Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Full Thread Length (LgV) = 27mm, Head diameter (脴dk) = 8mm, Bit not included.
Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 20mm, Full Thread Length (LgV) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Spax T-Star Plus, Plate Head Wood Screw, Partially Threaded, 4Cut mm A3J, 251010803405
Usage: for fixing rafters or roof insulation. Exclusive WIROX coating from SPAX.
Better traction during screwing thanks to washer head. Optimal power transmission and better fit on SPAX T-STAR plus T40 with guide pin, even with overhead work.
Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
Contents: 1 SPAX box, 50 wood screws, T-STAR plus, Washer head, Partial thread, 4CUT point, WIROX coating, Thread diameter (Ød1) = 8mm x Total Length (Ls) = 340mm, Length of partial thread (LgT) = 80mm, Head diameter (Ødk) = 20mm, Bit not included.
Nail Clippers for Thick Nails, 15mm Wide Jaw Opening Extra Heavy Duty Finger Nail Cutter
[STAINLESS STEEL] Nippes uses only hot-forged and hardened steel so consumers are guaranteed to enjoy their products for life..
[ERGONOMIC GRIP] Comfortable to grip and use for any application, Nippes tools lie perfectly in the hand, avoiding fatigue and discomfort..
[QUALITY ASSURANCE] All Nippes tools undergo thorough quality control checks before leaving the workshop, located in Solingen, Germany..
[TRADITIONALLY HANDCRAFTED] Nippes believes even the best precision machine can’t replace the human hand..
[MADE IN GERMANY] Nippes was founded over 90 years ago by brothers Ernst and Friedrich Nippes in Solingen, Germany, and is still run by the Nippes family today..
uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool
Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Drill America DWTB12X1.25 m12 x 1.25 High Speed Steel Metric 4 Flute Bottoming Hand Tap, DWT Series
Used to make new threads or re-thread damaged and/or jammed threads.
High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
High speed steel hand taps are the most versatile taps for hand use, or for tapping under power.
Hand taps are popular for use in general machine tapping or CNC tapping.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
uxcell Metric Machine Tap Left M5 Thread 0.8 Pitch H2 Accuracy 3 Flutes High Speed Steel
plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool
...re wear-resistant and prolongs the service life..
✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting will affect the tapping and even break the tap..
✅【QUALITY GUARANTEE】 We have carried out strict quality inspection and control on each drill tap bits set before leaving the factory, and the pass rate is above 99.99%. If you have any usage or quality problems, please fe....
Usage: Universal indoor or outdoor without direct exposure to weather elements. Exclusive WIROX coating from SPAX聽: Corrosion resistance 20 times stronger than standard white galvanized coating.
MULTI head: Easy penetration and simplified screwing. Mills in wood and stops on metal. Optimal power transmission and better fit on the T20 bit, even with overhead work, thanks to the T-STAR plus guide pin.
Power and battery saving: no need for pre-drilling (depends on wood). Easy screwing. Reduction of wood splitting with four-sided 4CUT tip. Typical SPAX corrugated profile for easier separation of wood fibers.
Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Countersunk head, Partial thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Length of partial thread (LgT) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
