【Easy to Use】 aremnry harmonic balancer puller saves your time by safely and quickly removing balancers without tapped holes, making a difficult job much easier. No need to remove the radiator!.
【Benefits of Tools】 The tool has sufficient weight and strength to ensure that it will not break during use. Made of special carbon steel, the surface is sprayed with anti-oxidation and corrosion paint, corrosion resistant and very durable..
【Unique Design】 Harmonic Balancer Puller features a "clip-in" design allowing removal without bolting the puller to the balancer. Compatible with Jeep/GM/Chrysler/Dodge balancers without threaded holes..
【Applications】 GM APPLICATIONS: 5.3 L, 5.7 LS1, 6.0 LS2, 6.2 LS3, and 7.0 L.
CHRYSLER, JEEP, DODGE APPLICATIONS: 3.5 L V6, 3.6 L V6, 4.7 L V8, 5.7 L V8, 6.1 L, and V8..
【Not Fit】 Not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. If you have any question, please feel free to let us know..
【 Must Have 】EWK harmonic balancer puller set applies equal pressure to the hub, helping to remove harmonic balances, crankshaft pulleys, and steering wheels safely..
【 Mutiple Use 】Includes 30 different bolts, a pressure screw, 3 adaptors, 18 washers, and a 4-slot yoke that allows you to use with flywheel, crankshaft, steering wheel, pulley and other two or three-hole applications..
【 Completely Kit 】This puller kit includes the most needful SAE and metric bolts sizes (1/4""-28, 5/16""-18, 5/16""-24, 3/8""-16, 3/8""-24, M8x1.25, and M10x1.5) and washers sizes (ID 6mm, ID 8mm, ID 10mm, ID 12mm)..
【 High Quality 】Crafted from heat treated carbon steel with oxide finishes ensures maximum strength, helping the tool withstand tough pulling jobs and resist rust..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Vbest life Tru-Spin Prop Support Balancer for Multirotor Airplane RC Helicopter Black (Black)
High-quality Hardened Material: The tru-spin prop balancer is made of high-quality hardened material,more durable..
Wide Range of Uses: Balance various sizes and weights of aviation props, nautical props, helicopter rotor heads, trimmers, wheels, jet fans, flywheels, etc..
Accuracy:Safely center, lock the props on the balancing shaft ,high accuracy..
Full Adjustable :Full adjustable pitch propeller balancer..
Perfect Balancing:With precision machining of rotating wheels ,perfect balancing is easy..
Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine
Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines
【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
MECCANIXITY Retractable Spring Balancer Tool Holder Hanging Equipment 3.3-6.6lbs (1.5-3kg) for Assembly-line with Fitting Accessory
Spring balancer is an auxiliary tool for hanging production operation equipment..
Retractable spring balancer is in specification of Capacity: 3.3-6.6lbs (1.5-3kg).
Size: 145mm x 100mm x 38mm / 5.71 x 3.94 x 1.5 inch.
Solid metal construction provides continuous and repetitive work on your assembly line for hanging, carrying, and removing tools..
It can manually lock the position of suspended objects to avoid falling of suspended objects, easy to operate pneumatic, electric and hydraulic tools..
Please confirm the weight of your suspended items and choose the right load..
