Best Thrust Spherical Roller Bearing

uxcell AXK1024 Thrust Needle Roller Bearings with Washers 10mm Bore 24mm OD 2mm Width 10pcs

• [MODLE] - Bearing Model: AXK1024 (I.D.=10mm, O.D.=24mm, Thickness=2mm).
• [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
• Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
• [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
• [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
• [CAPABILITY] - 24.5kN Static Load Capacity, 9.15kN Dynamic Load Capacity, 14000RPM Maximum Rotational Speed.

HIC 22310 Spherical Roller Bearing, 22310RW33FY HIC Roller Bearing, 50MM Straight Bore, 110MM Outside Diameter

• Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
• Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
• C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor.
• Straight bore fits conventional cylindrical shafts.

XMHF 4pcs 51204 Carbon Steel Axial Thrust Ball Bearing 20mm x 40mm x 14mm

• Package Content : 4x Thrust Ball Bearing.

PULSAR 6.6 Duramax LLY Turbo Rebuild Kit Billet Compressor Wheel 2004.5-2005

• 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible,Spool up faster, Lower EGTs and More Boost!.
• 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
• Fits 2004.5-2005 Chevy/GM 6.6L Duramax LLY Garrett GT3788VA Turbo ONLY.
• BE AWARE this compressor wheel doesn't fit LB7 LBZ turbos.

DNJ TW500 Thrust Washer For 85-01 Chevrolet, Suzuki, Geo, Metro, Swift, Samurai, Sidekick, Sprint,1.0L-1.3L, L4, L3, SOHC, DOHC, Naturally Aspirated, Turbocharged

• Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
• Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
• Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
• Manufactured to meet or exceed OE specifications.

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

• Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
• Set screw locking for secure attachment to shaft.
• Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
• Grease fitting on the housing for reapplying lubricant.

PULSAR 03-07 6.0 Turbo Rebuild Kit 6.6 Duramax LLY LBZ Staggered Step Gap Seals

• 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
• Staggered step gap compressor and turbine ends seal rings reduce oil blow by of the seals.
• Fits 2003-2007 Ford 6.0L Diesel F250 F350 F450 F550 GT3782VA turbo.
• Fits 2004.5-2007 GMC/Chevy 6.6L Duramax LLY LBZ Silverado Sierra HD GT3788VA.

DNJ TW950 Thrust Washer For 88-04 Toyota, Lexus, Tacoma, Tundra, 4Runner, T100, Pickup, ES300, Camry, ES250, 2.5L-3.4L V6, DOHC, SOHC, Naturally Aspirated

• Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
• Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
• Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
• Manufactured to meet or exceed OE specifications.

FAG 22213E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 65mm ID, 120mm OD, 31mm Width, 6700rpm Maximum Rotational Speed, 208kN Static Load Capacity, 200kN Dynamic Load Capacity

Enduro ABEC-5 Angular Contact Bearing, 71903 17X30X7-71903 LLB

• Single-row angular contact ball bearing, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant.
• Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity.
• Open configuration for lubrication applied in place.
• Brass cage evenly spaces balls for reduced friction, vibration, and noise.
• ABEC 1 tolerance ratings for accuracy and low rotational speeds.