Best Tie Rod Cylinders

uxcell UHS Radial Shaft Seal 11.2mm ID x 19.2mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

[Size] - 11.2mmx19.2mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

【Model】Pneumatic Small Thin Cylinder.
【Working Pressure:】0-1.0mpa | 0-145psi..
【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..

【Model】Pneumatic Small Thin Cylinder.
【Working Pressure:】0-1.0mpa | 0-145psi..
【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..

Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
Features: Large load rating, low noise, anti-corrosion, tough, and durable..
Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..

Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
Features: Large load rating, low noise, anti-corrosion, tough, and durable..
Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..

Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
Features: Large load rating, low noise, anti-corrosion, tough, and durable..
Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..

FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut ).
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint.

Compatible with: 2000-2005 for Ford Excursion - [2000-2004 for Ford F-250 Super Duty] - 2000-2004 for Ford F-350 Super Duty.
1x Front Right Stabilizer / Sway Bar End Link.
1x Front Left Stabilizer / Sway Bar End Link.
1x Front Passenger Side Inner Tie Rod End.
1x Front Passenger Side Outer Tie Rod End.
1x Front Passenger Side Adjustment Sleeve.
Excellent Quality : Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability.
Quality Warranty: 18-Month Warranty & Best Service!.

Performance: Strengthened steel alloy construction for powerful and reliable operation, even on stuck or seized parts.
Safely and easily extracts Pitman arms, tie rods, and ball joints.
Compatibility: The 5 adjustable front end service tools fit hundreds of makes and models, including most American, European, and Japanese vehicles.
Domestic and imported cars and light trucks.
Convenience: Never miss a job when you have the right front end tools on hand.
High-quality plastic carrying case maximizes organization, storage, and transportation.
Simplicity: The processes to remove Pitman arms, tie rods, and ball joints are outlined in the included manuals.
Easy to follow instructions in both English and Spanish.
Specifications: 1 Ball Joint Puller, 1 Heavy Duty Tie Rod Puller, 1 Pitman Arm Puller, 1 Pitman Arm/Tie Rod End Puller, 1 Ball Joint/Tie Rod End Puller, 1 Carrying Case.

【Fit Models】Golf Cart Ball Joint Kit Club Car Precedent 2004-UP and 2018-up Tempo Golf Cart..
【Replace OEM Part】2 Pcs Right Thread Club Car Precedent Tie Rod End，OEM#1020226-01,1022883-01,102022601,102288301..
【Function】2 Pcs Tie Rod End M12 X 1.25 (Right Thread), Club Car Precedent Golf Carts Use Right Thread Rod End on Both Sides..
【Easy Installation】Ball Joint Kit Well Made, Meets OEM Specifications, Please Carefully Check the Year, Model and Serial Number of Your Golf cart Before Purchasing..
【Package Content】 2 Pcs 102022601 1020226-01 Right Thread Tie Rod End Included..