Best Trailer Brake Parts

Southwest Wheel 5,200 lbs Trailer Axle Self Adjusting Electric Brake Kit

  • Pair of TruRyde 12" x 2" 6-5.5" bolt circle hub and drums 25580 inner bearing 15123 outer bearing.
  • Pair of TruRyde 12" x 2" self adjusting electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
  • Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
  • Built for 42 spindles with a 5 hole brake flange.
Check Stock

Trailer Light Led, Boat Trailer Light Kit, IP68 Waterproof Led Trailer Lights, Combo Stop Turn Running Brake License Plate Lights for Trailers, Truck, Boat etc

  • Multifunction Trailer Lights: This combination trailer tail lights work as stop, turning, brake, tail, rear reflector, reflector and side marker light..
  • Submersible Rectangular Trailer Lights: With IP68 Waterproof rating, makes it ideal for the trailers submerged, like boat trailer..
  • Fully Compliant with DOT: Construct with super bright LED lights and 100% sealed circuit board to ensure high visibility, even inclement weather, provide safe driving..
  • Wire Tips: Left Side: White Wire: Ground.
  • White+Yellow: High Brightness, used as Brake Light.
  • White+Brown: Low Brightness, used as Running Light/Left License Plate Lamp.
  • White+Green, : High Brightness, used as Brake Light.
  • White+Brown: Low Brightness, used as Running Light..
  • Wide Application: The trailer lights are perfect for boat truck trailer under and over 80 inch width. Can be widely used on truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc..
Check Stock

Tekonsha 8507120 Brakeman IV, Time-Delay Brake Controller For Trailers with 1-4 Axles, Black

  • TIME-DELAYED DIGITAL BRAKE CONTROLLER: Applies braking power that ramps up, or increases over a period of time, at a fixed rate. This makes the Tekonsha Brakeman IV brake controller ideal for basic, light-duty towing needs.
  • EASILY INSTALL: The Brakeman IV trailer brake controller has a Plug & Play port for easy installation. As a time-based controller with a compact design, the unit can be installed above or below the dash, in any direction, as it is within reach of the driver.
  • EASY-TO-READ INDICATOR: Digital display shows settings, real-time comprehensive diagnostics, and short circuit protection. Red light means power increase to trailer brakes. Green light means secure connection with trailer “.
  • MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The Brakeman IV will apply power to your trailer’s brakes up to the amount of power previously set.
  • VERSATILE: The Brakeman IV digital brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and more with 2, 4, 6, and 8 brakes (1-4 axles). Vehicle-specific Tekonsha Plug & Play brake controller wiring harness sold separately.
Check Stock

Redarc Tow-Pro Elite Electric Brake Controller

  • The award winning REDARC Tow-Pr is the first of its kind to offer two types of braking in the one unit. The Tow-Pro Elite electric brake controller uses both proportional and user-controlled mode, and features Active Calibration..
  • With proportional mode inertia sensing for highway commutes, you can ensure your electric trailer brake controller will initiate safe, controlled braking when the time arises..
  • The REDARC Tow-Pro Electric Brake Controllers are designed to suit most common trailer braking applications. Our sleek innovative designs also require minimal dash space and are simple to install and operate..
  • Additionally, the REDARC Tow-Pro Classic Electric Brake Controller offers a single user-controlled mode of trailer braking. Simply adjust the required force your towed vehicle requires with the turn of a control knob when ever needed..
Check Stock

Trailer Brake Controller Module Trailer Brake Controller Module Fits For 15 thru 20 For F-150 For Parts In-Dash Trailer Brake Controller Module Front OE JL3Z-2C006-AA

  • FITMENT: This is compatible with 15 thru 20 for F-150 OEM Genuine For Parts In-Dash Trailer Brake Controller Module.
  • HIGH QUALITY: Made of high-quality durable materials for long operating life excellent performance, and comfortable touch feeling. Plug and play, easy installation..
  • PACKING INCLUDED:1* Trailer Brake Controller Module(NOTE:Even if the model and year of your car are the same, please check the number of pins and original switch appearance before purchasing. ).
  • FUNCTION: Designed to replace the faulty and broken power window switch on your vehicle, so that your car can restore good performance..
Check Stock

