GM CLIMBING 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending
GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
LINCOUNTRY LED Flameless Short Taper Candle Battery Operated with Timer Flickering Flame, 4.7inch White Candlestick,Dripless Battery Operated Window Candle Halloween Christmas Home Wedding Decor,2pcs
FLAMELESS TAPER CANDLES WITH TIMER:these black flameless taper candles flicking is elegant white Taper candle with timer, battery operated flickering taper candles warm light continuously flickering make them look like real candles,led taper candles with timer are beautiful and realistic.
TAPER SHORT CANDLES BATTERY OPERATED WITH TIMER:These battery flicking taper candles made of plastic,Battery operated flickering taper candles Measures is H 4.75 x D1 Inch, each candle uses 2 AA batteries ( Not included ), tighten or loose the cap on bottom of the candle for ON/OFF, timer setting the candle to stay on for 6 hours and then go off for 18 hours.
BLACK TAPER CANDLES BATTERY OPERATED FLICKERING FLAME:These battery flicking taper candles made of plastic,Battery operated taper candles with timer led candles battery operated with timer flickering base of candle is tapered, perfectly fit standard taper holder and taper accessories.
TAPER TIMER CANDLES BATTERY OPERATED WITH TIMER:flameless LED lights, zero carbon emission, halloween led taper candles white flameless taper candles safe for kids, pets, seniors, Perfect for home décor....
VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)
Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.
FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
GM CLIMBING Pack of 2 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending
GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW
POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.
OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.
