Best Tft Backlight

EVERSECU 4pcs Wireless Vehicle Backup Cameras Plus 7\ Monitor Parking Assistance System for RV/SUV/Van/Pickup/Truck/Trailer Rear/Side/Front View System Switchable

  • The 7 inch Car lcd monitor comes with 4CH video input, Press V1/V2 button to switch the video from one to another. 7" LED Backlight Color TFT LCD monitor. Works perfectly with car rearview cameras, supports Car DVD,serveillance camera, STB, satellite receiver and other video equipment..
  • 4 x HD Reverse camera Build wireless Sender,18 LED lights Night Vision,IP68 Waterproof Mudproof color with 120 degree wide viewing angle and without Guide Lines.
  • The Vehicle backup cameras kit comes with a remote controller and instructions for easy installation:Connect the antenal with the cameras and monitor,Connect cameras power by DC Cable to reversing light or directly connecting to car 12v-24v,Connect the monitor by DC car charger or DC power cable to 12v/24v.
Check Stock

693711-001 677774-001 65W AC Adapter Laptop Charger for HP-Pavilion G4 G6 G7 G60 G61 G72 M6 DM4 DV4 DV5 DV6 DV7 HP 2000-2A20NR 2000-2B09WM 2000-2B19WM 2000-2B29WM 2000-2C29WM 2000-2D19WM 2000-329WM

Check Stock

DIYmall Mini PiTFT 1.3″ LCD Display 240×240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color(Pack of 2PCS)

  • TFT size: 1.3″ diagonal, Voltage:3.3V, Interface:SPI, Driver: ST7789, Color:Full color.
  • The Mini Pi TFT 1.3 ” – 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display..
  • The Mini Pi TFT comes with a full color 240×240 pixel IPS display with great visibility at all angles..
  • The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case..
Check Stock

HP Business Z32 31.5 Inches 4K UHD WLED LCD (3840 x 2160) Black Pearl Monitor Display, Model:1AA81A4#ABA

  • ... Hz| Pixel Pitch: 0.181 mm| Pixel Per Inch: 140| Brightness: 350 cd/mý| Contrast Ratio: 1300:1 / 5000000:1 (dynamic)| Response Time: 14 ms (gray-to-gray)| Vertical Refresh Rate: 29 - 60 Hz.
  • Horizontal Refresh Rate: 28 - 135 kHz| Horizontal Viewing Angle: 178| Vertical Viewing Angle: 178| Screen Coating: Anti-glare| Backlight Technology: WLED| Features: HDCP, anti-glare, 99% sRGB color gamut, Mercury free, arsenic-free glass, 100% BT.709 color gamut| Color: Black| Dimensions (WxDxH): 28.1 in x 9.8 in x 22.2 in - with stand| Weight: 26.81 lbs.
  • Interfaces: DisplayPort Ý Mini DisplayPort Ý HDMI Ý Audio line-out Ý 3 x USB 3.0 downstream Ý USB 3.1 upstream (Type C) Ý USB 3.1 downstream (Type C)| Display Position Adjustments: Height, pivot (rotation), swivel, tilt| Tilt Angle: -5/+20| Swivel Angle: 90| Height Adjustment: 4.7 in| Flat Panel Mount Interface: 100 x 100 mm| Features: Security lock slot (cable lock sold separately)| Cables Included: 1 x USB cable - 6 ft Ý 1 x DisplayPort cable - 6 ft| Backlight Life: 30,000 hours.
  • Compliant Standards: VCCI, BSMI, NOM, TUV S, WHQL, CB, CCC, PSB, ISO 9241-307, KCC, WEEE, MEPS, KC, CECP, CEL, EAC, ISC, SEPA, low halogen, ICE| Localization: English / United States| Voltage Required: AC 120/230 V (50/60 Hz)| Pow....
Check Stock

Hopcd 10.1-inch Computer Monitor,1080P Ultra Thin 16:9 WLED Backlit TFT LCD Display Monitor,VGA+HDMI+BNC+AV+USB Input / 130°(H) x 115°(V) Viewing Angle/3Wx2 Speaker Gaming Monitor(100-240V)

  • 10.1-inch high-definition widescreen display supports up to 1080P, supporting multiple source inputs (AV, VGA, HDMI, BNC).
  • For the connection of professional security monitoring equipment, the signal mutual interference is reduced, and the best signal effect can be achieved..
  • For multi-language menu, with dual speakers, and for random delivery base, it is easy to install..
  • With WLED backlight, of TFT LCD screen with 800:1 contrast, it supports display and button adjustment..
  • Made of materials in high quality, it is entitled with high performance, which is durable to use..
Check Stock

