Best Tool Adapter Bushing

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

PSE Archery Night Hawk Traditional Takedown Recreational Shooting Recurve Bow Right 62 - 50

  • CRAFTED FROM HARDWOOD - Constructed from hand-selected woods for an eye-catching look and great performance.
  • RELIABLE STABILIZER – The built-in stabilizer of the recurve bow helps minimize vibrations, minimize shock and produce less noise.
  • STABILIZER BUSHING – The stabilizer bushing offers dependability in the field and provide enhanced performance.
  • TOOL-LESS ASSEMBLY - This is a tool-less takedown bow which you can assemble in under 2-3 minutes and change limbs without remembering where you put....
  • A GOOD CHOICE FOR A BEGINNER - You find this is an easy bow to shoot, very light and durable.
  • it’s great to do some target shooting with and to get....
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

Dorman 38465 Door Hinge Pin And Bushing Kit Compatible with Select Ford/Mercury Models

  • Direct replacement - this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution - this pin and bushing are reliable replacements for original components that have failed due to wear.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Quick Hitch Adapter Fit for Category 1

  • Adjustable tractor top link adapter fit for Category 1 3-Point quick hitch..
  • Package including : 1 Set Quick hitch adapter, top pin and adapter bushing..
  • Width dimensions are inside 3”, outside 3.95”, Weight: 5.95 Ibs..
  • Function : Enables the Category 1 Quick Hitch to be used with implements that are not made to ASABE quick hitch standards..
  • Provide durability and reliability for all your farm, ranch, and home and garden needs.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

APDTY 143243 Transmission Shift Cable Bushing Replacement Kit With Install Tool Replaces 68064273AB

  • Allows Replacement OF A Failed Bushing Instead Of Total Shift Cable Replacement.
  • Restores Shifting Ability From A Failed Shift Cable Bushing.
Check Stock

Door Pin Guides & Door Bushing Removal Tool For Jeep Wrangler JK JKU JL JLU Sports Sahara Freedom Rubicon Unlimited & Gladiator JT 2/4-Door 2007-2021 Stainless Steel Hinge Bolts Guides Liners (17 Pcs)

  • Great Compatibility — Perfectly fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited & Gladiator JT 2-Door and 4-Door 2007-2021. (NOTE: Door Bushing Removal Tool did not fit TJ).
  • Superior Material — Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust. The heavy duty integral steel structure bushing removal tool has good rigidity, high precision and a long service life..
  • Effect — Help you line up the door pins against the hinge and put your doors back easily. Remove your corroded and worn out door hinge liners and replace the factory liners which are prone to rust with the new liners that rust and corrosion resistance..
  • Easy To Install — Use the door pin guides to align the top cap and lower the door so that the bottom is in place. Tap the door bushing removal tool with a hammer until the OE liners are totally removed..
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our items, simply return it for a full refund ....
Check Stock

Dorman 38400 Door Hinge Pin And Bushing Kit - 1 Pins And 4 Bushings Compatible with Select Models

  • Direct replacement - this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution - this pin and bushing are reliable replacements for original components that have failed due to wear.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Hooke Road JK Wrangler Door Hinge Bushing Liners Replacement & Metal Door Bushing Removal Tool Compatible with Jeep Wrangler JK & Unlimited 2007-2018 - 8Pcs

  • FITMENT: Hooke Road Door Hinge Bushings Replacement Compatible with Jeep JK & Wrangler Unlimited 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018.
  • FUNCTION: Restores proper door alignment, snug fit while allowing your doors to open and shut smoothly. The door bushing removal tool helps to remove your Jk corrosive hinges. It will prevent hinge scratches during door removal..
  • MATERIAL: The door bushing removal tool and hinge liners were constructed with mixed metal, great performance and repeated use are guaranteed..
  • INSTALLATION: Install these while replacing the hinge liners and refinishing the hinge bolts. Align top cap then proceed to let door down and the bottom will fall into place..
  • PACKAGE CONTENTS: Includes 8 Door Hing Bushings, 1 Removal Tool, and 2 Sand Paper..
Check Stock