Best Thermosetting Injection Machine

HOMIER 10 Pods Hydroponics Growing System, with 2.5L Water Tank, Indoor Hydro Herb Garden, Plant Germination Grow Kit with Automatic Timer, LED Grow Light for Home Kitchen (No Seeds)

  • Hydroponics Growing Circulation System: Intelligent full spectrum LED plant lighting system. It works for 16 hours a day, mimicking the brightness of the sun throughout the day, gradually brightening for the first two hours, then automatically switching between red light and blue light, and fading for the second two hours. Scientific lighting schemes are suitable for plant growth..
  • Adjustable Height: The maximum height of light source support rod can be adjusted to 15.7 inches, which can meet different plant growth stages and different height requirements..
  • 2.5L Capacity Graduated Water Tank: Add water according to different needs. When intelligent water pump is lower than the standard water level, it will give an alarm, and then automatically start after adding water. Intelligent cycle starts and stops at a certain time, to provide sufficient oxygen for plants..
  • Water Injection Orifice Design: water injection orifice is added in the edge design, so water injection can be completed without opening and closing the machine panel..
  • Suitable for All kinds of Home Planting: Suitable for kitchen, garden, living room and other family scenes, planting vanilla plants, mushroom plants, potted lamp, kitchen vanilla seedling cultivation..
Check Stock

Fibreglass Plate Sheet, FR4 Glass Fiber Sheet Panel Home Epoxy Glass Craft Supplies Template Fibreglass Plate Sheet DIY Portable Glassfibre Board High Tensile and Impact Strength FR4 Epoxy Fiberglass

  • FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass..
  • Epoxy Glass board is ideal for constructing many parts on your models, such as Control surface horns, servo trays, autogyro rotor plates and many general strengthening parts. For DIY handle.
  • Cloth material with an epoxy resin binder. It has characteristics of high strength..
  • Store at room temperature but also under humid or moist conditions..
Check Stock

Fibreglass Plate Sheet, FR4 Glass Fiber Sheet Panel Home Epoxy Glass Craft Supplies Template Fibreglass Plate Sheet DIY Portable Glassfibre Board High Tensile and Impact Strength FR4 Epoxy Fiberglass

  • FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass..
  • Epoxy Glass board is ideal for constructing many parts on your models, such as Control surface horns, servo trays, autogyro rotor plates and many general strengthening parts. For DIY handle.
  • Cloth material with an epoxy resin binder. It has characteristics of high strength..
  • Store at room temperature but also under humid or moist conditions..
Check Stock

220V Intubation Manikin Study Teaching Model Airway Management Trainer Intubation Manikin Study Tracheal Simulator (US Stock)

  • ▲Adopts imported PVC plastic material, injection molded by injection molding machine, with vivid image, real operation and reasonable structure. It can be oral nasal intubation training operations and teaching demonstration..
  • ▲During oral, nasal intubation training operation, insert the correct operation of the airway, electronic display and play music function, so the lungs inflate gas. The wrong operation insert the esophagus, electronic display and alarm function. Stomach gas expansion..
  • ▲Error makes laryngoscope cause tooth pressure, electronic alarm function. Observed and compared to normal side and the other side becomes large pupils..
  • ▲Suitable for medical college students, clinical medical staff, all kinds of on-site emergency personnel training, teaching demonstration through oral tracheal intubation technology and internship operation.
  • ▲Our product ship from US .Worry-free 36 Month.If you have any question about the product ,we support 24x7 hours prompt customer service..
Check Stock

Yowming 2 Pin KW3A 1PCS Normally Open+ 1PCS Normally Close Microwave Oven Door Micro Switch for Microwave, Washer, Rice Cooker 16A 125/250V

  • Voltage: 125V and 250V , Temperature resistance: 105° , Size: 3*1.6*1cm/1.18″*0.63″*0.39″ (L*W*H).
  • Package includes :KW3A microwave door switch(1PCS normally open + 1 PCS normally close).
  • Safe and reliable basic switch, beautiful appearance, compact structure, with small contact gap, fast action, high sensitivity and small action stroke..
  • Long life and high reliability. A wide range of terminal blocks, a wide range of operating forces, a variety of temperature levels. Made of thermosetting or plastic..
  • Widely used in various household appliances, electronic equipment, automation equipment, communication equipment, automotive electronics, instrumentation, power tools, etc..
Check Stock

Bosworth 0921092 Trim II Powder, Shade B1, 1.5 oz Capacity

  • ♥Notice:It must be used with a Dental Injection Molding Machine,needs to be heated to a temperature of 287±10°C. (about 550°F) and then injected into your dental mold.If you don't have the injjection machine with high temperature,not recommend this,please.
  • ♥Melting time:11-15min.10 cans(About 9g/can).Without Blood Streak..
  • ♥High translucent close to color of gums.Color is effected by the the heating time..
  • ♥Polish easily because of smooth surface..
Check Stock

TCMT Black Outer Bat Wing Front Upper Front Fairing Cowl Nose Head Fits For Harley Electra Street Glide Road King FLHR 1996 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 2013

  • Made from thick raw ABS injection-molded plastic, it comes with a nice smooth surface straight from the injection molding machine..
  • Fitment: Fit For Harley Electra Street Glide Road King FLHR.
  • Material:100% made of high quality ABS plastic (Not PVC) to guarantee a longer life time and product durability..
  • Color:Vivid Black (painted finish, gloss black) color matches Harley OEM color,OEM Part No. 58236-96 (for reference only)..
  • Package Include£º 1x Fairing(As Picture Shown).
Check Stock

APT Glass Cloth Electrical Tape, High Temperature Masking Tape, 260°C. UL Listed, White Heat Resistant Tape. Ideal for Class H Electrical, Powder Coating, Sand Blasting (3/4\ x 54 Ft)

  • 【Class "H" Electrical Insulation 】-Designed for use in 600-volt dry location applications requiring both high mechanical strength and resistance to high temperatures..
  • 【High Temperature Powder Coating Masking 】- High temperature glass tape removes cleanly at bake temperatures up to 260°C. Clean Removal, No Residue.
  • 【Extra Strong Backing】- Glass tape with super strong cloth backing, 7 Mil Total Thickness . Eliminating flaking and breaking during removal process..
  • 【High Adhesion】- The thermosetting adhesive provides an increased bond, once applied in areas of high ambient temperatures.
  • 【Corrosion Resistant】-Electrical clothes tape is specially designed and prepared to provide corrosion protection.
Check Stock

XMT-MOTO Front Outer Inner Batwing Upper Fairing Cowl with Speaker Enclosure Cover Fits for 2014-2019 Harley Davidson Touring Electra Glide Street Glide and Trike models

  • This is the perfect replacement for your cracked, worn, or scratched fairing shell!.
  • Made from thick raw ABS injection-molded plastic, it comes with a nice smooth surface straight from the injection molding machine.
  • Package included : 1 x Matte Black Inner fairing,1x Vivid Black Outer fairing(Non-Detachable style),2 x Unpainted White Speaker Enclosure Covers.
  • Easy to install and no install instructions,Mounting hardware are not include.Pre-made threaded holes for easy to attach the inner fairing.
  • With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence.
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock