Best Tires For Traxxas Rustler Vxl

Traxxas TRA3719 Body, Rustler VXL, ProGraphix

  • Traxxas 3719 - Rustler VXL Body, Pro-Graphix, Decals.
  • Part number(s) included (in factory packaging): 3719.
Check Stock

Traxxas E-Revo VXL 1/16 4WD Brushless RTR Truck (Blue)

  • Traxxas 71076-3 - E-Revo VXL 1/16 4x4 Monster Truck RTR W/TSM, BlueX.
  • Features: Traxxas Stability Management. 2-amp DC Peak Detecting Fast Charger. 7.2 volt NiMH battery pack with iDTM. TQi 2.4GHz radio system. Race-inspired suspension technology and integrated chassis design, perfectly optimized for 1/16 scale. Powered by the Velineon Brushless Power System Patented Traxxas High-Current Connector allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Velineon VXL-3m Electronic Speed.
  • Includes: (1) E-Revo VXL Racing Monster Truck (1) TQ 2.4GHz Radio (1) Body, One(1) 6-Cell Battery (1) Charger (1) Extra Pinion Gear Instruction Manual.
  • Specs: Vehicle Dimensions: Length: 12.9" (328mm) Width: 9.4" (239mm) Height: 4.6" (117mm) Front and Rear Track: 9.4" (239mm) Distance Between Outer Edges of Wheels Wheelbase: 7.9" (202mm) Ground Clearance: 1.7" (43mm) Body Dimensions: Length: 11.3" (288mm) Width: 4.3" (110mm) Height: 2.8" (71mm) Spur Gear: 45 Tooth Gear: 28 Tooth 48 Pitch Tires, 1.8" (46mm) Wide, 3.2" (82mm) Diameter Wheels, 1.5" (38mm) Wide, 2" (51mm) Diameter, 12mm Hex.
  • Part number(s) included (in factory packaging): 71076-3.
Check Stock

RCPOWER 11.1V 6200mAh 3S Lipo Battery 100C Hard Case with T Plug for RC Vehicles, RC Quadcopter Helicopter Battery, RC Car/Truck, RC Boat DJI Airplane (2Packs)

  • 【6200mAh Lipo Specification】- Material: Lithium polymer.
  • 【Dimensions】- RCPOWER 11.1V 6200mAh 3S lipo dimension is: 139*47.5*37.5mm/5.47*1.87*1.47inch.
  • 【High Performance】- RCPOWER 3S lipo battery with 100C discharge rate hardcase offers you very high power and very long run time for your RC cars. They are widely fit the 1/8 and 1/10 RC car model..
  • 【Application】- Suitable for Rustler VXL Bandit VXL Stampede VXL Stampede 4x4 VXL, car, truck, ARRMA, Associated, Axial, Duratrax, Losi, Ofna, Traxxas, Vaterra, etc (Only if the voltage, dimension and the plug match, then it will fit).
  • 【Protective Device】 - It comes with an equipped charge Plug: T plug with protective switcheasy colors, they are your ideal chooses for helicopters..
Check Stock

STAMPEDE 4X4 VXL MOTOR VELINEON 3500 BRUSHLESS #3351R SLASH RUSTLER TRAXXAS #67086-3

  • Make sure this fits. by entering your model number..
  • Will fit Slash, Stampede, Rustler Bandit & Many other models..
  • Updated 3500 Motor for use with VXL-3S 3355R ESC (Not Compatible with 3355x ESC).
  • 4-pole, 10-Turn, 3500Kv version with braided wires..
Check Stock

BIG BORE Shocks Upgrades Part for Stampede 2WD 4x4,Slash 2WD 4x4,Hoss 2WD 4x4,Rustler 2WD 4x4,ARRCat 1/10 Scale Front Rear Aluminum Metal Shock,4PCS RC Shocks Absorber,Silver,Replace #5862

  • 【Fits for Traxxas RC Car】 The big bore upgrades parts suitable for 1/10 Scale Slash 4x4 2WD, 1/10 Scale Stampede VXL 4x4 2WD, 1/10 Scale Hoss VXL 4x4 2WD , Bandit, Ford F-150 ,1/10 Scale Rustler VXL 4x4 2WD rc car..
  • 【Upgrade to Great Bumping】The rc shocks upgrades to provide big jumps,the big bore function provide optimal bump and jump control for your Traxxas model.The rc upgrades part contains a small amount of lubricating oil, which can be used directly without adding oil..
  • 【Long-lasting Performance】 The big bore shock offer incredible durability and near frictionless operation for ultra-smooth damping and long-lasting performance..
  • ✅ 【Heavy Duty Material】 Heavy duty rc shocks,made of Quality Materials and CNC machined for precision, Heavy duty good for big jumps,ensure high reliability and good compatibility, high protection and long durability..
  • 【What You Get】If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Your Satisfaction is Our Main Priority..
Check Stock

