Best Thermocouple Armored Thermocouple Cable

REED Instruments R2800 Temperature Simulator (Thermocouple and RTD)

  • Source 8 thermocouple types, including R, S, B, E, K, J, T, N.
  • and 7 RTD types, including Pt 10 (385), Pt100 (385), Pt200 (385), Pt500 (385), Pt1000 (385), Cu10, Cu50.
  • Includes test leads, alligator clips, thermocouple adapter, protective holster and batteries.
Check Stock

General Tools IRT659K Infrared Thermometer K Type Thermocouple 12 1

  • Infrared thermometer measurement range is -58 to 1202 degrees Fahrenheit (-50 to 650 degrees Celsius).
  • K type thermocouple measurement range is -146 to 2498 degrees Fahrenheit (-99 to 1370 degrees Celsius).
  • Thermometer measure is K-type thermocouple with 0 to 500 degrees F (-18 to 260 degrees C) range.
  • Digital thermometer automatically stores last 10 readings for recall.
Check Stock

Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing LP Propane

  • LP Propane GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE.
  • STANDARD 24" LENGTH total. Tubing and thermocouple length 22 inches.
  • FITS MANY WATER HEATERS ON THE MARKET BUT NOT ALL.
  • WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT.
  • Search for our 36" pilot if you need a longer one..
Check Stock

PIE 525B Automated T/C & RTD Calibrator 12 RTD & 14 T/C types

  • Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
  • Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
  • Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
  • Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
  • Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..
Check Stock

Dry Block High Temperature Calibrator Range 50 to 650°C with Thermocouples T J K N R S for Calibration Labs Pharmaceutical Divisions Thermal Plants Metallurgical Plants Model AI-DBC-02

  • Accuracy: ±0.025% of Reading + 0.25 mV | Volts Range: 0 to 10.000 V.
  • Accuracy: ±0.025% of Reading + 3 mV | Ohms Range: 0 to 400 Ohms.
  • Accuracy: ±0.025% of Reading + 0.1 Ohm | RTD3 Range: -200 to 8500 C.
  • Thermocouple Types: T, J, K, N, R, S | Thermocouple Range( T,J,K,R,S): -200 to 400°C.
  • Accuracy: ±0.025 % of Reading + 1°C |Thermocouple Range(R,S): 300 to 1760°C.
  • Supply Scope: 1 Unit of DBC-02 Dry Block Calibrator, Power Cable, 1 Unit of Test Lead (2 Wire), Insertion Tube: Dual Hole - 1 x 1/4” + 1 x 12.5 mm, Dual Hole - 1 x 1/4” + 1 x 8.2 mm, 1 Unit of Insertion Tool, 2no.s of 6A Spare Fuses, Instruction Manual and Factory Calibration Certificate | Applications: Calibration Labs, Pharmaceutical Divisions, Thermal Plants, Metallurgical Plants.
Check Stock

Jiffy J-2M Gray Steamer w/Metal Head/NEMA 5-15, 120V Cord Set

  • Probe Size : 90 x 1.5mm / 3.5" x 0.06" (L*D).
Check Stock

Digital k-Type Thermocouple Thermometer with Angled High Temperature Surface Probe Sensor

  • K-type Thermocouple Thermometer with handheld High Temperature Surface Probe SF-1.
  • Measure Surface Temperature up to 932 °F or 500 °C, NOTE: Thermometer displays up to 1999 degreeF, but 1300 °C.
  • LCD display: 3 1/2 digits , easy switch between °F and °C.
  • Miniature k-type thermocouple connector allows the use with a wide range of other thermocouples.
  • Accuracy: 1.5°C or 0.4% , Data Hold, Battery: 9V (included!).
Check Stock

K-Type Scientific Digital Thermometer DM6801 with high Temperature thermocouple PK-1000

  • Digital k-type thermometer with one input and extra thermocouple PK-1000.
  • Temperature Range: -58.0 to 1999.0 °F (-50.0 to 1300.0 °C).
  • Resolution: 0.1°F or °C or K Accuracy: 2.2° or 0.75% Data Hold.
  • Comes with k-type thermocouple wire probe that measures up to 1832 degree fahrenheit (1000 degree Celsius).
  • Battery: 9V (included!) Dimensions: 6" x 3" x 1.5" (149 x 71 x 41 mm) Weight: 7 oz (200 g).
Check Stock

Amprobe TMD-50 Thermocouple Thermometer K-type

  • Portable, dual-input thermometer for reading temperatures from two sources simultaneously, and is used in quality control and HVAC, electrical, industrial, and automotive maintenance.
  • Dual-scale temperature readings range from -328 to 2,498 degrees F (-200 to 1,370 degrees C).
  • Dual-input thermocouples for superheat and subcool applications, and cut-out and cut-in temperature measurements, and offset mode compensates for thermocouple error.
  • Backlit LCD screen with a data hold feature to save temperature readings for later viewing, maximum and minimum temperature with elapsed time, average and relative temperature calculations, and low battery indicator.
Check Stock

PZRT High Temperature K-Type Thermocouple Sensor Thermocouple Terminal Block Ceramics Terminal Block High Temp Porcelain Ceramic Connectors

  • Material: Made of high quality ceramic material, durable and long service life..
  • Accepts AWG 8 (3.3 mm) Type K thermocouples..
  • With high mechanical, high strength, high volume resistivity, good electrical insulation properties..
  • Unglazed ceramic thermocouple connector block for high temperature K-type thermocouples..
  • Package includes: 1 x Thermocouple Terminal Block..
Check Stock