Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs
Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.
ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Shelly 3 EM Wireless 3-Phase Energy Meter Remote Control Sunrise/Sunset Weekly Schedules Device - 1 Pack
POWER MEASUREMENT & CONTROL: Shelly 3EM gives owners enhanced safety and everyday control over appliances or machinery, along with the ability to make smart decisions about electrical consumption. The 3EM is a Wi-Fi energy measurement device, monitoring up to three phases between 110 and 240v per line..
MONOPHASE SYSTEMS: Shelly 3EM can calculate 2-way consumption: produced and used energy for each of the three phases. The device can be configured to measure three separate points of a mono-phase electrical system and measure each of them separately..
CONTACTOR CONTROL: Shelly 3EM has an integrated 10A relay output for contactor control..
NO HUB REQUIRED: You can control Shelly 3EM directly, no hub required. It is compatible with any Wi-Fi router. Or if you prefer you can connect it to your home automation platform..
OVERCONSUMPTION PROTECTION: Shelly 3EM can automatically notify and/or switch off the circuit if consumption or energy reaches the preset limit..
ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control
ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Dyna-Living Wind Turbine Generator 400W DC 12V 3 Blade Wind Turbine Motor with Charge Controller for Home Use Boat or Industrial Energy(Not Included Mast)
...]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability. The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity..
[Wide Application]-This wind turbine generator is easy installation and maintenance, which is suitable for the leisure sector, such as being used for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy for electricity supply.
GridGear kWH Electric Meter, 208/120/240V, 4W, with 3 200A or Less Solid Core CTs, Surface Mount Kit with Outdoor Enclosure
Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.
3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications
Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
