Best Torsion Damper

8MILELAKE Heavy Duty Drop Forged Torsion Bar Unloading Tool Key Removal Compatible for GM Chevy Ford Dodge

  • Forged steel construction: made for use on trucks with heavy duty chassis and a larger torsion bar.
  • Work in safety: designed to hold the torsion bar while you make adjustments to your vehicle.
  • DOES NOT FIT 2011+ Chevy / GMC 2500 / 3500 models, fits: 1988 to 2003 GMC and Chevrolet 1/2 (1500), 3/4 (2500) and 1-ton (3500) pickups, 1991 to 2001 Oldsmobile Bravada, the S-10 Blazer and S-15 Jimmy 4WD pickups with 4.3L V-6 engines Plus More. Does NOT fit the 2011+ HD models..
  • Larger threads: 7/8 inch diameter threads.
  • Large C-frame opening: to accommodate beefier torsion bars..
Check Stock

Broan 8" Universal Automatic Make-Up Air Damper with Pressure Sensor Kit

  • 8″ Universal Automatic Make-Up Air Damper with Pressure Sensor Kit.
  • Interlocked make-up air damper systems meet IRC Code requirements for make-up air with range hoods over 400 CFM.
  • Interlocked make-up air systems avoid wasted energy associated with barometric solutions and do not let unwanted air into the home during heating or cooling activities so air pressure is equalized for a well-balanced environment.
  • Fresh air wall caps are required for use with Make-Up Air Dampers.
  • Interlocked make-up air dampers provide outside air when required to keep the air in the home fresher by allowing the range hood to operate at optimum levels.
  • Balance indoor air pressure by providing interlocked make-up air without requiring a direct wire connection between the range hood and the damper.
  • Instead a sensor is attached to the exhaust duct to detect if the range hood is operating.
  • Slave dampers (MD6S, MD8S or MD10S) are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation..
Check Stock

Backdraft Exhaust Damper Seal 4 Inch by Calimaero One Size Fits All 4 Duct Backdraft Damper Gravity Powered Made in Germany 4 Inch HVAC Damper Dryer Vent Valve Keep Cold Air Out

  • PRODUCT FEATURES This 4inch damper vent air blocker does what it is designed to do. It prevents outside air from entering back into your house via dryer, bathroom fan, and grow tent. You will be very pleased with the quality, functionality, value, and ease of installation of this product..
  • EASY INSTALLATION The 4 inch backflow preventer is easy to install. You will only cram these in the 4" duct and the rubber flap will seal off drafts coming in from your dryer vent or bathroom exhaust fan. Make sure the flaps open away from the ventilator. The outer rubber ring creates a seal around the strong plastic body giving you the perfect vent damper..
  • FLEXIBLE This backdraft damper's main recycled plastic part is small enough to fit into almost all PVC, metal, and other ducts with 4 inch size. No need to buy multiple products to find the one that works. Purchase with ease and relax in your draft free living space..
  • CONVENIENT This 4 inline damper duct valve gummi flaps are easy to open for almost all dryers or booster fans. The lack of moving spring will ensure a long lifespan that will save you time and money. As the product ....
Check Stock

Pair of 2' Garage Door Torsion Springs Set with Non-Slip Winding Bars & Gloves, High Quality Precision Electrophoresis Black Coated, for Replacement & Installation, MIN 16,000 Cycles (0.218x2''x24'')

  • DIMENSION : One Pair of 218” wire size x 2” inside dimension x 24” length Garage Door Torsion Spring. (left & right).
  • PACKING INCLUDED : A pair of Garage Door Torsion Spring, A pair of 17.2’’ Non-Slip Winding Bars and Gloves, and Installation Instructions are included in the package, so you can start installing immediately after receiving the product..
  • HIGH QUALITY : Made of heat-treated professional spring steel coils with aluminum cones to make sure they are extremely heavy duty. The latest electrophoretic coating technology provide excellent corrosion proof performance and superior abrasion proof performance. Salt spray tests up to 300 Hours, and Minimum 16,000 Cycles. NEVER need to lubricate the spring, keep hands clean during installation..
  • SIMPLE INSTALLATION : Use KaiMinDogz high quality garage door torsion springs to replace old broken garage door springs.Having the experience of installing torsion springs can save you a lot of money..
  • IMPORTANT : Please make sure that the wire diameter, inner diameter, and length of the spring you choose are exactly the same as the original spring used. The extra time should prove beneficial. Over the years we have discovered that informed customers are happier..
Check Stock

Draft Blocker 6 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector 6 Inch

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring....
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC....
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal....
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from....
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are....
Check Stock

PUMA Safety Touring Grey Low ASTM EH Size 11

  • COMPOSITE TOE CAP: The fiberglass reinforced composite toe cap offers more space for the toes, is lighter than a common steel cap, antimagnetic and thermally insulating. These safety shoes meet or exceed the highest ASTM standards for toe impact I/75 and compression C/75 protection (ASTM F2413-18 and ASTM F2412-18a).
  • GRIP & STABILITY: The slip resistant, cushioning Dual Density Poly-Urethane sole is pure motorsport. As with a tire tread, fluids are drained and grip is optimized on every surface. The MTSP Torsion Control element provides additional stability..
  • TORSION CONTROL: The extra long and distinctive MTSP torsion control element increases the stability over the entire foot. It ensures an active drive and dynamic running movement..
  • DRIVERS HEEL: The rounded and raised outsole in the heel area, inspired by motorsport, supports the natural rolling movement of the foot and protects against heavy abrasion, especially when driving a car or truck..
  • ADDITIONAL FEATURES: Water resistant, non-metallic, internal lacing without protruding elements for a particularly slim design..
Check Stock

