40Pcs Anwenk 1/4"-20 x 20mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment (with Hex Spanner)
Material: High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design..
Applications:These furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations..
40pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture.1/4″-20x20mm screw type. Comes with 6mm Hex Spanner..
Usage: Pre-drill /drill a well-sized hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 23mm), then use a proper 6mm internal hex tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole..
Metal Threaded Star Type Insert for 1 OD Round or Square Tubing - Threaded Star Tube Insert - Round or Square Tubing Insert 1/4-20 Threads - Threaded Tubing Inserts Threaded Tube Inserts 16
16 Pack Threaded Star Type Round or Square Tubing Insert 1/4-20 Threads.
Round or Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
Metal Threaded Star Type Insert - Metal star type inserts are designed to insert inside steel tubular legs.
Round or Square Tubing Threaded Insert - Our metal tube connectors are designed to grip the inside of tubing and prevents the insert from slipping out....
Threaded Inserts for Round or Square Tube - These versatile products are commonly used in ductwork supports, rack units, RV ladders, and cross member....
E-Z Lok Externally Threaded Insert 303 Stainless Steel 3/8 -16 Internal Threads 9/16 -12 External Threads 0.515 Length Made in US
THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
INSTALL WITH STANDARD TOOLS – 316 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK
Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
SG TZH 173Pcs Threaded Inserts for Wood Nutsert Screw 1/4-20 x 10mm/15mm/20mm/25mm Hex Drive Furniture Wood Nuts Assortment Set (with Hex Spanner-Bronze)
1/4" -20x25mm 25 pieces, inserting head ⌀: 0.46 inches, body ⌀: 0.32 inches, thread ⌀: 0.41 inches, inserting head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, thread ⌀: 0.413" / 10.5mm..
FIRST-CLASS QUALITY AND EXQUISITE CRAFTSMANSHIP - This threaded inserts for wood are made of high-quality carbon steel, the surface is plated with yellow zinc, has excellent hardness and wear resistance, is not easy to rust and oxidize, and the standard hex socket head is smooth, with flanged thread texture, more stable and non-slip..
EASY TO USE AND INSTALL - Our threaded inserts are easy to use, just drill a hole of appropriate size at the place of use, and then use a hexagonal wrench or other optional drive tools to install (Tips: recommended hole diameter 9.6 +/- 0.2mm, if high-hardness wood, please enlarge the hole).
WIDE RANGE OF APPLICATIONS - The 1/4"-20 threaded insert kit meets your needs and are perfect for all kinds of furniture. In Soft wood, recommended drill bits for this threaded inserts are 8.5mm, 9mm. In Hard wood such as white oak or maple, recommended drill bits are 9mm, 3/8 inch or 9.5mm, increase your productivity and become your good helper..
100% cotton 3” patches, .40 caliber mop, square patches, long slotted tip and two rods.
8” aircraft grade Memory-Flex cables with large slotted tip for proper Breech-to-Muzzle cleaning.
Multi-purpose tool functions as a t-handle, rod handle (attach a rod to the 8-32 threaded insert) and bit driver (insert selected bit into bit holder). Four bits included: 5/32” hex, T20 hex, Phillips #0, Phillips #2.