Riiai 2-in-1 Digital Oscilloscope & Transistor Tester, Real-time 2.5MS/s Sampling Rate 200kHz Bandwidth, 2.4 inch TFT Color Screen, PWM Square Wave Output, Diode Voltage Continuity Tester

  • ...ester adopts a built-in 1500 mah battery that will get fully charged within 1-2 hours via a 5V/2A adapter and can work for 4 hours(Finish Green Indicator/Charging Red Indicator). The digital handheld pocket oscilloscope and transistor tester are designed with a high-resolution 2.4-inch TFT screen with an adjustable backlight. Better reading experience and easy to use..
  • ⭐【Multiple Interfaces & Easy to Operate】--- The pocket oscilloscope can test different functions that supports multiple interfaces screen display. With press button design, it is more convenient to operate and choose the different test function mode. Pocket size and lightweight feature provide users with more possibilities and fun in using the portable storage oscilloscope..
  • ⭐【Wide Application】--- The digital oscilloscope supports online operation with a computer that users can refresh the official firmware by themselves and complete the upgrade. It is especially suitable for the fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small-batch components. It can auto-identify and measure various transistors including NPN and PNP transistors, diodes, double diodes and etc..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

Thometh Multitester-MLC500 LC Meter 500kHz Digital Capacitance Inductance Meter Auto Ranging Component Tester, Black

  • ...tures high accuracy, fast speed, and long standby time. 99,999 maximum reading with accuracy up to 0.1%. Test frequency (100Hz, 120Hz, 1kHz, 10kHz). Test signal level (0.1Vrms, 0.3Vrms, 1Vrms). Maximum test speed: 20 times/s. Constant 100Ω output impedance. Auto LCR..
  • 2.8-inch TFT LCD display. High-brightness white backlight. Data hold. Recording mode. Standard Mini-USB communication interface. SCPI command set. Perfectly fit the measurement and screening of inductance, capacitance, and resistance in production lines, maintenance points,etc..
  • Built-in rechargeable battery with large-capacity. 8h long battery life. For evaluation of resistance, parameters of capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components, network components, circuit boards, relays, switches, cables, batteries, etc..
  • Reliable & Easy to Use. LED alarm for tolerance. Certified CE and RoHS. What you get: 1 x UT622A LCR meter, 1 x power adapter (5v/1a), 1 x UTR-002 Alligator clip test leads with rubber plugs (pair), 1 x UTR-001 plated short circuit board, 1 x USB cable, 1 x paper manual (En), 1 x gift box..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

Temtop Air Quality Monitor CO2 Detector Professional Carbon Dioxide PM2.5 PM10 Formaldehyde Temperature and Humidity Monitor w/Audio Alarm Data Export (M2000 2nd)

  • 8-IN-1 MULTIFUNCTIONAL CO2 MONITOR. Adopts SenseAir NDIR carbon dioxide sensor, Dart HCHO sensor, and Temtop professional-grade particle sensor. Gather the world's top technology to provide you with comprehensive air pollution monitoring..
  • AUDIO ALARM AND COLORFUL AIR QUALITY LEVEL INDICATOR. Know the air at a glance, you can also set the alarm threshold according to your needs..
  • DATA EXPORT AND EASY CALIBRATION. Export full data via USB including CO2, PM2.5, PM10, HCHO, particles, temperature, and humidity. Built-in calibration program for CO2 and HCHO. The RAM supports more than 3 months of continuous data logging..
  • SUITABLE FOR BOTH INDOOR AND OUTDOOR. Adopts colorful TFT display with backlight, ergonomic design, and rechargeable large capacity battery, you can use it for home, office, lab, or carry it to travel..
  • WHAT YOU GET. M2000 air quality monitor, charging cable, carry case, user manual, Temtop 12-months warranty & 24/7 customer support access via email and phone..
Check Stock

Ferwooh Nextion 3.5'' Display NX4832T035 Resistive Touch Screen HMI TFT Smart Module LCD for Arduino Raspberry Pi ESP8266

  • The 3.2 tft lcd expansion board is compatible with arduino mega 2560.
  • With tft lcd shield, you can use 3.2 touch screen with mega more conveniently.
  • This 3.2" lcd shield is NOT compatible with all 3.2" tft lcd. Please chheck it carefully..
  • You can buy 3.2" tft lcd for the shield by "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock