Best Thrust Needle Bearing

Volvo S70 and S70 T5 TD04: Turbo Rebuild Guide and Shop Manual

  • Dual Oil Port Machined from Copper Bar Thrust Bearing.
  • For Subaru WRX, Saab, Hyundai Genesis, Volvo, and More!.
Check Stock

Sealmaster NP-26 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-5/8" Bore, 2-1/8" Base to Center Height, 5-3/4" Bolt Hole Spacing Width

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Ventilator, Turbine, 6in

  • Price For: Each Overall Width - Roof Ventilators: 12-3/4" Overall Width (In.): 12-3/4 CFM @ 4 MPH Wind: 147 Requires: Base for New Installations, Flashing Item: Turbine Ventilator Item - Roof Ventilators: Turbine Ventilator Construction Material: Galvanized steel With Aluminum Bracing Includes: - Type: Wind Driven.
  • Bearing System: Features Oiless Bronze Upper Bearing and Lower Thrust Type ball bearing Overall Height - Roof Ventilators: 14-1/2" Throat Dia.: 6" Overall Height (In.): 14-1/2 Bracing - Roof Ventilators: External Bracing: External Country of Origin (subject to change): United States.
Check Stock

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Bettomshin 2Pcs F3-8M Thrust Ball Bearing 3mm Bore 8mm OD 3.5mm Width P0Z1 GCr15 Axial Ball Thrust Bearings

  • 【Dimension】Bore Diameter : 3mm / 0.12".
  • 【CAPABILITY】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads.
  • 【MATERIAL】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness.
  • 【APPLICATION】Can be used for jack, pump, rotating applications, machine tools ect.
  • 【FEATURES】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time.
Check Stock

H-Beam Connecting Rods for Toyota Supra MK4 2JZ-GE 2JZ-GTE 2JZ

  • Double honed bearing surfaces provide absolute reliability at high RPM.
  • Increased wrist pin lubrication with double drilled small end.
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication.
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes.
Check Stock

Micro Traders 8pcs Miniature Plane Thrust Ball Bearings F10-18M Single Direction Chrome Steel for Oven Turntable Jack Pump 10x18x5.5mm

  • Size: Bore Diameter10mm, Outer Diameter18mm, Thickness5.5mm..
  • Material: Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness..
  • Capability: Dynamic Load Rating (Cr): 2.23kN.
  • Limiting Speed (Grease): 2500rpm, designed for low speed operation and axial loads only, can withstand high thrust loads..
  • Application: Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, motors, generators, gear devices and compressors, ect..
  • Feture: The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
Check Stock

TOPEMAI 7.3L Powerstroke Turbo Upgraded 360°Thrust Rebuild Kit Compatible for 1994-2003 Ford Garrett GTP38 TP38 Replacement 817-1004-002F by TOPEMAI

  • GTP38 Rebuild Kit fits 1994 - 2003 Ford 7.3L Powerstroke Turbochargers,for Ford Excursion F-350 Super Duty E-350 Club Wagon F-250 Super Duty E-350....
  • GTP38 Rebuild Kit is durable,upgraded 360 Degree Copper Bar Thrust Bearing,Copper helps dissipate heat much better than the factory steel thrust....
  • 94-03 Powerstroke 7.3L Turbo Upgraded 360°Thrust Rebuild Repair Kit for Ford replace Turbo P/N:817-1004-002F,813-1002-002.
  • With the upgrade turbine side stepped gap piston ring, it can also eliminates the oil leaking problem. Every Item per Garrett Turbocharger Standard....
  • Feel free to contact us by emails if you have any problems..
Check Stock

PULSAR 2003-2007 6.0 Turbo Compressor Drop In DIY Upgrade Kit

  • Upgrade with the sized .80 A/R compressor housing and the larger 63.5mm billet compressor wheel which flows more air compare to the stock turbo.
  • The kit comes with the 360º thrust bearing handles more thrust force over the stock 270º one, both seal rings have staggered step gap which reduce oil from leaking out.
  • The kit is designed to fit all stock 6.0 turbos, will the help of the hardwares in the kit, you can install it easily..
  • Fits turbo model: Garrett VGT GT3782VAS Turbo.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock