Best Threaded Pipe Fitting

1-1/2" 5-way Cross PVC Fitting Connector

  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Check Stock

Dixon FAB250N Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2-1/2 NST Female x 2-1/2 Hose ID Barbed

  • Coupling for connecting a hose to a pipe or fitting.
  • Hose barb on one end and female NST threads on the other.
  • Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
  • Nut for tightening threaded fitting with a wrench.
Check Stock

Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting

  • Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
  • Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
  • Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
  • Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
  • Bulkhead OD 25mm, suitable for about 25mm ID hole..
Check Stock

Alffun 3/4 Inch Black Malleable Iron Cast Pipe Fitting Flange Tees Elbow, for DIY Decor or Industrial Vintage Style, 30-Pack.

  • 30 Pack 3/4 Inch Flange Tees Elbow Pipe Fitting: adopts strict production standards, anti-corrosion, anti-high pressure, durable. Solid design and good toughness, which help to complete some very unique DIY pieces..
  • Compatible with standard 3/4 inch pipes nipples and fittings, with convenient threaded nipples. Simply screw them together and they will hold forever, can easily to build any shape of frame and shelf for a DIY furniture as you like..
  • an Authentic Malleable Iron, gives you the exact retro industrial look you've been searching for. you can clean them up with lacquer thinner. and spray paint rust inhibitor..
  • Much cheaper and better quality than parts found in hardware stores. Order them here to get exactly what you want with excellent savings..
  • Many customers love this set so much. fantastic product and outstanding value for the money. These pipe fitting make an excellent gift..
Check Stock

Thread Reducer Bushing 2" Male x 1-1/2" Female Adapter Pipe Fitting with Stainless Steel 304 NPT

  • Maximum working pressure of 150 psi at 70 degrees F.
  • NPT thread for creating tighter seals than straight threads.
  • Shape:Reducer Bushing(Male x Female),Connection:NPT-NPT,Measurement:2"x1-1/2".
  • This adapter fitting connects pipes or fittings with different end types, diameters, or materials.
  • It has male NPT threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting..
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...s durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right..
Check Stock

Brooklyn Pipe 1/2\ Inch Elbow Tee Combo Pack (10 Elbows, 10 Tees) Threaded Pipe, 90 Degree Pipe Elbow Tee | Decorative Iron Piping, Metal Cast Pipe Fittings For DIY Furniture Projects

  • 1/2" INCH ELBOW TEE COMBO PACK - Our Brooklyn Pipe malleable iron threaded elbow / tee combo pack provides you with great pipe fittings at a very affordable price.
  • PERFECT FOR DIY - Whether you're looking to build a pipe shelf, pipe towel rack, pipe lamp, our 1/2 value pack of tees and elbows is up to the task. These fittings are for decor and DIY projects only..
  • RAW IRON - Malleable iron is raw, unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron it's normal for your hands to get dirty. You've probably seen iron workers in movies, they don't come home clean!.
  • QUALITY CONTROL - We inspect and pack each pipe fitting we sell. If it doesn't look right, feel right or if there are any issues, we return them to our supplier. We offer a LIFETIME warranty on our products, just give us a call or send an e-mail..
  • SUPPORT USA BUSINESSES - Brooklyn Pipe is a family owned business in the USA. We are available via e-mail or our cell phone to help answer any questions you have. Please help support small American businesses!.
Check Stock

Brooklyn Pipe 3/4 Inch Elbow Tee Combo Pack (10 Elbows, 10 Tees) Threaded Pipe, 90 Degree Pipe Elbow Tee Decorative Iron Piping, Metal Cast Pipe Fittings For DIY Furniture Projects

  • 3/4" INCH ELBOW TEE COMBO PACK - Our Brooklyn Pipe malleable iron threaded elbow / tee combo pack provides you with great pipe fittings at a very affordable price.
  • PERFECT FOR DIY - Whether you're looking to build a pipe shelf, pipe towel rack, pipe lamp, our 3/4 value pack of tees and elbows is up to the task. These fittings are for decor and DIY projects only..
  • RAW IRON - Malleable iron is raw, unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron it's normal for your hands to get dirty. You've probably seen iron workers in movies, they don't come home clean!.
  • QUALITY CONTROL - We inspect and pack each pipe fitting we sell. If it doesn't look right, feel right or if there are any issues, we return them to our supplier. We offer a LIFETIME warranty on our products, just give us a call or send an e-mail..
  • SUPPORT USA BUSINESSES - Brooklyn Pipe is a family owned business in the USA. We are available via e-mail or our cell phone to help answer any questions you have. Please help support small American businesses!.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock