Best Temp Bed

TPI 343C3 343 Dual Input K-Type Thermocouple Thermometer with Field Calibration

  • Dual input K-type with two CK21M, GK13M, A304, A908 carrying case (for Diff. Temp.).
  • 343C3 343 Dual Input K-Type Thermocouple Thermometer with Field Calibration.
  • Auto Field Calibrate in less than 10 seconds in ice water to achieve +/- 1degrees-F system (tester & probe) accuracy within 30degrees-F to 120degrees-F temperature range.
Check Stock

Maverick M Remote Smoker Thermometer [ET-73] - Gray

  • 500FT remote monitoring: Unlike with bluetooth meat thermometer limited range of only 100ft.
  • ThermoPro wireless thermometer for cooking provides best in class, reliable connection of up to 500ft to ensure you can monitor from anywhere.
  • Smart alerts & timer: Always stay informed with our smoker thermometer allows you to view temp and timer simultaneously.
  • Once the food temperature reaches your preset temp, bbq thermometer will beep and flash.
  • Accurate dual meat temperature probes: Digital food thermometer features high heat resistant meat probes, measuring temp range from 14℉ to 572℉ with an accuracy 1.8°F/1°C to let you Cook Like a Pro.
  • 8 temp presets and BBQ mode: Kitchen thermometer for food features a HI/LOW temp setting to monitor the ambient temp of your oven/smoker/grill and know exactly when to add more fuel.
  • Large backlit display & simple interface: Large display coupled with a simplistic interface, allows you to operate the device with ease.
  • Probe thermometer for smoker features a unique anti-slip grip to reduce the chance of accidents.
Check Stock

K&H Pet Products Lectro-Soft Outdoor Heated Pet Bed Large Tan 25

  • Outdoor heated dog bed with soft orthopedic foam. Includes free fleece cover.
  • Thermostatically controlled to automatically respond to tempature changes to warm to your pet’s normal body tempature.
  • Ideal for sheds, garages, barns, or any sheltered area your outdoor pets hang out.
  • 5-1/2 feet steel wrapped cord and only 60 watts.
  • This heated dog mat has been tested &.
  • certified by MET Labs to exceed USA/CA electrical safety standards.
  • If you have questions, please contact us at 1-877-738-5188.
Check Stock

VAGKRI Portable Air Conditioners 12000 BTU, 3-in-1 AC Unit with Fan & Dehumidifier Cools up to 400 sq. ft, Portable AC with ECO Mode, 3 Fan Speeds, Auto Swing, 24H On/Off Timer, Remote Control

  • ...ur room up to 400 square feet in an instant, stable and efficient way to make you feel cool all the time in the hot summer..
  • 3-in-1 Portable Air Conditioner & Eco Mode: Meet your needs of coolness, dehumidification and ventilation with 3 personalized functions: Cool, Dehumidifier and Fan Mode.
  • With built-in internal temp-sensor, Smart Eco Mode and Auto Mode both are money-saving and let you have a suitable temperature for relaxation and all night sleep in the wonderful summer..
  • Auto-swing & 3 Fan Speeds: The 80-degree wide-angle airflow with auto-swing function cools down your room in all directions, angle can be freely adjusted and the air is flowing evenly in the whole room to ease you and your families.
  • Personalize your dream cool temp with 3 fan speeds and a wide temperature range from 59 to 88°F in 1°F increments..
  • LED Panel & Full-Function Remote: Our portable ac unit is fully equipped with an easy-to-read LED panel, full-function remote control and 24h timer switch for you to change the modes or temp in your room simply.
  • additional temperature display on the front of the ac allows you to see the temperature from a distance or in the dark from afar.
  • water-full/water draining reminder helps you to keep the living space dry and cool..
Check Stock

Portable Electric Bed Bug Sanitation Heater | Professional-Grade | Heat Treatment System and Equipment | Get Rid of Bugs | 19,000 BTU | ePRO 400 XP bundle package for 400 - 600 sq foot room | Green

  • 100% KILL: All the equipment and training you need to obtain a 100% kill of bed bugs 100% of the time, every time! Modern bed bug populations are....
  • WHAT’S INCLUDED: This package includes a powerful ePro 400 XP electric heater, an Air Mover 4000, 4 power cords, 1 hand-held laser temp sensor, and....
  • EPRO 400 XP ELECTRIC HEATER: Powerful 19,000 BTU output. Portable and lightweight weighing only 28 pounds with dimensions 18"L x 14"W x 18"H. The....
  • AIR MOVER 4000: Strong 4000 CFM output. Portable with built-in handle for convenient storage and transportation. Lightweight weighing only 33 pounds....
  • BUY WITH CONFIDENCE! All GreenTech Heat heaters come with a 2-year repair or replace warranty along with 100% guarantee kill 100% of the time as long....
Check Stock

SZELAM 500W Aquarium Heater Submersible Fish Tank Heaters with Intelligent Temperature Probe and LED Display External Temperature Controller,for Fish Tank 79-120 Gallons

  • 【External Temperature Controller with Dual Temp Displays.】 With dual LED digital displays, you can observe water temp and set temp of fresh or....
  • 【Precise Temperature Control with Temp Probe.】 Our aquarium heater has sensitive temp probe, which is more precise to control the heater temp,....
  • 【Top Quality Material Brings More Safety Guarantee.】 Made of thick quartz tube heating rod, with black grit and thick ABS black cover, which....
  • 【Built with Overheat and Water Shortage Protection.】 This submersible aquarium heater is more sensitive and intelligent to resist overheat and....
  • 【Super Easy to Setup with Wide Compatibility.】 This 500W submersible heater is suitable for 79 to 120 gallons fish tank and the power cord and....
Check Stock

AQQA Aquarium Heater 500W for 66-135 Gallon Submersible Fish Tank Heater 75 Gallon Betta Fish Heater Aquarium Thermostat Heater for Coral Marine & Freshwater Aquarium (500W, 66-135Gal)

  • ...h more heat-resistant than ABS material, can resist up to 180℃.
  • The heating rod is made of explosion-proof and insulated quartz glass.
  • Double sealing and waterproof, preventing leakage of water and electricity. Much safer for human and your lovely fishes..
  • 【Intelligent Temp Control Range 59-93 ℉】AQQA aquarium heater adopts nickel-chromium heating wire, features fast heating, high precision of temp control. The heater will power off automatically when reaching the set temp and will start heating again when the water temp is 1℉ lower than the set temp. Alway provide a safe and comfortable living environment for your fishes..
  • 【Easy Installation and Temp Setting】You can install it at any angle by 2 powerful suction cups, just make sure it is under water fully. You can set temp with an external temp controller, press the button for 3 seconds to switch beween ℉ and ℃,and every press to adjust 1 ℉ /℃. Easily adjust the temp without hands getting wet. (Note: the controller is not waterproof).
  • 【Heater Protection System】 With anti-dry heating and overheating protection, when the heater is not fully immerge....
Check Stock

hygger 500W Aquarium Heater for Fresh-Water Salt-Water, with External Digital Display Thermostat Controller and Thermometer, Auto Quartz Submersible Heater for Fish Tank 60-120 Gallon

  • 【Quickly Heat Up】Voltage 110-120V/60HZ, power 500W, US three-pin plug, heater rod length 10.5 inch. Fast heating up aquarium heater, it takes about 3 minutes to heat 3.5 gallon water up 3℉.
  • 【Auto on and off 】Reliable submersible aquarium heater. It will stop heating when the water temp reaches to the set temp, please note that the water temp may go up 1℉ more because of the waste heat. When the water temp is cool down to 1℉ less than the set temp, the tank heater will restart heating.
  • 【Fully Submerged】The heater tube and the separate sensitive thermometer must be completely submerged under water all the time. Please unplug it and wait it to cool down before you removing the heater or doing water change.
  • 【Led Display Controller】Only show Fahrenheit degrees. To set the temp, just press the button over and over until the screen displaying the temp you desired, then stop and wait the digit flashing for 3 times, the setting is done and the led shows the current water temp again.
  • 【For Long Time Use】Very durable and explosion-proof aquarium heater, can be used for saltwater and freshwater aquariums, service life can be 3 years or more. With low profile black plastic guard, easy to hide in the tank. Contact the seller at first time if h....
Check Stock

Electric Gooseneck Kettle Temperature Control & 5 Variable Presets, Pour-Over Tea Kettle for Coffee Brewing, Stainless Steel Inner, 1200W Rapid Heating, Temp Holding, 0.8L, Matte Black

  • 【±1°F Temp Control】KOIOS electric gooseneck kettle allows 1°F temp adjustment from wide range between 104 to 212°F. Built-in LCD panel indicates realtime & target water temps. 5 Temp Presets meet needs of different drink, such as Black tea, Coffee, Oolong, Green tea, White tea..
  • 【Rapid Boiling & 2 Hours Hold Temp】With a 1200W powerful base, KOIOS electric tea kettle can boils up a FULL POT water(0.8 liters) in only 3 minutes. Select your desired temp and press "Keep Warm", electric kettle water boiler will heating as program till reach target temp and hold temp up to 2 hours..
  • 【Pure Taste & Precise Pouring】Every surface that water contacts is made of food grade 304 stainless steel, without silicon, plastic or chemical linings, keeps the original taste of your coffee or tea. Swan-like leakproof spout offers a smooth and steady pour-over flow rate, perfects for manual drip brewing..
  • 【Safety Features】Built-in STRIX NTC thermostat offers boil-dry protection and auto-off function. When kettle temp heating reaches 212°F with no water left or 2 hours Keep Warm Mode times up, gooseneck ket....
Check Stock

3D Printer Filament - 1KG(2.2lb) 3 mm, Dimensional Accuracy PLA Multiple Color (Black, 3mm)

  • 1 KG (approximately 2.20 lbs) Spool. 3.00mm Filament Diameter about 115m (Dimensional Accuracy +/- 0.05mm)..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock