Motorized Ball Valve- 1 Stainless Steel Electrical Ball Valve with Full Port 9-24V DC and 5 Wire Setup can be used with Indicator Lights [Indicate Open or Closed Position] by U.S Solid
SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
NPT THREADING-1" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
9V-24V DC- Works effectively over entire voltage range.
Limit switch minimizes power after valve is fully....
5 WIRE INDICATOR LIGHTS SETUP- 5 Wire setup allows for easy operation and indicators for when the valve is fully open or fully closed.
ALTERNATIVE TO SOLENOID VALVES- Automatically reduces power once fully open or fully closed.
This reduces likelihood of overheating, making it a great....
IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot
S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter
Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention
【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank
Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should be available for you to install if water inlet is large, effectively solve the problem of taking water in a short time..
Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer
Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs
High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Float Valve for Water Tank Stainless Steel Float Ball Valve 3/4 Inch DN20 Floating Ball Valve Switch Automatic Brass Toilet Valve Float Valves for Stock Tank Pool Water Level Control (2)
Work Well: the metal float valve consists mainly of a curved arm and floating ball, well made and useful, nice for cutting, distributing and changing the direction of medium flow, and you can use it to control the level of water in a water tower or pool.
Long Service Life: this floating ball valve is made of brass and stainless steel, sturdy and solid, reliable and serviceable to use, not easy to break, deform or bend, with nice corrosion resistance, able to be applied for a long time.
Where to Apply: these float water valve have a wide range of applications, practical to use, suitable for water tanks, water towers, boiler machines, rice steamers, water pumps and other places you want.
Well Sealed: the water tank float switch features a rubber seal, with nice flexibility, not easy to tear or wear, high temperature resistant, playing a fine sealing role.
Meanwhile, its float rod can be adjusted, simple to use.
Enough to Use: this package provides you with 6 pieces of float ball valves, whose model is DN20, thread is about 3/ 4 inch, applicable medium is water, able to withstand temperature of 0-50 degrees, sensitive and flexible, enough for you to use and replace.
Valves constructed of lead free dezincification resistant (dzr) brass for superior reliability and strength.
3/4-inch male hose thread outlet connections.
Box design allows for right or left stud mounting.
Snap in place faceplate allows for up to 3/4-inch drywall.
Push-to-connect design allows for a simple and fast installation on any combination of Copper, pex, CPVC or pe-rt pipe.
The product has multiply configurations as the valves are removable and can be placed in the different holes around the box(Design/ configuration may vary).
GIYO Mini Bike Pump, Portable Compact Bicycle Pump with Pressure Gauge, Tire Repair Kit, Perfect for Presta & Schrader Frame Mount for Road, Mountain & BMX Cycling, Ball Pump with Needle 120 PSI
[Clever Valve System]: The handhold bicycle pump combines with automatically compatible valve fit for Scharder and Presta valves. No changing valves needed, tight with Scharder and Presta valves without air leak..
[Carry-easily]: Lightweight and Durable handy cycling pump is equipped with mounting bracket which can attach tire pump to your bike frame, using hook and loop strap and fixing screws securely hold the pump in place..
[High Pressure PSI]: The maximum volume of the hand-operate bicycle pump is 120PSI, which can be used to inflate the bicycle tires and maintain the tire pressure. PSI value can be checked by pressure gauge during the inflation process..
[Multiple Functions]: This air inflation pump is suitable for Mountain , Road , BMX , MTB bike , Stroller , Electric bicycle , Kids bike. Comes with ball needle inflate that also fit for Football , Basketball , Volleyball , Soccer ball and other balls..
[Repair kits]: Tire repair tools included with 1 piece mini bike pump, grinding tablet, ball inflate needle, velcro strap, mounting bracket, 2 pieces of fixing screws and mini pry bars, 6 pieces of tire patches..
