Partsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V
...ese oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
can be function as marker light, clearance lights, turn signal lights.
fits in a combo-style hole and Chrome bezel hides mounting screws.
sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a popular choice for areas with little space to install grommet-mount lights.
Wiring and Warranty: black is ground, red is high brightness and yellow is low brightness.
we truly offer 1 year warranty for this truck trailer lights. Any ....
x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
As every truck lamp come with two wires, they can only use as one function a time.
free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
5.These are Waterproof, not submersible. Please do not use it under water.
2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
Tips and Warranty: 1. These led lights are not dimmable.
The indicator light is hardwired with 2 wires and can be used as constant on trailer light....
Partsam 8Pcs 2.5" Mini Oval Amber Marker Clearance LED Lights 2 Diodes, Sealed Oval Led Side Fender Marker Truck Trailer Lights Universal Rectangular Rectangle Led Lights Amber Lights
Partsam includes 8 Pieces 12v DC 2.5 inch amber oval led Marker Lights.
These Rectangle Waterproof LED trailer lights serves as either a side marker lights or clearance lights when properly mounted. Surface mount to trailer with 2 wire pigtails each. Screws are not included.
These Mini rectangular led lights are universal. Generally people use them as clearance lights, side marker lights, identification lights or led courtesy lights. We also get feedbacks from our customers using them as strobe lights by connect with the switch or relay. Also some put them on motorhome as position lights, or install them in the truck step running boards as side markers etc..
Size and Brightness: 2.54" x 1.06" x 0.7" and the center to center hole distance: 1.8".
80 lumen each light with 2 pcs High Quality LED Diodes. Surface Mount with two free end wires: Black is hot and White is ground, and the wires come out of the back of the light. So if you use it as turn signal lights by connecting a on/off switch, it may not be that bright.
These surface mount led lights have 2 holes one in each. Because of the placement of the leads and how the amber lights is mounted, You will need to drill holes for the screws AND for the wire leads to surface. The screw actually hold both ....
Smoked Amber LED Front Grille Marker Lights Kit, 4Pcs 4 Inch Amber Full LED Center Grille Running/Position Lights Sealed 9 LEDs Compatible With Tacoma/4Runner/ Tundra/Silverado Grill Marker Lights
Each 4 inch grille marker light include 9 pieces SMD chips and bright you super bright power. SMOKE LENS give your truck a great new look, just looks like it comes that way from trucks.
Of curse these 4 inch amber led strip can be use other vehicles such as trailer rv bus etc. Many customers use them on trailer as trailer marker lights.
Installation: this 4 inch led utility strip bar is hardwired with 2 wires, black is ground, red positive.
Some wire them to the DRL's constant wire so they'd come on when lights come on, some wire them into an Aux switch along with the Fog Lights, some connect to the head light fuse so that the amber strip light on when turn headlights on, also some use double sided tapes to mount the amber lights bar to the hood, instead of mounting to the grill. Really a DIY retrofit set.
Warranty: We will offer 1 YEAR WARRANTY for this smoked amber grill lights kit since you place the order. Please feel free to send us email if there's any issue before or after purchase and we will reply in 24 hours.
Partsam 5pcs 2" Amber Round Sealed Clearance Side Marker Light 4 LED Mount Grommet/Pigtails for Trailer Truck Camper RV
Partsam (5 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens.
Kit includes grommets and pigtails for complete installation.
Sonically sealed, waterproof housing and lens unit is submersible.
Round trailer light serves as either a side marker light or a clearance light.
LEDs make great replacements for incandescent lights.
2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.75in.(W/ Grommet).
Recessed mount with included black grommet, Installation requires a 2-5/16" hole at desired location and Includes industry-standard 2- prong plug with pigtail.
Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
BJZ LED Trailer Marker Lights Amber 6 Led Side Marker Clearance Light Bar 12V 3.8" Front Rear Signal Indicator Smoked Light Strip Waterproof for Trailer Truck Van Pickup ATV UTV RV, 10Pcs
...h PC smoked lens, built-in 6 high-brightness LEDs, with ABS black base. Waterproof: IP67.
✔【Wide Application of LED Marker Lights】Fit for LED marker lights, side marker lights, trailer marker lights, clearance lights, indicator lights, tail lights, running lights, turn signal lights, brake lights, parking lights, grille lights, decorative lights, fog lights, undeglow lights and more..
✔【Applicable Models of LED Side Lights】Suitable for Truck, Trailer, Pickup, ATV, UTV, RV, SUV, Van, Offroad, Golf Cart, Bus, Motorcycle, Snowmobile, F350, F450, Lorry, Camper, etc..
✔【High quality Clearance Lights】External reinforced PC lens and scratch resistant ABS base with high brightness SMD LED wick inside. IP67 sealed waterproof, dustproof, shockproof, durable, and not easy to fade after long-term exposure. LED lights can output high-brightness light with very low power consumption, improving your safety when driving at night..
✔【Easy to Install】Surface mount, mounting hole distance is 3.34 inches (85mm). 2-wire connection: Red is Positive, Black is Negative. Each marker light comes with a free screw set and fo....
This 2.5″ round LED lights are a popular choice for nearly every light panel for your trucks.
Amber 2.5″ round 13 diode LED marker/clearance light.
commonly found on air cleaner light bars, cab and sleeper kits, bumpers, rear center panels, and all sorts of other places.
small size with 13 Diodes brings you powerful brightness & make them a popular choice for drivers with limited space but a desire to be seen.
Partsam 10Pack, Sealed, Stripe Shape, 2.5″ Round, LED Trailer Side Marker, Clearance or ID Light, 13 Diodes, Amber Lens, Great replacement for incandescent lights.
Partsam RED Amber LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Front Rear - Clear Set, Trailer Fender Lights, Trailer Fender Clearance Lights Assembly with Bracket Trailers Over 80" Wide
Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
Pre-wired assembly mounts on top or side of fender.
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
Amber LED light points toward front of trailer to act as front clearance light.
Red LED light faces rearward to act as rear clearance light.
2-Wire design - includes ground wire and lead wire for power.
Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer.
LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Partsam 20Pcs 2\ x 4\ Double Bullseye Led Marker Lights 10 diodes Surface Mount Sealed Rectangle Rectangular Led Trailer Marker Clearance Lights Waterproof 12V
Package includes 20 Pieces double bullseye led marker lights (10 Amber lights + 10 Red lights). Each trailer marker light includes 2 pieces stainless steel screws for surface mounting.
Each led markers boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamp, sonically sealed polycarbonate lens and weatherproof housing.
About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1".
The rectangular led light features a replaceable, snap-on lens. The white base surface mounts on standard 3" centers, and the two-wire design includes the lead and ground wires to mount to any surface: black is ground and red is positive.
This double bullseye LED light can be used as a clearance or marker light.
These LED marker lights have the "double bullseye" design just like the marker / clearance lights on Airstreams from 1969 and many later models.
These trailer lights go by a few different names - tiger eye led lights and double bubble led lights are the most common ones that we hear. This is a nice-sized side marker light for anywhere on the truck.
Different form many bullseye lights selling on the market, The wires do not exit from the middle but form the corner.
CZC AUTO LED Amber Side Marker Lights Sealed Submersible LED Clearance Reflector Lamps Waterproof Trailer Running Lights for 12V Boat Trailer Truck Marine RV (2 pack)
WIDE USAGE: The kit includes 2 side marker lamps and 4 mounting screws, can be widely used as side marker lights, clearance lamps, reflector ligths and also replacement for trailer running light. Each light has 4 LED, 2 more than normal similar lights. Brighter & Safer..
SUBMERSIBLE: The side marker lights adopt ABS housing and PMMA lens, with sonic sealed for submersible. Waterproof rate IP68..
FITMENT TYPE: CZC AUTO amber side clearance lights is very suitable for marine boat trailer truck RV and all 12V vehicles..
EASY TO INSTALL: 2 copper wires connection, yellow one for positive "+" and black one for negative "-". Each side reflector light is fixed by 2 mounting screws, with mounting distance 3-3/8"..
CLIENT SUPPORT: 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..
