Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm
...e centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
Part number(s) included (in factory packaging): 59076-3.
Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran
...e centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
Part number(s) included (in factory packaging): 59076-3.
The Tires and Wheels Not Glued. You need to you glue the edges of the inside of the wheels&tires.
Fits for Traxxas Rustler VXL 2WD, Traxxas Rustler 4x4, Traxxas Stampede VXL 2WD, Traxxas Stampede 4x4, Redcat Volcano EPX Pro, Redcat Blackout XTE Pro, and most 12mm Hex Hubs 1/10 Scale Monster Truck Off Road Models..
Note the cheap ones. The Wheel Rims Made of high quality Nylon, Durable, NOT EASY BROKEN when working with 2S 3S Brushless. Quality Rubber & Foam, Good Grip & Wear-resistant.
Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.
TruXedo Lo Pro Soft Roll Up Truck Bed Tonneau Cover | 592301 | Fits 2005 - 2021 Nissan Frontier 5' Bed (59.5\)
Fits 2005 - 2021 Nissan Frontier 4' 12" Bed (59.5").
AMERICA’S #1 CHOICE | The best-selling roll-up truck bed cover in North America. Lo Pro’s tear-resistant, leather-grained vinyl provides superior weather resistance, and comes standard with aircraft grade aluminum bows designed to take on a heavy snow load.
SIGNATURE LOW PROFILE DESIGN | Sitting only 3/4” above the truck bed, Lo Pro is sleek and concealed. This roll-up truck bed cover mounts inside the rails of the truck bed, providing full access to stake pocket holes for use with additional accessories.
NO DRILL INSTALLATION | Fully install this roll-up truck bed cover in under 30 minutes! Easily clamp the rails onto your truck bed, attach the cover, roll and hit the road. No drilling or special tools necessary.
WE'VE GOT YOU COVERED | Lo Pro is backed by a lifetime, no hassle warranty. We are committed to providing you the best service at all times, if you need replacement parts simply call our team.
Signature, low-profile design allows the cover to sit only 3/4" above the truck bed.
Trouble-free installation and use - no drilling or special tools required!.
Anodized single trigger latch requires only one finger to open the cover and our Quick-Release System allows the entire cover to be rem....
Linkitom Magnetic LED Trailer Towing Light Kit, 24ft Cable with 7 pin plug, IP68 Waterproof, DOT Approved, for 5 Wire Vehicle
Some trucks, cars, and SUVs (like 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550)are 4-wire systems, this trailer light is not fit for them, because Red brake lights and flashing orange Direction Indicator lights control by the separate circuit.
Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
cciyu HVAC Blower Motor Resistor Fan Heating and Air Conditioning Blower Motor Resistor AC Blower Control Module fit for Nissan Armada/Frontier/Pathfinder/Quest/Titan/Xterra
EFFECT OF BLOWER MOTOR FAN RESISTOR: The main function of the HVAC blower motor resistor is to control the speed of the wind and quickly restore the vehicle’s heating and cooling system to its original peak performance. Durable design resists hot fuse failure, overheating and burnout..
BLOWER RESISTANCE KIT: If you can’t adjust the wind speed with the AC controller, or the AC system can no longer control the speed of the wind, you only need to replace the new blower resistor and control the fan speed in the AC and heating system again..
PREMIUM QUALITY: Our high quality HVAC blower motor resistance module meets or exceeds OEM standards and is 100% tested before shipment. We only use quality materials to enhance your car performance. On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area..
ECCPP Timing Belt Water Pump Kit Fit for 1996-2004 Nissan Frontier Xterra Pathfinder Infiniti QX4 3.3L V6 SOHC 12 Valve VG33E VG33ER Engine
FITMENT - Timing belt fit for 1997 1998 1999 2000 Infiniti QX4/1999 2000 2001 2002 2003 2004 for NISSAN Frontier/1996 1997 1998 1999 2000 for NISSAN Pathfinder/2000 2001 2002 2003 for NISSAN Xterra 3.3L V6 SOHC 12VG33E VG33ER Engine.
FUNCTION - Drive the air distribution structure of the engine to properly open and close at the time ofand ,and ensure that the engine cylinder can be opened and closed normally.
ADVANTAGE - With less noise, less transmission resistance and smoother operation,it can guarantee the normal power output and acceleration performance of the engine, reduce the spoilage of the car.
MATERIAL - High performance material can reduce the crack caused by belt deformation and extend the service life.
NOTICE - Check part number and fitment chart carefully before place order. Please feel free to contact us if you have any question regarding our this product.
StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 4/114.3 (4/4.5") bolt pattern and 66.1mm Centerbore. Compatible with Nissan 84-88 200SX, 88-94 240SX, 95-98 240SX Base Model, 240Z (Rear Hub), 260Z (Rear Hub), 280Z (Rear Hub), 280ZX (Rear Hub), 84-86 300ZX. Compatible with Nissan 93-01 Altima, 09-11 Cube, 85-88 Maxima, 00-10 Sentra. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
[SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing....
