Best Tapered Collet Reamer

ATOPLEE T Handle Reamer Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance,1/8-1/2 inch 3.18-12.7mm

  • {Good Quality Material}Made of hardened and tempered tool steel(45# steel) with precision ground cutting edges,more hardness and durable..
  • {T-Handle Design}Easy turning and sure handling .；The degree of the taper is:10.
  • {Many Usage}Enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.Also perfect for when a drill could cause cracking in sheet metal, plastic and other materials with little effort..
  • Total Length:140mm ；Shank Diameter:13mm.
  • {Package Included} 1pcs Hand Tapered Reamer.
Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

HHIP 3900-1625 5C Horizontal/Vertical Angle Collet Fixture

  • For any standard 5C collet For any standard 5C collet.
  • Lever movement to open or close collet. Base Size (horizontal): 5 x 4".
  • For any standard 5C collet Base Size (vertical): 5 x 3-5/8".
Check Stock

SpeTool Tungsten Carbide Tapered End Mill 1/4\ Shank 3\ OVL with 4.0mm Tips Diameter (2.0mm Radius) 2.2Deg for Woodworking Carving CNC Router Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 4.0mm tip diameter, 2.2Deg, TiAIN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock