WAudio AC Noise Power Conditioner - Mains Purifier Audio Video Noise Filter Surge Protector with US Standard Sockets (Silver)
【HEAVY DUTY DESIGN】- Metal casin with thickness aluminum plates, come with 8pcs filtered outlets and 4pcs direct (non-filtered) outlets..
【OVERLOAD PROTECTION】- The sockets will be powered off when total current over 15A, press RESET button to restore power supply..
【PHASE DETECT】- Phase and the ground wire connection of AC source can be detected automatically. The indicator will be light when the phase is correct..
【VOLTAGE PROTECTION】- Its circuit detects dangerous voltage irregularities and provides the highest level of surge & spike protection. The voltage meter on the front panel helps you know whether the power voltage in the wall socket is stable..
【POWER CLEAN】- It ensures that all devices connected to W-5900 receive clean & filtered power, which reduces noise and ensures better sound and picture quality from amplifier, DJ equipment, home recording, projector, TV, computer, and other electronics..
ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
EMF Outfitters - Smart Meter Shield with Patent Pending Magnet Holders, Faraday Cage for Smart Meter, Smart Meter Cover RF Radiation Shield, 5G Protection, EMF Cover Mesh Smart Meter Protection
...(radio frequency) radiation. This high-grade stainless-steel hat is not only corrosion-resistant but also highly conductive making it the perfect radiation blocker at homes, offices, schools and other places with EMF radiation incidence..
Effective Anti-Radiation Fabric - Most homes and offices use a smart meter, an electronic device that records electrical consumption. The device then transmits this data to the electrical supplier for billing. Smart meter transmittal gives off radio frequencies (RFs) which can be harmful to health. The cover blocks off up to 98% of the radiation emitted by this electronic device..
Easy Installation With Patent Pending Magnetic Holders - The EMF DEFENDER smart meter EMF/RF shield uses patent pending magnetic holders to keep shield in place, the device can fit most, but not all, meters sold across the US and Canada. Measures 7 inches in diameter at the base. Install on your own: slide the cover in place over the meter's glass portion and adjust accordingly for a tight fit. No assembly and complicated installations required..
Sturdy And Weatherproof - Most smart meters are located outdoors that is why the RF smart meter cover is created with high grade, spot-welded 316 stainless steel meshing. This type of steel material ....
ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control
ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications
Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications
Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Siemens 3UG4631-1AA30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24VAC/DC Auxiliary Voltage
Features: Undervoltage protector integrates three-phase voltage protector, chronograph and counter in one.
Multifunction: The protection relay has protection functions such as overvoltage, undervoltage, phase loss, phase sequence, three-phase voltage unbalance, etc.
Practical functions: The voltage monitoring relay has functions such as start-up delay and output test. 2 rest module optional, manual and automatic.
Specification: Monitoring Circuit: L1, L2, L3.
LCD Display: LCD data display, easy to read, no external power supply required.
