Best Thin Plywood

CMT P06036 ITK PLUS Saw Blade for Finishing, 6-1/2 X 36 Teeth, 10° ATB + Shear Angle, 5/8-Inch 003c003e Bore

For smooth finish crosscuts. Faster cuts thank to the special ground teeth..
Cuts lumber, plywood, OSB sheets. To be used on portable and cordless circular saws..
0.069 kerf thickness, 0.039 plate thickness, 20° hook angle..
Super thin-kerf and Industrial SinterHip Hi-Density Carbide for long-lasting cutting performance..
Non-stick orange shield coating and shear angle grind..

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance..
Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood..
0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind..
Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..

Hollow-door anchor provides a firm hold from within hollow-core doors and thin panels 1/8" to 1/4" thick.
Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
Made in USA, and works with #8 to #12 sized screws (sold separately).
Ultimate tensile strength is 124 lb. in 1/4" plywood with a #8 x 1-1/4" screw.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

For framing/decking & general construction. Faster cuts thanks to the special teeth geometry..
For cutting lumber, plywood and OBS sheets. To be used on portable and cordless circular saws..
0.069 kerf thickness, 0.043 plate thickness, 20° hook angle, 10° ATB+Shear grind..
Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..

Plywood Sheet: Create one of a kind DIY projects, props, and models thanks to this set of 12x12 wood board sheets.
Multi-Purpose: Use the plywood board for laser cutting, woodwork, engraving and painting to make artwork, school projects, wooden toys, model boats, signs, and bird houses.
High Quality: These hobby board sheets are made of quality birch plywood.
Dimensions: Each wood panel sheet measures approximately 12 x 12 inches with a 0.12-inch thickness.
What’s Included: Includes 8 plywood sheets.

SUSTAINABLE AND HANDCRAFTED IN THE USA: Each package includes 5 large, beautiful nail-up metal ceiling tiles made from 25% recycled T1-grade tin-plated steel.
EASY TO INSTALL: Panels contains a 1/4” nail rail that overlaps with other tiles to form a tight and nearly invisible seam.
PERFECT SIZE FOR ALL PROJECTS: Each tile measures 24 inches x 24 inches are are .01 inches thin. Perfect for kitchens, bars, restaurants, ceilings and much more! Covers 20 SQ FT.
DECORATIVE AND FUNCTIONAL: Pattern #3 From American Tin Ceilings Features a Small Repeating Floral Arching Diamonds Pattern.
IMPORTANT INSTALLATION DETAILS: Tiles are FINISHED and do not require an additional polyurethane clear coat. Ceiling installation requires a wood substrate such as plywood, furring strips, or joists. Backsplash installation requires adhesive..

If you are looking for plywood Squares in various sizes and thicknesses, we have them for you. Each wood square is cut from high quality Baltic Birch Plywood in either 1/8" or 1/4" thickness. We use plywood because of the dimensional stability, ease of painting or staining and overall strength..
When we cut with a laser, you will end up with a light smoky residue on the surface of the wood. To remove, you simply need to sand the product with a light duty sandpaper (we use 150 grit) or you can simply paint the wood with a high quality craft paint. The plywood that we cut with is not rated for exterior use. Proudly made in the USA!.

Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood.
Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance.
Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a serrated flange for additional grip on the mating surface that resists loosening.
Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver.

Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood.
Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity.
Pan head has a flat top and short vertical sides with a rounded top edge.
Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

WOOD MATERIAL - Made of wood with a smooth satin finish, reinforcing your existing pet gates. Plywood is wood that consists of thin layers of wood....
FIT 0.75" THICK GATE - There is a slot, about 0.75 inches, in the middle of the item. The rubber pads which besides the slot increase adsorption and....
EASY TO USE - Simply slide feet down over the bottom frame of your gate or extension. Add a pair of these sturdy support feet to provide extra....
NON-SLIP PADS - Rubber pads on the bottom prevent sliding and keeps floors safe from scratching. Rubber pads beside the slot have contributed to....
NOTE - Package includes a pair of support feet. There is no way to adjust the size of the slot, the support feet only fit for the gate with 0.75"....