FriHobby RC Shocks All Metal Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 Big Bore Shock Set (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 4x4, Stampede 4x4 VXL, Rustle 4x4 VXL, Hoss 4X4 VXL, Bandit RC Trucks.(Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor).
  • The slash shocks is made of Aluminum Alloy material,high protection and long durability, improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

2.8'' Tires and Wheels 12mm Hex Pre-Glued 1/10 Monster Truck Tyres Sets for 1/10 Traxxas Rustler Stampede Redcat Volcano Epx S30 Blackout XTE Off-Road Cars Models, Set of 4

  • The Wheels Tire Sets used for 1/10 Scale 12mm hex monster truck, fit for Traxxas Rustler VXL 4X4 and 2WD, Stampede 4x4 and 2WD, Redcat Volcano EPX S30, Blackout XTE Pro, Losi, JLB Cheetah Brushless Cars.
  • Outer Diameter: 4.96" (126mm) | Inner Diameter: 2.68" (68mm) | Width: 2.83" (72mm) | Hex Size: 12mm, Axle Hole:5mm.
  • The rims made of quality Reinforced nylon, durable;The tires made of quality rubber with standard foam insert. The RC Truck Tires and Wheels sets are Assembled Pre-glued..
  • Anti-skid effect designed,special design surface texture, it has more grip, it will be suitable for the pavement, dry grass, hard-packed dirt, and loose surfaces, etc..
  • Quality Guarantee, 100% Customer satisfaction is our priority, if you have any issue about this tyre set, please feel free to contact us, we are here for you..
Check Stock

Hobbypark 4PCS Aluminum Front & Rear Shocks Absorber Assembled for 1/10 Traxxas Slash 4x4 4WD 2WD Rustler Stampede Upgrades Option Parts, Replacement of 5862

  • ✔Compatible with 1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 / Hoss 4x4 VXL, etc..
  • ✔Check Size before Buying.2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

Blue Metal Full Set RC Car Upgrade Parts for 1/10,Front & Rear Shock Tower Front & Rear Suspension Arm Steering Block Kit for 1/10 Traxxas Slash 2WD,Rustler,Stampede,Bandit

  • Metal Full Set RC Car Upgrade Parts Fits for Traxxas 1/10 Slash, Stampede, Rustler, Ford F150 SVT Raptor, Robby Gordon Dakar, Bandit, Monster Jam Series,Nitro Stampede,1/10 Nitro Slash 2WD,Bigfoot 2WD,Stampede VXL,Rustler VXL.
  • Precision CNC Machined Hop Up Part for Factory Spec Fitment. Easy and convenient to install and remove..
  • Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance..
  • It is light yet strong with good polishing performance.High precision, good matching, perfectly fit your RC car..
  • Your Package List : 1 pcs Rear Shock Tower,1 pcs Front Shock Tower,1 pcs Caster Blocks(L),1 pcsCaster Blocks(R),4 pcs Suspension Screw Pins,1 Pair Front Arm,1 Pair Rear Arm,1 pcs Steering blocks(L),1 pcs Steering blocks(R),5 pcs bearings (4 x 5x11x4mm ),4 pcs PTFE washers,4 pcs Screw Pins,1 pcsTie Bar (PC),1 pcs short axis carrier (L),1 pcs short axis carrier (R),4 pcs washers,1 pcs cranks (L),1 pcs cranks (R),1 pcs drag line,4 pcs bearing,1 pcs mounting screw,2 pcs Screws..
Check Stock

Rolling Chassis for Slash 4x4 VXL - Roller/Slider

  • Brand New Rolling Chassis for Traxxas Slash 4x4 VXL.
  • Add electronics, tires, and body to complete.
  • VXL 4x4 Chassis features Heavy Duty Links & T6 Aluminum Center Driveshaft.
  • Includes motor mount plate & all hardware to mount electronics.
  • Now Includes 13 tooth and 18 tooth pinion gears!.
Check Stock