Best Thread Valve

Mastercool 58531 Black R134A Standard and JRA Valve Core Remover

  • Designed for use of servicing valve cores in R134a systems.
  • Valve core remover/installer for standard and JRA valve cores.
  • Access and change valve cores while the A/C system is still filled with refrigerant.
  • Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no....
Check Stock

HQMPC Heavy Duty Brass Shut Off Valve Garden Hose On Off Valve Brass Water Hose Valve Hose On/Off Valve Garden Hose Connector (2PCS) +4 Extra Pressure Washers

  • Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage.
  • The package include 2pcs brass garden hose shut off valve,4pcs pressure washers.
  • The garden hose connector size thread standards: 3/4" GHT thread easy to turn on and off.
  • Attention: We remind on our packing of the shut off valves contain Pb. In fact, All Brass contain Pb more or less. If you mind Pb, please buy other material..
  • Brass shut off valve for garden hose, we provide 3 years gurantee. Just order them with your prime. If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you.
Check Stock

MENSI Outdoor Propane Gas Patio Heater Replacement Parts Safety Thermocouple Sensor

  • Propane gas patio heater dump switch type thermocouple end nuts for valve M8*1.
  • Two terminals connect dump switch on the patio heaters.
  • Thermocouple tip thread M6x0.75 universal type (Can adjust height easily by nuts).
  • Easy install - Head for heating around burner and thread nuts for valve other two terminals for dump switch.
  • The thermocouple can connect a thermostat as well. Keep the head to be heated always or it may stopped gas.
Check Stock

Milton (S-684-4) 1/4' MNPT Male Tank Valve

  • INCLUDES: Standard valve core and plastic cap. Overall length (with cap): 1.5 inch..
  • DESIGNED: For use with air compressor tanks to fill vessels with air..
  • IDEAL: Tank valve prevents air from leaking out while allowing for air to pass through for inflation..
  • NPT: 1/4" Male national pipe thread. Cap thread size: .305-32..
  • MAXIMUM AIR PRESSURE: 200 pounds per square inch (PSI)..
  • Milton is your number 1 source for Quality Air Accessories.
  • Since 1943 Milton has been producing Quality Air Accessories.
  • Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets.
Check Stock

Metal Bidet T Adapter with Filter Screen 7/8 T Valve for Toilet Tee Connector with Shut Off Valve Brass Chrome Finish 1/2 or 3/8 Bidet Hose 3 Way Diverter

  • ❶ 7/8 bidet adapter valve made of brass (Chrome Finish) , compression resistance , explosion proof ,Cone washer helps make installation smooth and leak-proof.
  • ❷ [ Extended Bidet and Toilet fill Valve Service Life ] Includes 7/8 toilet screen filter t adapter to bidet , toilet filter screen adapter captures sand , dust , rust or other sediment particles , prevent particles from damaging supply valve or bidet , Extend the use time of bidet and toilet filling valve.
  • ❸ [ Size ]This metal bidet valve adapter 7/8 is connected to toilet tank and toilet connector hose,1/2 or 3/8 thread (Thread OD or ID Please refer to the size of image 3 ) connects to bidet hose.
  • ❹ [ Safety Smooth and Reliable Operation ] Used to shut off water flow when not in use and adjust water dischayge to suit your needs , there is no need to worry about affecting the water flow of the toilet after installing the bidet adapter valve , Ideal for households with children ( bidet can be"locked" so it cannot be turned on by accident).
  • ❺ [ Strict Testing ] If you see sand, dirt, rust or other sediment particles collecting in the bottom of your tank or bidet , then this toilet bidet adapter with toilet filter screen is the solution.
Check Stock

Float Ball Valve, 1/2 Inch Supply Tube Male Automatic Fill Feed Humidifier Tank Water with Adjustable Arm for Ponds, Livestock Water Trough, Aquariums, Aquaculture, Hydroponics and Reservoir (2 Pack)

  • Package includes: 2 packs tank float valves, spend less time filling and checking the water tank to protect the plants from drying.
  • No power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening.
  • Material: the mini float valve is durable with adjustable arms, made of hard ABS, will not corrode or rust.
  • Size: the floating valve has a 1/2 NPT pipe thread.
  • This is very common in the pipeline world, the thread size is approx. 3/4 inch with standard gaskets to eliminate leakage.
  • Applicable environment: the water trough float valve is suitable for ponds, chickens, livestock sinks, aquariums, Aquaponics, aquaculture, hydroponic tank reservoirs.
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
  • 6 ★ Package Included:Inlet 3/8" OD female compression x 3/8" OD compression x 3/8" OD compression angle stop Add-A-Tee valve x 1 , 3/8" OD female compression thread to 1/2 NPT adapter x 1.
  • 7 ★ T-valve : The 3/8 t adapter has 3 outlets, which can be used as one water inlet, two water outlets, providing new outlets for bidets, faucets, dishwasher.
Check Stock

Attwood 88FAS014-6 Fuel Tank Fitting — Male Thread, Anti-Siphon Valve, ¼-in. NPT x 3/8-In. Barb, Aluminum

  • Dependable replacement for original equipment.
  • For use with Universal brand engines and tanks.
Check Stock

Kitchen Faucet Head Replacement, Kitchen Sink Faucet Replacement Parts, Kitchen Faucet Sprayer Nozzle, Splash-proof Spayer Head, Pull-out Sprayer Head, 3-Function, Brushed Nickel, PAKING PB3001

  • THREE-FUNCTION SPRAYER HEAD: 1.Stream Flow rate: 1.8 GPM.
  • 3. Sweep Spray.  The splash-proof spray design is the biggest feature of the nozzle, which is so soft and delicate that it produces little splashes to the kitchen sink..
  • NON-RETURN VALVE DESIGN: Built-in non-return valve works to prevent water backflow. It immediately shuts off the water when the kitchen faucet is switched off, with no more dripping..
  • FILTER FILTERING IMPURITIES: The filters works to regulate water flow rates & filter impurities, proving you&your family with clean, freshed and healithy water..
  • SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options. Please confirm the thread size before ordering..
  • DIMENSION: Overall Width: 6.69 '' Thread Height: 0.5 '' Overall Height Exclusive the Thread: 3.93'' Connection attached to the hose: G1/2 male thread size..
Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock