2016 Brass Threaded Pipe Fitting, Hex Bushing, 1-1/4' Male x 1 ' Female

• Hex bushing for connecting two pipes or with different diameters.
• Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends.
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
• Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
• Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Supply Giant CSCV1124 1-1/2'' Male x 1 Inch Female NPT Lead Free Bushing, Fitting with Hexagonal Head Brass Construction Higher Corrosion Resistance Economical & Easy to Install, 19

• Hexagonal Bushing for Connecting Pipes of Different Sizes.
• Female National Pipe Taper (NPT) Threads on One End and Male NPT Threads on the other for Connecting Different Types of Pipe.
• Made from Brass for Higher Corrosion Resistance than Steel.
• NPT Thread for Creating Tighter Seals Than Straight Threads.
• Certified to Meet NSF/ANSI 61-8 Standard for Quality Assurance.

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

• Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
• Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
• Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
• These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

19H150TL.1210 Ametric Inch Steel ANSI Timing Pulley with Flange, 1/2\ Pitch for a H150 Synchronous Belt, 19 Teeth, for 1210 Taper Lock Bushing, 3.02 Inch Pitch Diameter, Without Hub, 1-3/4\ Approximate Face Width, 1\ Approximate Width Through Bore...

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

• EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
• WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
• The OEM Tools bushing driver set includes 20 different size cups for versatile use.
• ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
• Don’t have to remove components from vehicles with this bushing tools set.
• ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
• Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
• MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
• Cups with bushing press and pull kit allow for hundreds of combinations.

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

• LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
• Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
• Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
• The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
• These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

• ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
• CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
• RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
• UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
• DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.