Best Three Phase Ac Motor

Phase Sequence Meter, 20 Hz ~ 400 Hz Compact Handheld Three Phase Sequence Rotation Meter, No Battery Needed, for General Measuring Tool

  • Wide range of uses: 100% brand new high quality digital phase indicator. An indicator with two functions to check the phase sequence and indicate whether the phase is disconnected..
  • Easy to use: This indicator can check three-phase AC voltage from 200V to 480V, with excellent performance. The LED light can show whether the phase is disconnected and supports buzzer indication..
  • Easy to carry: small size, light weight, convenient to carry, simple operation, safe and reliable to use. Small and light, with a bag for you to take with you..
  • High-quality materials: Made of high-quality plastic, it has excellent insulation, heat resistance, and is not easily damaged by collision. High-quality products provide you with a high-quality guarantee..
  • Professional manufacturing: factory unified standards, excellent, professional manufacturing, CNC edge processing and cutting, long service life, all components meet strict production requirements. You can add it to the shopping cart immediately and enjoy this home digital display test pen quickly..
Check Stock

Grizzly Industrial G1030Z2P - 3 HP Dust Collector with Aluminum Impeller

  • Motor: 3HP, 240V, single-phase, 3450 RPM.
  • 7" inlet has removable "Y" fitting with three 4" openings.
Check Stock

Brushless DC Motor 3000W 72V Electric Motor High Power Brushless Motor Controller 50A Scooter Motor Go Kart Electric Motor Kit

  • Brushless DC Motor 3000 watt powerful motor, The motor adopts all-copper lugs, high-quality magnets and rotors, low-noise operation and long service time.
  • 3000W 72V Electric Motor, 4hp high power and high speed, 4900rpm/min rate speed, 6700rpm/min max speed, 45 amp rate current , 5.4N.m. of torque and 100-150kg ( 220 - 330lb ) maximum load.
  • Brushless Motor Controller 50A, 48-72 volt, 3000 watt, 120°phase degree.
  • Multifunctional intelligent controller Low-level brake, 3 Speed, Reverse, Brake Light, Indicator Light, Battery Charge and Ignition Lock.
  • Three-speed Throttle: three speeds can be adjusted, low speed 50%, medium speed 75%, high speed 100% and also has a reverse switch, Cable length is about 150cm ( 59 inches ).
  • Package Include: 72V 3000W Motor*1pc, BLDC Controller 50A*1pc, 3 speed throttle*1pc, Ignition Lock*1pc, T8F Sproket*1pc, T8F Chain*1pc, Manual*1pc (without battery)..
Check Stock

Pump, Grinder, 2 HP, 15a

  • ...r: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
  • GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
  • GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
  • Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM of Wate....
Check Stock

Glarks 30Pcs 5A 10A 15A 20A 30A Circuit Breakers Thermal Overload Protector Switch with Manual Reset 32VDC, AC125-250V With Quick Connect Female Spade Terminal and Waterproof Button Caps

  • ...odification. Please test before installation..
  • ♛ [Safety Protection]: Push-to-reset operation with black manual reset button, come with a waterproof button cap to protect from bad weather. It can provide effective protection for the electrical system, squirrel cage motor, winding motor over current, short circuit, phase loss, phase imbalance, phase error and starting process..
  • ♛ [Widely Application]: Overload protectors are widely used in the protection and monitoring of industrial electrical appliances in the machinery, metallurgy, building materials, chemical, and textile industries..
Check Stock

Y&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel

  • ...VC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments(Support single-phase or three-phase connection).
  • We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed).
  • Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.(Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters.
  • Grid Tie Solar Inverter suitable for 4X250W-300W 36V solar panel (Vmp30-39V.
  • Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W.
Check Stock

Coleman 48204C866 Mach 15+ A/C Unit

  • Electrical Rating: 115V AC, 60HZ, 1 Phase.
  • Exterior Shroud Dimensions: 13.8" H x 26.1" W x 38" L.
Check Stock

TPI Corporation U24-TE Industrial Workstation Fan, Mountable, Single Phase, 24' Diameter, 120 Volt

  • Swivel-mount 3-speed workstation fan for precise direction of air flow.
  • 2.4 amp, 120 volt, single phase, 1/8 horsepower, permanently lubricated, totally closed sleeve bearing motor.
  • 360 degree vertical and horizontal swivel.
  • Three aluminum paddle blades attached to a steel hub and spider assembly for durability.
  • 10 foot SJT type three-conductor cord with a three-prong plug for connecting to grounded electric outlets.
Check Stock

Forward Reverse Switch, 240v/480v/600v 40a Tire Changer Machine Motor Forward Reverse Switch Heavy Duty for t2m20508-0567 Tire Changer Switch Coats 5045 Tire Machine Switch

  • Plastic and metal material:The Motor Forward Reverse Switch is made of plastic and metal,the switch is very durable in using,not easy to aging and abrasion resistant,to ensure maximum strength and durability for long lasting usage.Good quality can provide a Securer guarantee for your life. for t2m20508-0567 tire changer switch.
  • Universal Fitment:The Tire Changer Machine Motor Switch is perfect suitable for a voltage of 220V single-phase and three-phase 380V,can use in many tire changers.Great for your broken or damaged one. for coats 5045 tire machine switch.
  • Easy to Install: Our Machine Motor Switch can be directly install in the tire changer and control the machine motor.Simplify installation steps,no modification,cutting,or drilling required. for forward reverse switch for atlas tc289 tire changer.
  • Excellent Appearance: Our reverse motor switch can be used for tire changer foot pedal.Manual operation without automatic reset,and without spring.Professional manufacturing,high characteristic and stable performance. for ranger tire machine parts.
  • Quality Assurance:This product meets the standard specifications, strictly follows the factory quality control, is durable and is a high-quality after-sales replacement accessory. for drum switch tyre changer cap.
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock