EARISE T12 Pro Karaoke Machine with Room-Filling Lights + T15 Portable PA System Speaker with Wired Microphone
What You Will Get: EARISE T12 Pro Karaoke Machine.
EARISET15 PA Speaker. (They will be shipped separately).
Unique Ring Lights Design: Besides the large disco ball light on the top, T12 Pro is equipped with ring lights on both sides. Not only make the ceiling of your room full of brilliant colorful lights but also make amazing ring-shaped lights on the floor at the same time..
Electrifying Party Speaker: The overflowing bright colors of the eye-catching LED disco light ball and ring lights adds a whole new level of fun to your music, bringing an amazing party atmosphere. Enjoy dancing and singing in the really room-filled lights..
Karaoke Duet Even Trio: Come with 2 wired microphones, it's perfect for duet performances. There are 3 microphone jacks so it can connect up to 3 wired microphones at the same time. Either a karaoke duet or a trio can be achieved easily!.
All-In-One Karaoke Speaker: The T15 Speaker with FM radio has a built-in Bluetooth 4.2 with a working range up to 33ft. Easy connection to Bluetooth, AUX, TF/USB input. Besides, the USB port enables power bank function to recharge your smartphone/tablet..
Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Wiha 32097 | 7 Piece Insulated SoftFinish Screwdriver Set
Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Billet Muscle Compatible with Chevy GMC 69-94 Steering Wheel Set Engraved Horn
The TM RALLY WHEEL Add-On Sparco R383 Mod wheel measuring 13" in diameter and produced under official license by Sparco.
Compatible with the Thrustmaster ecosystem, it can be used with Thrustmaster T-Series bases. This high-end equipment delivers optimum practice conditions for e-Sports competitions..
The wheel features 9 action buttons and a directional with a push-button function enabling the player to keep both hands on the wheel at all times as they would in real-life rally racing conditions.
Its ergonomic design delivers a pleasant feel, even during the wildest races, thanks to its suede covering and large diameter (13"/33 cm), suited to the most intense maneuvers..
Alla Lighting 2600lm T15 921 912 LED strobe Flashing Lights Bulb, Red Center High-Mounted Stop Lamp(3rd Brake Lights) W16W 922 921LL 912LL, Xtreme Super Bright 4014 48-SMD
(Set of 2) T15 912 921 strobe LED bulbs will strobe 3-4 times on & off at the beginning reversing or braking mode for much easier notified and safer stop, and then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision. LED Type: 48 pieces high power & high illumination 4014 SMD led chips per 912 921 strobe flashing LED backup reverse brake light bulb. Working Power: 5.5W.
Light Output: about 1300 lumens per T15 912 921 led backup light bulb, 2600 lumens for both 912 921 LED reverse lights bulbs. Size: 0.55" in width, and 1.66" in length.360° full view angle. No UV or IR radiation..
Easy to use.Built-in intelligent IC driver for better performance.Energy-Saving, Low temperature, Long Lasting..
Use for upgrading the stock T15 T10 wedge bulbs, directly fit 906 902 904 912KX 912K 921K 921KX 921LL W16W 912 921 back up reversing light. 3rd-brake light (stop light) ,cargo trunk lights, turn signal light, tail light bulbs lamp..
12 Months Warranty. Best US customer service and solve the issues at the first time of working hours. Color: 6000K Xenon White..
Hikig 2 Set The Desk Mount for The Flight Sim Game Joystick, Throttle and Hotas Systems. Fully Support Almost All of Flight Sim Game Hand-control Devices Compatible with Thrustmaster HOTAS Warthog
T15 Torx Security Screwdriver, TECKMAN Torx TR15 Screwdriver for Dishwasher and other Devices Repairs
[TAMPER PROOF T15 TORX SCREWDRIVER]: This is a tamper proof TR15 torx security screwdriver which has a hole in the bit center..
[APPLICATION]: This t15 torx security screwdriver is a MUST have tool for dishwahser torx screws removal..
[S2 STEEL MATERIAL]: The screwdriver bit is made of specially hardended S2 steel which is durable for use..
[NON-SKID PLASTIC HANDLE]: The screwdriver handle is made of PP and TPR material,non-skid and comfortable to hold in hand.The cap at the top is flexible which make it easy to rotate..
[MAGNETIC]: This TR15 torx security screwdriver is magnetic which is helpful to hold tiny screws,convenient to use..
Crescent CP4PCSET 4 Pc. Phillips® Acetate Screwdriver Set
Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