PUMA Safety Touring Grey Low ASTM EH Size 10,5

  • COMPOSITE TOE CAP: The fiberglass reinforced composite toe cap offers more space for the toes, is lighter than a common steel cap, antimagnetic and thermally insulating. These safety shoes meet or exceed the highest ASTM standards for toe impact I/75 and compression C/75 protection (ASTM F2413-18 and ASTM F2412-18a).
  • GRIP & STABILITY: The slip resistant, cushioning Dual Density Poly-Urethane sole is pure motorsport. As with a tire tread, fluids are drained and grip is optimized on every surface. The MTSP Torsion Control element provides additional stability..
  • TORSION CONTROL: The extra long and distinctive MTSP torsion control element increases the stability over the entire foot. It ensures an active drive and dynamic running movement..
  • DRIVERS HEEL: The rounded and raised outsole in the heel area, inspired by motorsport, supports the natural rolling movement of the foot and protects against heavy abrasion, especially when driving a car or truck..
  • ADDITIONAL FEATURES: Water resistant, non-metallic, internal lacing without protruding elements for a particularly slim design..
Check Stock

Holster for 1911 (4.25'-5') .45acp - IWB Holster for Concealed Carry / Custom fit to Your Gun - Bravo Concealment-

  • ✔ TORSION TECHNOLOGY: The Torsion gun holster is the epitome of technology and comfort brought together for the ultimate in concealed carry. Its patented Torsion Technology allows your gun to sit closer to the body when compared to our competitors holsters. This is done by integrating a 10 degree inward cant inside the holster for a closer and comfortable fit for “all day” carry..
  • ✔ADJUSTABLE RETENTION: This 1911 Gun Holster has a retention setting phillips screw for your desired retention. So whether you like full retention or more on the lighter side, rest assured that you will have the ability to choose what works best for you..
  • ✔ ADJUSTABLE CANT, RIDE HEIGHT: Cant and ride height can be adjusted to your desired configuration by simply moving our proprietary belt clips up or down to different positions..
  • ✔ TUCKABLE IWB HOLSTER: The IWB Torsion Holster allows you to tuck In your shirt over the gun holster for a formal way to carry. You can achieve this by converting your gun holster Into the Single Belt Clip configuration. Simply remove the small belt clip located on the firearms (slide side), and leave the longer (trigger guard side) belt clip..
  • ✔ UNLIMITED LIFETIME WARRANTY ✔30 DAY MONEY BACK GUARANTEE: Bravo Concealment offers high q....
Check Stock

WULF 1-3' Front 1.5-2' Rear Adj Leveling Lift Kit with Extended WULF Shocks compatible with 1998-2011 Ford Ranger 4X4 with Torsion Bar Suspension

  • Compatible with 1998-2011 Ford Ranger 4X4 with Torsion Bar Suspension.
  • FRONT: 1-3" Adjustable Lift Steel Torsion Keys, (2) WULF Stealth Nitro Gas Shock Absorbers, FREE Red Shock Dust Boots Included, Hardware Included.
  • REAR: 1.5-2" Adjustable Lift Black Powder Coated Shackles, Zerk-Grease Fittings, Pressed greaseable high grade poly bushings and metal sleeves included, (2) WULF Stealth Nitro Gas Shock Absorbers, FREE Red Shock Dust Boots Included, Hardware Included.
  • NOTE: TORSION BAR SUSPENSION MODELS ONLY Please see the description for full details, or contact us for assistance.
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.
Check Stock

Holster for Glock™ 43X, 43 - IWB Holster for Concealed Carry / Custom fit to Your Gun - Bravo Concealment

  • ✔ FITS GUN MODELS: Glock 43X, Glock 43.
  • ✔ TORSION TECHNOLOGY: The Torsion gun holster is the epitome of technology and comfort brought together for the ultimate in concealed carry. Its patented Torsion Technology allows your gun to sit closer to the body when compared to our competitors holsters. This is done by integrating a 10 degree inward cant inside the holster for a closer and comfortable fit for “all day” carry..
  • ✔ADJUSTABLE RETENTION: This Glock 43X Gun Holster has a retention setting phillips screw for your desired retention. So whether you like full retention or more on the lighter side, rest assured that you will have the ability to choose what works best for you..
  • ✔ ADJUSTABLE CANT, RIDE HEIGHT: Cant and ride height can be adjusted to your desired configuration by simply moving our proprietary belt clips up or down to different positions..
  • ✔TUCKABLE IWB HOLSTER: The IWB Torsion Holster allows you to tuck In your shirt over the gun holster for a formal way to carry. You can achieve this by converting your gun holster Into the Single Belt Clip configuration. Simply remove the small belt clip located on the firearms (slide side), and leave the longer (trigger guard side) belt clip..
  • ✔UNLIMITED LIFETIME WARRANTY ✔30 DAY MONEY BAC....
Check Stock