EMF Meter Digital Electromagnetic Field Radiation Detector 3 in 1 Electric Field & Magnetic Field & Temperature Tester LCD Display Handheld for Home EMF Inspections Office Outdoor and Ghost Hunting
3 In 1 EMF Tester: This portable handheld EMF meter is designed to test the magnetic field radiation (units mG/µT), the electric field (unit V/m),....
Sound & Light Alarm: Equipped with a built-in electromagnetic radiation sensor, the tester provides precise measurement and shows radiation values on....
Multifunctions: Press the Max button to lock the peak value, and one key hold the data for a view. LCD backlight can be turned on and off, and there....
Wide Application: With a large frequency range from 5Hz to 3500MHz, this EMF tester is widely used for testing TV, mobile phones, computer, microwave....
Easy to Use: Ergonomic design, one-handed operation, clear large LCD display, easy to move for on-site measurements, effectively identify the signal....
Underground Wire Locator Upgrade, RockyMars Cable Tester for Invisible Fence for Dogs, Circuit Breaker Finder, Electric Fence Wire Tracer, Wire Break Locator, etc.
Suitable For: Locating and tracking buried and hidden wires, cable locator, wire tracker, dog fence wire break locator, invisible fence wire break locator, electrical wire tracer, network cable tester, electric fence tester, etc..
Range of Parameters: Tone frequency 200 kHz, Wire tracer range-up to 24 inch deep and 2400 feet in length, Power: 2 9V batteries(included)..
Where You Can Locate: Locate-Determining Which Receptacles are on specific circuits, track-Pinpointing Drill Sites before drilling..
External Earphone: Get a free Earphone with a package. It can be connected to the Receiver earphone jack to improve efficiency in a noisy environment..
Warning: Do not use on live circuits to avoid damaging the Tester! This device is only to locate a non-energized Cable. Only for single-core or double-core wire, NOT FOR multi-core wire and bundled wires. Only for wires & cables, not for sprinkler or irrigation valves..
The testo 760-2 amprage tester is ideal for electric testing on refrigeration, air conditioning and heating systems and allows for quick and convenient application.
Equipped with an auto-test setup, the volt meter offers precise readings, detects the lead connection, and prevents switching from V to A or A to V if leads are not in proper socket.
To eliminate mistakes, save time and optimize accuracy, the voltage tester automatically detects testing and selects the correct meter configuration.
Thanks to the rugged housing that the lead holder was conveniently molded into, the HVAC tool with its backlit display offers reliable durability in almost every environment.
Includes the 760-2 voltage meter, including test leads, 3 AAA batteries, type K thermocouple adapter, instruction manual, quick start guide, and certificate of conformity.
USB C Tester,KJ-KayJI 2 in 1 Tester Color Screen IPS Digital Multimeter(2022),Voltage,Cur,Pwr,Resistance,Elec,Temp,Capacity,Tme,Fast Charging,with USB Clip Cable Support PD2.0/PD3.0,QC2.0/QC3.0,BC1.2
... your USB-enabled or type c-enabled devices. Supports QC3.0, QC2.0 and BC1.2. A Must Gadget checks the charging performance (charging speed and quality) of the output wall/car/solar panel chargers and USB charging cables. It can be also used to find the highest current of the Wireless Charger, and test capacity and electric energy of power bank..
PROFESSIONAL SAFETY GUARD: Featured with over-voltage protection, over-current protection, under-voltage protection, low energy protection and alarm system. This upgraded USB Type C tester can detect safety and maximally protect the appliances from damaging. It will cut off output automatically and alarm by sound, while it will save data when power off suddenly..
MULTIPLE COLOR SCREEN DISPLAY MODES: New upgraded version offers 8 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. With the new interface settings, this instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, D+/D- voltage and other data of USB..
WIDE RANGE OF APPLICATION: Thanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. (Support iphone 8 / 8P / iPhone Xs quick charging, 29W po....
QPKING Electric System Circuit Tester,Automotive Electrical System Tools,9V-30V Electrical System Diagnostic Tool With 2.4-inch LCD Display
[Multimeter Mode&Smart Test]: Electric System Tester is covered with comprehensive parameters of Multimeter, it can quickly test and automatically identified the Voltage, resistance, Positive and Negative poles of the tested component, which brings the user a lot of conveniences..
[Oscilloscope Mode&Relay Test]: Car Electric System Tester is not only able to display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc, but also can test the common automotive relay, like 5-terminal relays, and 4-terminal relays..
[Component Activation&Injector Mode]: It can generate "Active" signals for components, such as lights, motors, and other on-board electronic devices. Also different pulse signals can be output to the injector, which provides 4 pulse modes to better detect the condition of the injector..
[0-5V Power Supply&Voltage Alarm]: Capable of setting 0-5V output voltage, used to verify the wiring condition of the tested component. Equipped with voltage setting alarm. If a short circuit or fault causes the voltage to be greater than or less than the set value, the device will alarm..
HURRICANE Non-Contact Voltage Tester and Receptacle Tester Kit, Electrical Socket Voltage Tester/12-1000V AC Voltage Detector Pen, and GFCI Outlet Tester/Receptacle Tester for Standard 3-Wire 120V
...2-1000v ac voltage detector, and a receptacle tester to meet most electronic testing needs, ideal for laboratory, education, factory, workshop, and household use.
【Non-contact Voltage Detector】This non-contact voltage detects AC voltage within 12-1000v AC, indicating voltage by flashing red LEDs, It can test all electric appliances in your family, and also has a pocket clip and a tip that fits into outlets or against wire insulation.
【Safe and High Efficiency】The voltage pen tester detected voltage in a non-contact way, so do not worry about there could be any possibility of being shocked by the electricity, as long as the voltage is detected, the led in the tester pen will shine.
【Outlet Tester】Push “GFCI TEST” Button, in the test wiring qualified socket, through the GFCI test simulates the presence of leakage protection inside the connection room to start the power-off action, especially in the kitchen or bathroom. Protect the safety of electricity (recommended once a month test). Quickly determine the correctness of standard 3-wire receptacle L-N-G wiring and read the results by bright red and green LED indicators..
【Wide Application】A set of quick-fix tools provides non-contact detection of standard voltage in cables, cords, circu....
Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey
TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
The device also can be used as a signal generator for electric speed controller (ESC).
With it, you can test your motor system without using a transmitter and receiver.
There are 3 modes to check servos or ESC,the ability to easily detect and configure the server's virtual spaces, jitter and median. It can connect 3 servos of the CCPM helicopters and select servos.
What you will get is: 1 X Servo tester. Any question, pls feel free to contact us.
HT-1201 Digital Vibration Meter Vibrometer Acceleration Sensor Gauge Analyzer Tester for Vibration Speed Acceleration Displacement
【Widely Used】Digital Vibration Meter Tester adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields..
【Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement, press the probe against the measured objects perpendicularly..
【Parameter Reference】Measurement range: acceleration: 0.1-199.9m / s2 (peak value), speed: 0.1-199.9mm / s (effective value), displacement: 0.001-1.999mm (effective value), measurement accuracy: ± (5 % + 2digits), temperature accuracy: ± 2 ℃, frequency range and other parameters have been listed in the description, please confirm the parameters before buying..
