The cooler fishing rod holder is made of heavy duty polypropylene and powder coated steel which is durable and strong for long lasting use, bracket designed for coolers with tie-down slot to hold fishing pole and drinks on boat, truck, kayak..
A fishing rod holder with two drink racks. Good for yeti cooler, rod holster can give a strong support to storage your fishing rod or drinks so that you could easy to access them, and it will bring you a better fishing experience.
For RTIC cooler rod holder, could be easy to install into the cooler tie-down slot without getting in the way of the cooler lid, just attaches to the tie-down slot on either end of cooler, and hold rods neatly and securely, protect your fishing rod from any damage.
The dimension of fishing rod holders is about 12.6" Long x 10.83" wide that perfectly fits for all YETI Tundra, TANK, and Roadie coolers and RTIC Coolers with tie-down slot, works with all casting and spinning rods. Drinking holder is about 3.5'' long x 3.5'' high, suitable for canned drinks..
Each set can holds a fishing pole and 2 drinks, for ....
Orion Motor Tech OMT Inner Tie Rod Tool Kit in SAE Sizes, Inner Tie Rod Removal and Installation Mechanics Tool Set with 1-3/16" 1-5/16" 1-7/16" Crowfoot Adapters
TIE ROD REMOVAL TOOL: This inner tie rod removal tool kit by Orion Motor Tech includes an ultra-long tie rod remover and 3 crowfoot adapters to let you quickly and easily remove and install your vehicle's 1-3/16", 1-5/16", and 1-7/16" tie rods.
SAFE & SECURE: Our inner tie rod tool’s 16 inch long sleeve and unique collar let you service inner tie rods in places where sockets and wrenches can’t fit, while its 6-point design and knurled grip keep you in total control at all times.
UNIVERSAL COMPATIBILITY: This master inner tie rod removal tool set is compatible with most vehicles, including FWD vehicles with new style tie rods, RWD vehicles with racks and pinions, and cars with Saginaw steering gear.
DURABLE CONSTRUCTION: Made of quality carbon steel, our tie rod installer and remover set provides strong and dependable long-lasting service.
the puller is heat treated and blackened for superior strength and corrosion resistance.
EASY TO USE: This 4 piece mechanic tool set works with your 1/2"-drive wrench or breaker bar for powerful leverage.
SuperATV Heavy Duty Tie Rod Kit for Polaris Ranger XP 900 / Crew (2013+) - Complete with Chromoly Ends - Stock Length Replacement
✔️【Fits】Compatible with 2016+ Honda Pioneer 1000 / 1000-5 | NOTE: Models with 12" wheels will require a 1" wheel spacer.
【Reliable and Strong】The Honda Pioneer 1000 is a powerhouse that pushes parts hard, so get SuperATV’s Heavy-Duty Tie Rod Kit to get parts that are up to the task. Our tie rod kit has knuckle-to-knuckle strength to keep you in control through every obstacle..
【Swaged Tubes are Stronger】Made with swaged 4142 chromoly steel alloy to make this kit as strong as possible. The swaged design prevents bending or shearing much better than standard straight rods..
【Kit Includes】Swagged tie rod shafts, tie rod ends, inner ball and sockets, all boots and zip ties, and misalignment bushing hardware..
【Ride with Confidence】Our kit is built to match the tank-like strength of your Pioneer 1000 or 1000-5 because we know how dangerous breaking a tie rod end can be. Ride safer and stronger with our heavy duty tie rod end kit..
Toolwiz Universal Inner Tie Rod Hex Wrench Repair Removal Tools 27-42mm for Car Truck Vehicle Motorcycle, Inner Tie Rod Removal Tool Compatible with Mercedes Benz, BMW, Toyota, Honda, Ford
Toolwiz inner tierod removal tool is designed specifically for the removal of the direction of the steering rod.
This inner tie rod remover is suitable for tie rods between 27mm and 42mm in diameter.
Inner Tire Rod Removal Tool: Easily removes inner tie rod ends without removing rack and pinion.
This inner tie rod tool is specially designed to be used with 1/2" square drive tools.
Inner tie rod tool removal is universal fits for various vehicles, compatible with Mercedes, Benz, BMW, Toyota, Honda, and more.
Orion Motor Tech OMT Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool for Tie Rod Removal and Installation, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube and Tool Case
INNER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion.
the 1/2 Inch drive tube handle with a 2.2 in inner diameter allows servicing on small cars, pick-ups, and SUVs.
12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm.
UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit.
works on inner tie rods with inaccessible wrench flats.
SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength.
the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters.
the knurled handle provides firm control.
HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use.
Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set
Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
KISEER 5 Pieces Cake Separator Plates Stands with 24 Pieces Plastic Cake Dowels Rods and 15 Pieces Clear Cake Sticks Support Stacking for 4 6 8 10 12 Inch Tiered Cakes
Material: Our cake separator plates and dowel rod is made of high-quality plastic, strong, durable, smooth surface, not easy to wear, not easy to break, can be used repeatedly..
Sticks Support Rods and Stacking Dowels: Sticks Support Rods length is 24cm, thicker, harder and longer. It is not easy to break and has stronger supporting force. It can support the cake and is suitable for floating cake. Stacking Dowels length is 19cm, easy to cut, can cut according to the height of the cake, the pointed bottom is easier to insert into the cake..
Easy to Use: Step 1 Compare the height of the cake. Step 2 Cut the cake dowel rods. Step 3 Insert the cut cake dowel rods into the plates. Step 4 Insert sticks into the cake. Step 5 Put the second layer of cake on top of the first layer..
Size: There are 5 sizes of cake separator plates, diameter is 9cm, 12cm, 16cm, 20cm and 26cm, Suitable for 4,5,6,8,10,12,14 inch cake. Note: in order not to affect the beauty of the cake, the size of the cake separator plates will be smaller than the size of the cake..
Package Includes: 5 pcs cake separator stands, 24 pcs cake support rods, 15 pcs stacking dowels. Suitable for cake shop, party, making beautiful wedding cake, or birthday cake..
2 PCS Lash Lift Perm Tools and Tint Kit, EKYSSO Eyelash Lifting Tool, 2 in 1 Eyelash Separator with Separating Comb, Professional Lash Lift Comb Perming and Tinting Supplies
Unique Desigin: The lash lift applicator is a innovative design. The double-sided perm tool with separation comb is a 2 in 1 eyelash lifting tool. The tool’s needle is removed and optimized the needle angle to use more comfortly. And it adds the comb to lift and separate eyelashes..
Quality Material: The lash separator tool is made of high-quality stainless steel, solid and sturdy, hard to break, comfortable to hold and use, lightweight and compact. It is sturdy and well made for beauty salon daily use..
Easy To Use: The Eyelash lift tool is very user-friendly. One point can comb lashes, the sharp point makes it easy to separate the lashes once they’re on the rod, but when held to the side, can easily sweep the lashes up onto your rod or shield..
Package Contains: There are 2 pieces of pink color lash lift tool separator extensions in the package..
Reminder: The lash lift perm tool is for professional use only in beauty salon..
