Best Tool Box Drawer Slides

VEVOR Drawer Slides 500 lb Capacity 1 Pair 60 Inch Length Heavy Duty Drawer Slides Ball Bearing Side Mount Drawer Slides 3-Section Full Extension Heavy Duty Drawer Slides for Smooth Slide Less Noise

  • Three-Section Slides: 1 pair of 60"/ 152.4 cm in length, 3"/ 7.6 cm in width, 0.75"/ 1.9 cm in thickness. The fold and full extension drawer slides consist of three sections and can be fully pulled out to utilize the drawer's space (Actual size 60", extended size 120"/ 304.8 cm). And the slide drawers are also designed to ensure your drawers smoothly pushing and pulling..
  • Steel & 500 lbs Bearing: The heavy-duty drawer slides are constructed with thick cold rolled steel (CRS) plates for a strong bearing capacity of 500 lbs. Therefore, they are tough enough to bear the heavy wooden or iron things you need. In addition, zinc is plated on the surface to stay rust-proof, abrasion-proof for long-term service..
  • Smooth & Quite to Slide: Drawer hardware slides are equipped with ball-bearing action to create a quiet environment for your family and work. The row of balls on the two sides of sliding and the nylon buffer design on the second section, which aim to make less noise and friction at closing and open the drawer..
  • Choose the Right Size: How to choose the right size of slides for your drawer? Install distance (each side): 0.76"/19.5 mm. Please measure the length of the drawer without the frame board at first. The length of slides should be less....
Check Stock

Extreme Tools TX362505RBBK Tx Series Reinforced 5-Drawer Extra Capacity Road Box with Friction Slides, 36-Inch, Wrinkle Black Powder Coat Finish

  • 5 big drawers: 2 deep and 3 standard size drawers.
  • Top Till area under the lid provides additional storage.
  • 1"X1" square tubing frame forms rigid protection.
  • Weather-resistant features: drip trough channels water away so it cannot get in tool box.
  • Full-extension friction slides allow drawers to hold up to 150 lbs per drawer.
Check Stock

OCG Undermount Drawer Slides 21 inch (1 Pair), Full Extension Soft Close Concealed Drawer Runners, Come W/ Mounting Screws and Brackets, 1 Pair

  • SOFT CLOSE AND FULL EXTENSION: Full extension opening allows for the entire drawer to be accessed. The concealed drawer slides are rated for heavy-duty use (loads up to 75 lbs), featuring soft-close functionality to ensure the drawer close softly and silently..
  • DURABLE AND COMPATIBLE: Made from high-grade Galvanized steel, Intended for use with Face Frame or Frameless Cabinets. Soft close bottom mount drawer slides are compatible with most major drawer and cabinet types (undermount) and are ideal for new construction, remodeling and replacement projects..
  • PACKAGE INCLUDE: OCG Under mount drawer slides 21 inch, adjustable locking device, rear mounting brackets, mounting screws, installation instructions..
  • PRODUCT SPECIFICATIONS: Drawer Length: 533mm(21"), Cabinet Depth Range: about 569mm(22-3/8"), please choose 21" slides..
  • PREMIUM SERVICE: Please choose the right size before you purchase. For our customers, OCG product comes with Lifelong Technical Support & Premium Service. If you have any issues about the slides, please contact us first, we will give you the sa....
Check Stock

DEWALT 2-Shelf Industrial 4-Foot Storage Rack Work Station Kit (DXST3000WB)

  • LARGE CAPACITY - Industrial wire grid and composite deck can each support 1,500 lb. for a total 3,000 lb. capacity.
  • POWDER-COATED STEEL - Industrial powder-coated finish on the steel uprights, support straps, and crossbeams won't fade or chip.
  • STORAGE DRAWER - Measuring 6" tall x 42" wide x 16.5" deep, drawer has ball bearing slides and a 120-pound capacity.
  • STEEL PEGBOARD - Steel pegboard panel mounts between uprights or on vertical supports and features 1-inch on center spacing.
  • INCLUDED TOOL HANGERS - Kit includes 6 various pegboard tool hangers to let you store the tools you need within easy reach.
Check Stock

Knape & Vogt 1175P ZC 22 22-5/8" Zinc Single Track Drawer Slide

  • Designed for use on box or file drawer applications up to 24" wide.
  • Features a push-in lever release for easy drawer removal.
  • Includes 1 pair of drawer slides and mounting hardware.
Check Stock

Soft Close Drawer Slides 20 Inch (5 Pairs), OCG Full Extension Ball Bearing Side Mount Drawer Slides for Frameless Cabinets

  • SMOOTH AND QUIET : Double row steel ball bearing action slides that ensure smooth and quiet performance. Featuring soft-close functionality to close any drawer softly and silently, creating a silent life environment for your family..
  • EASY TO INSTALL : 5 Pairs of low noise drawer slides 20 Inch, including mounting screws and detailed instructions which make installation easier..
  • HIGH STRENGTH AND RUST RESISTANCE : The heavy duty cabinet drawer slides made from high-grade cold rolled steel with zinc plated, ensuring quality and longevity. Rated for heavy-duty use (loads up to 100 lbs)..
  • FULL EXTENSION : Side Mount Ball-bearing Drawer Slides, Full extension opening allows for the entire drawer to be accessed..
  • PREMIUM SERVICE : Please choose the right size before you purchase. For our customers, OCG drawer runners comes with Lifelong Technical Support & Premium Service. If you have any issues about the slides, please contact us first, we will give you the satisfied solution as soon as possible..
Check Stock