Super MUTT Base Model Diagnostic Trailer Tester IPA 9008-SE

  • The award winning REDARC Tow-Pr is the first of its kind to offer two types of braking in the one unit. The Tow-Pro Elite electric brake controller uses both proportional and user-controlled mode, and features Active Calibration..
  • With proportional mode inertia sensing for highway commutes, you can ensure your electric trailer brake controller will initiate safe, controlled braking when the time arises..
  • The REDARC Tow-Pro Electric Brake Controllers are designed to suit most common trailer braking applications. Our sleek innovative designs also require minimal dash space and are simple to install and operate..
  • Additionally, the REDARC Tow-Pro Classic Electric Brake Controller offers a single user-controlled mode of trailer braking. Simply adjust the required force your towed vehicle requires with the turn of a control knob when ever needed..
Check Stock

Southwest Wheel New 2-Pack 12 X 2 TruRyde Trailer Electric Brake Assembly 2 Right + 2 Left

  • 2-Pack (2LH & 2RH) of 12" x 2" TruRyde electric brake assemblies with parts.
  • 5 Hole Mounting. Comes with mounting bolts, nuts, and lock washers.
  • Works with 5,200 lbs., 6,000 lbs., and 7,000 lbs. Al-Ko, Dexter, Lippert and Quality Trailer Axles.
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
Check Stock

Southwest Wheel 3,500 lbs Trailer Axle Self Adjusting Electric Brake Kit 5-4.5 Bolt Circle

  • Pair of TruRyde 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud).
  • Pair of TruRyde 10" x 2 1/4" self adjusting TruRyde electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles.
  • Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
  • Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649).
Check Stock

CheeMuii 7 Way Trailer Cord and 7 Gang Junction Box Kit with 12V Breakaway Switch and Plug Holder Heavy Duty 8 FT Cable Wiring Harness Kit for Trailers RVs Campers

  • 【JUNCTION BOX】- The junction box is equipped with 7 color-coded terminals and wires, which can easily identify the corresponding functions of the wires and facilitate wiring. Strong junction boxes are waterproof and dust resistant to increase the service life of trailer cords..
  • 【PURE COPPER POWER CORD】- The 7-way trailer cord is made of high-quality pure copper and has a long service life. And has excellent electrical and thermal conductivity, to ensure the normal use of car lights in the process of driving (such as turn signal and brake lights, etc.)..
  • 【BREAKAWAY SWITCH】- This 12V trailer breakaway switch provides safer traction by connecting the trailer's breakaway battery and trailer brake. If the trailer is disconnected while being towed, the cable will release and the brakes will be activated..
  • 【DETAILED WIRING INSTRUCTION】- CheeMuii trailer cords use 7 color-coded wires, and the color code adopted is suitable for most RV trailer wiring standards, but as there are some differences between trailer manufacturers, we have updated the detailed instructions, please read them carefully before use. Please refer to the wiring instructions and connect cables according to the color and function of the wires to avoid errors..
Check Stock

Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty

  • ... diodes feature a circular pearl-like reflector for clearer light, improved visibility and a safer night for you..
  • Easy Installation: Standard 6" size. Black wire for Negative, White wire for Brake Light and Red wire for Tail/Running Light. Mark and drill holes according to the size of the base provided, and fix the trailer lighting with screws after connecting the wires. The mounting hole size is: 7” (175 mm) x 2.7” (68 mm).
  • Premium Material: This oval trailer lights is made of high-quality ABS shell and PC lens to ensure long-lasting durability. Compared with other household rubber installations, we use screws to install more sturdy, effectively protecting the entire led trailer tail lights. Anti-vibration and dust-proof not easy to fall off..
  • Waterproof & Durable: IP67 waterproof trailer tail light, capable to withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles..
  • Multi Functional Trailer Light: 6 led trailer brake lights Suitable for most vehicles equipped with DC 12V for all kinds of trucks, trailers, tractors, boat, bus, lorry, van, caravan, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc..
Check Stock