Brass Flat Washer - 7/16\ (.500 ID x 1.125 OD x .081 Thick) Qty-1,000
A flat washer is a round outer diameter thin ring with a center hole (inner diameter) punched to a size just larger than a bolt or screw. Flat washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. While there are many types of flat washers standard are the most commonly used..
Brass flat washers are made of Dezincification resistant (DZR or DR) brass.
Normal brass flat washers do not meet this standard and have high corrosion risk.
Brass flat washers are suitable for high water temperatures, deviating water qualities (soft water) or where chloride is present.
StartFine Fiberglass Fish Tape Cable Rods Fish Stick Wire Running Fish Tape Kit Connectable Cable Puller Pull Push Electrical Wire Rods with Hook and Eye Noodler
** [Material]: The Fiberglass rods are made of high quality non-conductive sturdy fiberglass with solid brass connectors & eye/hook ends, and a bendable BRASS Spring. White rods are highly visible, Sturdy and durable, brass terminal, spring and hook accessory will never rust. The fiberglass is hard, DO NOT bend by force while using..
**[Fish Tape SPECS]: Fiberglass Rod diameter is 3/16". 17 inch*10 rods = 14ft. Total 10 pcs, 17”/pc. The Fiberglas fish tape can be extended up to 17' by combining with brass connectors..
**[DESIGN]: Highly visible white rods simply screw together with special threaded ends extending the tool up to 14 Ft. with an high qualified brass spring that flexes to any angle and a hook and eye attachment making pulling and pushing cables a breeze..
*[Fish Tape Fastener]: Easy to use through corner and the wire knot will not lock in corner. Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
**[Packing Tube]: The Fiberglas Fish Tape Cable Rods Come with plastic storage case, easy to carry and store, PC tube is solid and sturdy..
33 Feet Wire Fish Tape Fiberglass Running Fishing Cable Coaxial Electrical Wire Puller Glow Rods Connectable Pull Push Cable Pulling Kit With Hook And Hole Kit In Transparent Tube, Green
Wide Usage Fishing Tape Wire Puller: For running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, great insulating property, low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
Fiberglass Rods Package Include: Made of fiberglass material, includes 10 rods (3/16" diameter) with red fastener, brass pusher, rope chain, eyelet ring head, eyelet ring, brass hook, brass push head, magnet search head. A complete fishing wire tool for pulling wire in different situations.
Excellent Extensibility Fishing Cable: Rods can be used individually or threaded together for desired length, can be extended up to 33 feet.
Convenient To Store The Fiberglass Wire Running Kit: Bright green rods are highly visible and comes with plastic storage case, very convenient to store.
More Advantages Wire Puller Tool: The wire fisher set is Strong flexibility and will not break when folded (But do not bend too forcibly while using!). Attached fish tape fastener can prevent casing wear and reduce wire wear, fish ball chain helps fish wires to operate the wiring through interior hollow & narrow & unclear walls with ease, flexible copper leader makes pulling or pushing flat steel tapes easier.
USA Made Product Available in 8 oz Brush-Top container.
Designed specifically for marine applications, Solution 2400 protects fasteners and assemblies from rust, corrosion and wear caused by fresh and salt water via direct contact and humidity. Excellent water resistance and water wash-out resistance and temperature resistant to 2400ºF. Perfect addition to stainless steel fasteners as it eases assembly and disassembly of fastener applications..
A simple application of the paste with the included brush to any bolt prevents metal on metal contact which eliminates the problem of galling/seizing, or, "locking up" sometimes experienced with stainless steel..
Manufacturer Recommended Uses: Threaded Connections Metal Fittings, Pumps, Seals, Valves Winches, Engines and Steam Traps Ship Yard Maintenance, Marinas Waste and Water Treatment Plants.
This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring.
For repairs on bent struts, strut tubes, and damaged pieces.
Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut.
threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
The 8MILELAKE Macpherson Strut Spring Compressor constructed with forged hooks and center screw hardened for maximum strength and longevity.
A plastic carry case is included. easy to organize and carry the tool.
Keadic 120 Pcs M4x8mmx6mm Thread Brass Knurled Nuts Set, Female Threaded Insert Embedment Nuts, Threaded Knurled Heat Set for Printing 3D Printer and More Projects
【What you Get】Each package contain 120 pcs M4*8mm*6mm brass threaded nuts, In addition, offer reliable after-sale service for you.
Pls feel free contact me for any dissatisfaction, we will deal with the issue within 12 hours until your are satisfied..
【Premium Brass Material】 Made of premium brass material, with high strength and hardness, strong heat tolerance, Oxidation resistance and strong corrosion resistance.
The force is evenly tightened. Compared with aluminum and copper, the brass is harder and more durable, which provides longer service life for you..
【Excellent Workmanship】Our knurled thread nut has high-precision and deep thread that is compatible with the corresponding screw, avoiding to slip. Smooth surface without any burr, standard circular, firm and uniform, easy to install..
【Easy to Use】These threaded insert nuts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Since the insert has a guide, there is no need for a counterbore or countersink..
【Practical Fastener& Wide Application】Perfect for the injection moulding for tightly fixing, heat into thread tapered hole and ultrasonic installation.
Widely applied in laptop plastic housings, 3D printers, automotive,electrical in....
Little Giant 566729 7365 GPH Wet Rotor Pump with 40-Ft. Cord for ponds up to 7300 Gallons, Black, F70-7300
APPLICATIONS: wet rotor pump construction without mechanical seal or oil is ideal for ponds up to 2700 gallons.
2 PRE-SCREENS INCLUDED: removable fastener holds screen in place, modular design allows for single or multiple pre-screens.
VERSATILE: can be positioned vertically or horizontally.
accepts 2-inch threaded fitting or rubber coupling.
SAFE FOR FISH: oil-free design for maximum safety for all pond life.
SPECIFICATIONS: 5.5 Amps, 660 Watts, 40-ft. cord, 2-inch MNPT and SPIG discharge and inlet, maximum 7365 GPH at 0', 28-ft. shut-off, comes with rope/cable loop.
Little Giant F50-5000 5020 GPH Wet Rotor Pump with 20-Ft. Cord for ponds up to 5000 Gallons, Black, 566728
APPLICATIONS: wet rotor pump construction without mechanical seal or oil is ideal for ponds up to 5000 gallons.
2 PRE-SCREENS INCLUDED: removable fastener holds screen in place, modular design allows for single or multiple pre-screens.
VERSATILE: can be positioned vertically or horizontally.
accepts 2-inch threaded fitting or rubber coupling.
SAFE FOR FISH: oil-free design for maximum safety for all pond life.
SPECIFICATIONS: 3.6 Amps, 413 Watts, 20-ft. cord, 2-inch MNPT and SPIG discharge and inlet, maximum 5020 GPH at 0', 28.5-ft. shut-off, comes with rope/cable loop.
J-B Weld 24236 Perma-Lock Medium Strength Threadlocker - Blue - 36 ml
PERMALOCK: Provides a superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening from shock and vibration.
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project.
EASY TO USE: Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools. Perfect for 1/4- 1" fasteners. Cap will not drip, spill or clog.
DEPENDABLE & VERSATILE: Perfect for use on rocker arms, stud bolts, frame bolts, fasteners and bushings, loose screws and any other vibration sensitive item.
DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.