ABN Tool Drawer Liner Non Slip Tool Box Liner - Bulk Rubber Shelf Liner Roll Black Shelf Liner Non Adhesive, 16in x 16ft

  • [Keep Your Tools Protected & Neat] The ABN 16 Inch x 16 Foot Non Slip Drawer Liner Tool Box Drawer Mat Liner in Black is a drawer rubber liner that prevents your expensive tools from scratching and clashing in vulnerable environments.
  • Stop digging around mismatched sockets and wrenches and find your tools where you place them on this shelf grip liner.
  • [Install Anywhere] Black color to match your cabinet, kitchen drawer, utility room wire shelf, pantry shelving, or truck toolbox.
  • Use as a tool cabinet liner, tool box foam rubber liner, kitchen drawer liners non slip drawer mat, truck tool box mat, cupboard liner black drawer liner, and more – You can even place your shoes on these toolbox foam liners for shelves as you enter the house during winter months.
  • Washable for easy cleanup and repeated use.
  • [Use Your Heaviest Tools] Approximate 1/8-inch (3mm) heavy thickness for maximum strength and longevity that withstands your toughest and heaviest tools so you never need to worry about breaking or tearing your rubber drawer liners.
  • Place any size tools and parts in an orderly fashion to attractively organize your drawers and eliminate the annoying metal-on-metal noise when tools are dropped in.
  • [Customize Your Fit] 16-inch x 16-foot (40.6cm ....
Check Stock

ABN Tool Drawer Liner Non Slip Tool Box Liner - Bulk Rubber Shelf Liner Roll Black Shelf Liner Non Adhesive, 16in x 6ft

  • [Keep Your Tools Protected & Neat] The ABN 16 Inch x 6 Foot Non Slip Drawer Liner Tool Box Drawer Mat Liner in Black is a drawer rubber liner that prevents your expensive tools from scratching and clashing in vulnerable environments.
  • No longer dig around mismatched sockets and wrenches since where you place them on this shelf grip liner is where they stay.
  • [Install Anywhere] Black color to match your cabinet, kitchen drawer, utility room wire shelf, pantry shelving, or truck toolbox.
  • Use as a tool cabinet liner, tool box foam rubber liner, kitchen drawer liners non slip drawer mat, truck tool box mat, cupboard liner black drawer liner, and more – You can even place your shoes on this toolbox foam liners for shelves as you enter the house during winter months.
  • Washable for easy cleanup and repeated use.
  • [Use Your Heaviest Tools] Approximate 1/8-inch (3mm) heavy thickness for maximum strength and longevity that withstands your toughest and heaviest tools so you never again need to worry about breaking or tearing your rubber drawer liners.
  • Place any size tools and parts from small to large to attractively organize your drawers and eliminate the annoying metal-on-metal noise when tools are dropped in.
Check Stock

DECKED Truck Tool Box Full Depth With Ladder

  • ...UCK COMPATABILITY: The DECKED Tool Box is compatible with all full-size trucks manufactured from 2001-current. DECKED Tool Box is most likely compatible with full-size trucks older than 2000 if the bed width is between 61"-70.5" inside bedrail to inside bedrail. The DECKED Tool Box is NOT COMPATIBLE with the DECKED Drawer System for any short 5'6" or standard 6'6" bed-length trucks. It is compatible with only select 8' Drawer System integrations..
  • INDUSTRIAL STRENGTH DURABILITY AND SECURITY: The DECKED Tool Box features industrial strength, durability and security. The Tool Box won't ding, dent or rust and is constructed with high impact, injection molded polymer resin with a robust locking system and steel reinforced lid to provide bombproof protection..
  • WATERPROOF STORAGE: The DECKED Tool Box features bone dry storage, watertight construction thanks to a seamless molded design and integrated EPDM gasket and lid channel. The Tool Box is made of anti-corrosoin steel and aluminum hardware for long-lasting durability, making it impervious to the environment..
  • 73.4 GALLON STORAGE CAPACITY: The DECKED Tool Box features 73.4 gallons of storage capacity for all of your tools and gear. It is easily accessible for glove-friendly entry with overbuilt, hand-sized....
Check Stock

6 Pairs of 21” Full Extension Undermount Concealed Soft Close Drawer Slides, with Locking Devices, Metal Back Brackets, and Screws

  • Mounting Hardware Includes: Six Left and Six Right Soft Close slides, Twelve Metal Back Brackets, Twelve Locking Devices, and Screws.
  • Recommended use for on 24" Deep Cabinets.
  • Comes with six way adjustment on front triggers (Up, Down, Front, Back, Left, Right), no rear adjustment.
  • Undermount soft close drawer slides are intended for use with face frame and frameless cabinets and up to 5/8 inch drawer box material.
Check Stock