Nilight - TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Trailer Tail Lights 2 Inch Round Red LED Side Marker Lights w/Grommet Plugs Wire connectors, 2 Years Warranty
Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights.
Red brake lights and flashing orange Direction Indicator lights control by the separate circuit. Red - Brake, Green Right Turn Signal, white - Ground, Yellow - left turn signal and Black - License plate/Running.
4x3.5inch good tail light kit can use on any trailer.
24ft cable to light with a Standard 7 Pin Plug, fit for flat Pin Adapter, then 8ft cable to go across to the the next light. Some trucks, cars, and SUVs are 4-wire systems, this trailer light is not fit for them, please confirm that this trailer light is suitable for the plug socket on your vehicle before ordering..
IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in a....
Partsam 10x Red 2" Round Sealed Clearance Marker Light 4LED Grommet & Pigtails w Reflex Lens, 2 inch round led marker lights, 2 inch round led trailer lights, 2 inch round led lights
Partsam (10 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Red Lens, Reflex Lens.
Kit includes grommets and pigtails for complete installation.
Sonically sealed, waterproof housing and lens unit is submersible.
Round trailer light serves as either a side marker light or a clearance light.
LEDs make great replacements for incandescent lights.
2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.78in.(W/ Grommet).
Recessed mount with included black grommet, Installation requires a 2-5/16" hole at desired location and Includes industry-standard 2- prong plug with pigtail.
Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
CURT 56327 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Ford Transit-150, 250, 350, HD
EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Buick Enclave, Chevrolet Malibu and Chevrolet Traverse.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Chevrolet Express and GMC Savana 1500, 2500, 3500 and 4500.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Chevrolet Traverse, GMC Acadia and Buick Enclave (factory tow package required).
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
CURT 56020 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Ford E-150, E-250, E-350 Super Duty
EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Ford E 150, E 250 and E 350 Super Duty.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
ZXFOOG Rubber Trailer License Plate Bracket-Trailer/Truck License Plate Light Bracket and License Plate Frame Carbon Fiber ,Universal Front Bracket for Boat Trailer with Stainless Steel Plate Screws
【Heavy Rubber Trailer Bracket】: All the hardware included in the kit is shown in the first picture. If the package you receive is missing the relevant hardware, please feel free to contact us for a free replacement.Rubber Trailer License Plate Bracket designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, Prevents loss of trailer/truck license plate. Let the license plate bracket with light last longer.
【Durable Trailer License Plate Bracket】: Black multiply fabric reinforced neoprene rubber license plate bracket for boat trailer,Flexible, durable, corrosion proof, tear proof, fatigue proof, cold temperatures, good UV resistance and long lasting,Replaces flimsy plastic, rigid steel and aluminum holders.
【Carbon Fiber License Plate Frame】: The perfect Match Plate Frame Carbon Fiber (thick plastic license plate frame), matched with 4 carbon fiber plate license plate screws, makes your Trailer / Truck back or front trailer license plate bracket more beautiful.
【Trailer Bracket Easy Installation】: 32PCS stainless steel trailer license plate bracket screws, no need to be purchased by dealers, Rubber Trailer License Plate Bracket can easily mounts to 2" hole pattern on lamp assembly, Standard size for almo....
WoneNice LED Submersible Trailer Tail Light Kit, Combined Stop, Taillights, Turn Function, DOT Compliance, IP67 Waterproof and Fully-Submersible
... tow bar has an estimated 100-hour battery life as turn/tail light 24 hours as brake lights.
BUILT TO LAST: Water-resistant polycarbonate plastic.
Sonically sealed design of this wireless tow bar wireless towing lights blocks water to protect the 2.4Hz wireless connection during rainy or snowy weather.
Each wireless trailer lights LED kit features a 7 blade plug and play transmitter and two temporary wireless tow lights for tow trucks with magnetic bases.
LED TECHNOLOGY: Each lamp features a 2.8 by 5.7-inch (5.8 by 14.5cm) red transparent face plate and 10 LED diodes.
Wireless magnetic tow lights offer an extended life span and high visibility that cannot be matched by traditional trailer lighting.
Water-resistant magnetic wireless tow lights tow light bar passed IP65 moisture test and is SAE, STI, FCC, and DOT compliant for Stop / Tail / Turn (STT) functions.
EASY INSTALLATION: Wireless taillights feature magnetic bases that stick to most metal surfaces to easily be installed on any vehicle, RV, camper, boat trailer, utility trailer, tow truck, or farm equipment.
Plug in the 7 pin transmitter to your 7 way connector and position the wireless LED tow lights.
We suggest attaching zip ties for long distance travels and uneven terrain for increased stabili....
CURT 55243 Vehicle-Side Custom RV Blade 7-Pin Trailer Wiring Harness, Fits Select Ford F-250, F-350, F-450, F-550 Super Duty
EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Nissan Frontier, Pathfinder, Xterra and Suzuki Equator (factory tow package required).
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Smoked Amber LED Front Grille Marker Lights Kit, 4Pcs 4 Inch Amber Full LED Center Grille Running/Position Lights Sealed 9 LEDs Compatible With Tacoma/4Runner/ Tundra/Silverado Grill Marker Lights
Each 4 inch grille marker light include 9 pieces SMD chips and bright you super bright power. SMOKE LENS give your truck a great new look, just looks like it comes that way from trucks.
Of curse these 4 inch amber led strip can be use other vehicles such as trailer rv bus etc. Many customers use them on trailer as trailer marker lights.
Installation: this 4 inch led utility strip bar is hardwired with 2 wires, black is ground, red positive.
Some wire them to the DRL's constant wire so they'd come on when lights come on, some wire them into an Aux switch along with the Fog Lights, some connect to the head light fuse so that the amber strip light on when turn headlights on, also some use double sided tapes to mount the amber lights bar to the hood, instead of mounting to the grill. Really a DIY retrofit set.
Warranty: We will offer 1 YEAR WARRANTY for this smoked amber grill lights kit since you place the order. Please feel free to send us email if there's any issue before or after purchase and we will reply in 24 hours.
