Best Tapping Center

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Hotels Eagles California Tour 1977 Band Music Legend Gift for Fans T-Shirt Black

  • This shirt makes for a great staple t-shirt that compliments any outfit. It's made of a heavier cotton and the double-stitched neckline and sleeves give it more durability, so it can become an everyday favorite..
  • 100% ring-spun cotton. Fabric weight: 4.5 oz/y² (153 g/m²). Pre-shrunk for extra durability. Shoulder-to-shoulder tapping. Quarter-turned to avoid crease down the center..
  • This product is made and shipped in United States. Note: We only accept returns within 5 days of the order being shipped to the customer's shipping address..
  • Hotels Eagles California Tour 1977 Band Music Legend Gift For Fans T-Shirt.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell 5 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 5 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

Vintage Jonas Cool Brothers Happiness 80s 90s Gift for Fans T-Shirt Black

  • This shirt makes for a great staple t-shirt that compliments any outfit. It's made of a heavier cotton and the double-stitched neckline and sleeves give it more durability, so it can become an everyday favorite..
  • 100% ring-spun cotton. Fabric weight: 4.5 oz/y² (153 g/m²). Pre-shrunk for extra durability. Shoulder-to-shoulder tapping. Quarter-turned to avoid crease down the center..
  • This product is made and shipped in United States. Note: We only accept returns within 5 days of the order being shipped to the customer's shipping address..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
  • Vintage Jonas Cool Brothers Happiness 80s 90s Gift for Fans T-Shirt.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell 10 PCS M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock