Best Trailer Axle Kit

LIBRA Trailer Leaf Spring 5 Leaf Slipper 3500# Capacity for 7000# 7K Axle -Set 2

3,500lbs capacity per each spring , for standard 7,000lbs trailer axle.
Free length from center of eye to end of hook: 26-7/8", Free open: 3.19", width of leaf: 2", 5 leaves, 9/16" bushing dia.
It will replace 72-32 / 1203T3 / LIB-501-SH / UNA232 / 125023 / 9150000 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

3,000lbs capacity per each spring, for standard 5,200-6,000lbs trailer axle.
Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 5 leaves, 9/16" bushing dia.
It will replace SW5 / LIB-502-DE / UNA111 / PR5 / 9150018 / 93163 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

【WITH EXTRA 2 DUST CAPS & 4 SEALS】- Fits 3500lbs Trailer 1-1/16'' to 1-3/8'' Axles, Spindle #84, EZ-Lube Axle. You will receive 2 sets of 5x4.5'' trailer hubs and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 2pcs dust caps & 4pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!.
【SIZE & COMPATIBLE WITH】- Trailer axle dust cap (O.D: 1.98''), L44649 outer bearings (I.D: 1-1/16''), L68149 inner bearings (I.D: 1-3/8''), Grease seals (2.56" O.D - 1.72" I.D), Lug nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer..
【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed..
【HEAVY DUTY & ANTI-RUST】- These hardware are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating,....

Suit for: Unpower design axle for 1:14 Tamiya RC Car.
This 133.5mm rear axle can be mounted on Tamiya container, tank trailer and flatbed trailer without affecting the original size and width..
Install the 155mm rear axle, the wheelbase will be wider by about 12mm..
Install the 182mm rear axle, the wheelbase will be wider by about 25mm..

LOOKING FOR THE BEST LEVELING BLOCKS FOR CAMPERS LEVEL YOUR CAMPER, RV, OR TRAILER IN 5 MINUTES OR LESS WITH THE BEST LEVELER KIT ON THE MARKET.
Are you ready to experience the BEST levelers for your RV Level your camper, RV, or Trailer on the FIRST TRY by simply driving on until level.
Nothing is easier to use than the innovative Andersen Hitches Camper Leveler Kit.
You'll literally be ready to roast hot dogs, s'mores, or head out to go hiking or fishing in 5 minutes or less.
YOU ONLY NEED ONE LEVELER PER AXLE ON ONE SIDE OF THE TRAILER.
With the Andersen Camper Leveler, you don't need to level both sides of the trailer - only put them on the low side.
ARE YOU READY TO GET STARTED ENJOYING YOUR FIRST DAY OF CAMP INSTEAD OF STRUGGLING THROUGH SET-UP SIMPLY CLICK THE YELLOW ADD TO CART BUTTON AND CHECKOUT NOW.
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle.
Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

DRUM KITS - M-Parts Trailer Drum Kits 5 on 5.5' for 3,500 lbs Axle.
BOLT PATTERN - 5 on 5.5' bolt pattern brake drum with 1/2'-20 studs and bearing races installed.
HARDWARE - Lug nuts (1/2'-20)/ Cotter Pin, L-68149 inner bearing- (1-3/8 inch inside dimension) / L-44649 outer bearing- (1-1/16 inch inside dimension), Grease seal - (56 inch O.D - 1.72 inch I.D)/ EZ Lube Dust cap - (1.98 inch outside dimension).
M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.

Features: | Engineer Approved & Stamped Full Sized 24" x 36" Blueprints | Suitable for High School Shop & Ag Classes, Industry, & Do-it-yourselfers | Detailed Cut List w/ Full Bill of Materials & Welding Tips | Tailored TK Trailer Kit to ensure all the right parts for the plan all packaged up for your convenience. | This plan is specifically made for ( | SOLD SEPARATELY): | TK Trailer Kit - Master Plan 1218 - 8' x 18' Tandem Axle 7K or 10.4K Util.

3,500 lbs Idler Trailer Axle (Capacity 3.5K).
Internal Wiring System To ensure seamless design Protect brake wires from wear and tear.
Replaces TK Trailer Parts, AL-KO, Hayes, and Lippert Axles.
Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs.
High Strength Straight Steel Axle Tube Construction to ensureA better highway experience.