Best Three phase Induction Motors

Honeywell S688A1007 Sail Switch

  • Simplified installations with multi-speed fans, in- accessible air handlers, fan motors with voltage or phase different from controlled equipment.
  • Polyester film sail mounted on a micro switch snap switch.
  • Removable spring counterbalances sail to allow mounting in either vertical (up or down) or horizontal air flow.
  • Low air velocity switch operation makes at 250 fpm and breaks at 75 fpm.
Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Husky 1 Gal. Portable Electric-Powered Silent Air Compressor

  • 【Ultra Quiet & 3 Times Long Life】Stealth Innovative Quiet System Air Compressor Have Been Tested To Be Up To 80% Quieter And Qualify To 3 Times Longer Life Than Standard Induction Motors.
  • 【Powerful Outputs Maintenance Free】Peak 1.3 Horsepower Induction Motor Drive The Dual Air Pump To Generate The Continue Compressed Air, Safe Guard Your Working Complete Easily. Oil-Free Maintenance Free.
  • 【Cold Weather Start & Quick Recovery】Easy Start Even Under Low Temperature And Low Voltage. Peak 150 Psi 3 Cfm @ 90Psi. Recover From Empty Tank To Full Only Need 70 Seconds.
  • 【Stable Structure& Convenient For Movement】Stable Heavy Duty Housing Use Q235B Steel, 6 Inch Rubber Reinforced Wheels, And Upright Roller Bag Design Convenient For Movement. Number Of Stages-1-Stage.
  • 【WHAT YOU GET】Stealth SAQ-1413 Air Compressor x 1, 6’ Electric Cord x 1, User Manual x 1, Lifetime Warranty.
Check Stock

Grizzly Industrial G0513-17" 2 HP Bandsaw

  • Blade sizes available 1/8-Inch - 1-Inch • Standard blade length: 131 1/2-Inch • Blade speeds: 2 speeds 3500 1600 FPM • Approximate ship.
  • Motor: TEFC capacitor start induction 2 HP single-phase/60 Hz 110V/220V • Amps: 20/10 • RPM: 1725 • Power transfer: Belt d.
Check Stock

Grizzly G0514X Extreme Series Bandsaw 3 HP 19-Inch

  • Motor: 3 HP 220V single-phase TEFC capacitor start induction 60 Hz pre-wired 220V.
  • Overall size: 78-InchH x 36-InchW x 32-InchD.
  • Wheels: fully balanced cast iron with polyurethane tires • Wheel covers: pre-formed hinged steel.
Check Stock

Grizzly Industrial H2936-28 x 39 Downdraft Table

  • Motor: TEFC capacitor-start induction, 1/2 HP, single-phase, 110V.
  • Non-marring rubber grommets to support work.
  • Two 110V outlets for plugging in portable sanders.
Check Stock

Grizzly Industrial H7587 - Resaw Fence Complete for 14 Bandsaws

  • Motor: 3 HP 220V single-phase TEFC capacitor start induction 60 Hz pre-wired 220V.
  • Overall size: 78-InchH x 36-InchW x 32-InchD.
  • Wheels: fully balanced cast iron with polyurethane tires • Wheel covers: pre-formed hinged steel.
Check Stock

10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat

  • ...00W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
  • 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
  • 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
  • Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"output"""" lines are connected (do not distinguish between zero line and firewire). Rotate the potentiom....
Check Stock

Phase Rotation Meter, SP8030 3 Phase Battery Free Phase Sequence Detector for Industry for Electrician

  • Professional choice: check the phase sequence and indicate whether the phase is open..
  • Large measuring range: the indicator can check three-phase AC voltage from 200V to 480V, with excellent performance..
  • The results are clear at a glance: LED lights can display phase loss and support buzzer instructions..
  • Safe and secure: equipped with a clip to facilitate contact with the terminal to ensure safety and reliability..
  • Portable design: small and light, with a portable bag, easy to carry..
Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock