New Brothread 60 Spools Wooden Thread Rack/Thread Holder Organizer with Hanging Hooks for Embroidery Quilting and Sewing Threads
√ Make your embroidery and quilting easier: The center distance of two spindles is 1.7 inch, the height of each spindle is 1.4 inch, which is designed for holding 60 mini king spools & cones【NOT suitable for large spools!!!】. It is a great helper to nicely organize your thread spools and make your sewing room or sewing desk to be clean and well organized. Displaying all the color assortment of your threads, you can easily see and reach each spool when making your embroidery and quilting project..
√ Can be free standing or mounted on the wall: This wooden thread rack is designed with two folded legs. You can easily pull the legs out and let it stand freely on your table or fold the legs back for easy storage. In order to saving space, we have designed two hooks on back of the rack, you can hang this thread rack on the wall 【Note: Nails on the wall and other tools are not provided!!!】..
√ Widely used for most mini king spools and cones: This thread rack is perfectly suitable for all the New brothread’s 500m and 1000m spool threads and other thread sellers on Amazon, only when the max base size of the spool is larger than 1.70 inch, such as 1000m spools of Floriani, Isacord, Robison-Anton, you need put 2-3 spools upside down each row on th....
Natruss Thread Repair Kit 20 Pcs M8x1 Stainless Steel Rethreading Tap Set for Female Thread Repairing Insert Sleeve
【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
20Pcs Thread Inserts Protector,Male Female Reducing Nut Repairing Tools with Steel Wire for Improve Thread Strength,M12 x 1.75(2D)
【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes
[Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
[Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
[Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
[Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
Inserts are heat-treated for long-lasting strength.
[Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
7.9mm(Max.), suitable drill bit diameter is 6.3mm..
Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Embroidex Free Standing with Legs & Wall Mountable 60 Spool Thread & Cone Stand/Rack for Sewing & Embroidery Machine
PROFESSIONAL THREAD ORGANIZER – An unorganised sewing thread stash could pretty quickly become a mess and might make finding the right spool or....
EASY TO STACK – This is definitely the thread organizer rack you need to have in your craft space. The rack can hold upto 60 spools and that too of....
DURABLE AND HIGH QUALITY - Our thread organizer rack is unique and is made up of superior quality Plastic which makes it sturdy and durable. The rack....
Bonost 500Pcs Threaded Inserts Kit M2 M3 M4 M5 - Female Thread Heat Set Insert Brass Knurled Thread Insert Nuts for Plastic Injection Molding 3D Printing Metric
【Designed for Injection Molding】: With deep & clear knurls, the threaded inserts will add enough strength to screw connections when inserted into plastic components. The softened plastic will flow into the knurl pattern and then harden to form a firm bond with the insert..
【High-quality Material】: Made of premium brass material, our threaded insert for plastic has both aesthetics and high strength, which can be used for a long time. And the high thermal conductivity of brass thread inserts means faster heating and insertion into plastic parts..
【How to Use】: Female thread knurled insert nuts are suitable for mounting into tapered holes by heating or for molding during injection molding. You can use a soldering iron to heat it up and then pressing it into the hole. It is easy to control and at a low cost..
【Professional Insert Nuts Kit】: Various metric thread sizes available, including M2, M3, M4, and M5. Widely applied in laptop plastic housings, 3D printers, automotive, electrical injection molding, and more. And the every type of heat set inserts has an individual bag to prevent them from mixing in transit..
【What You Get】: 500 pcs threaded inserts assortment kit, and customer friendly service. There are 15 different sizes to s....
E-Z LOK - 653-6 E-Z Lok Externally Threaded Insert 303 Stainless Steel/Metric M6-1.0 Internal Threads 3/8 -16 External Threads 10.31mm Length Made in US Pack of 5
THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 303 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, #10-32 Internal Threads, 5/16\-18 External Threads, 0.315\ Length, Made in US (Pack of 10)
THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
