8 Amp Bateryy Charger and Tester for Dump Trailers 090195
[Feature] 4 wire double acting hydraulic power unit 12V DC, small area, use widely, easy to carry..
[Wide Use] Fits most double-acting hydraulic pumps power units..
[Reasonable Design] 2-button pendant control is most commonly used as a dump trailer remote, which is built of a high-impact, highly visible plastic with a standard 15′ cord. Powered by 12 volts DC, well constructed. High quality ABS material protective shell for long-term use..
[Wire Connection] For 4 wires(double-acting) dump trailer control: Use wire with metal round head connect to raising valve and lower valve. Use wire with circle connect to battery positive and starter..
[Package Include] Comes with Mounting Holster +Magnetic Back + 4 Wires–Red – Power (to Battery),Blue – Raise (to Lift Valve),Yellow – Down (to Lowering Valve) ,Black – Start Master(to Starter). Notice: If you have any problems,pls feel free to contact us..
Zone Tech Trailer Hitch Receiver Tube Extender (1 Pack)
► CONVENIENT - The Zone Tech hitch tube extender provides added clearance for a trailer or hitch-mounted accessory. Extends to 7", ideal embellishments for hitch mount bicycle rack to clear extra tire..
► CAPACITY - The Zone Tech hitch tube extender has a capacity of 3500 lbs GTW / 350lbs TW, for most bike rack and cargo carriers..
► PREMIUM QUALITY - The Zone Tech hitch tube extender is made durable high quality heavy solid steel through mechanically welded for predominant quality. With top notch equipment fittings and finished in dark powder coating for more durable conditions and free from dust and corrosion..
► SAFE - The Zone Tech hitch tube extender is guaranteed safe as long as you stay within th limits specified. Hitch tightener are highly suggested for tight fit and noise reduce..
► EASY INSTALLATION - The Zone Tech hitch tube extender are simply receiver tubes that is inserted into your trailer hitch to add a certain amount of clearance for your vehicle's bumper or spare tire mounted on the back..
This travel trailer RV accessories fits 4″- 4.5″ square bumpers (can be mounted upside or down bumper beams ).
For hitch mount 2″ shank of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity.
The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL.
The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish.
The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper.
★ HEAVY DUTY STEEL MATERIAL – This folding adapter is made by solid steel with powder coated finish, which is rust and corrosion resistance, durable material ensures its long service lifespan. Max weight capacity reach 500lbs..
★ FOLDING DESIGN – Our trailer hitch mount adapter is foldable.This allows your hitch mounted products to fold up towards that rear of the vehicle when not loaded with cargo. The length after folding 90 degree is 16 1/4″..
★ FUNCTION – This trailer hitch mount adapter can help you to connect a basket with your cargo, so you can load your goods in your cargo. Adding versatility to your cargo carrier and wheelchair carrier by using the folding adapter..
★ For 2″ TRAILER HITCHES – Work with 2″x 2″ trailer hitches..
★ WARRANTY – We will provide the best customer services before or after your purchase it, and we will always respond to any customer questions for less than 12 hours. All customers ordered in Fullwatt will enjoy 30 Days Full Money..
CZC AUTO 12V Two Sided Magnetic Towing Light Kit for Trailer RV Boat Truck -Magnetic Strength 55 Pounds
Main Purpose: Works as a complete trailer tail light guard box set for your new or existing trailer, has stop turn tail lighting modes. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer..
Solid Built : Made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6” oval light, 2” round side light & license plate mounting. Durable for all weather elements..
Awesome Brightness: Use high-quality SMD LED, lights output excellent high brightness red light for stop turn light, low brightness for tail side marker light, greatly improving visibility and ensuring you a safer night..
Color Coded Wires: White wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light..
Simple Installation: All in a set and lights are mounted on the box. Just hardwire each pigtail wire to the corresponding wire on trailer. And then weld on or bolt on the light box to the trailer frame.
VERSATILE. This spare tire mount has slotted holes and a 24-inch height to fit a wide range of tire and wheel sizes (tire mounting hardware not included).
STANDARD FIT. This trailer hitch spare tire mount is equipped with a standard 2-inch shank to fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin sold separately).
FRONT OR REAR. This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed.
SOLID STRENGTH. This receiver hitch spare tire mounting bracket is constructed from steel to provide dependable strength for miles to come.CURT hitches are welded using manual and robotic processes for speed and precision.
CORROSION-RESISTANT. For long-lasting protection against the elements, this trailer hitch wheel mount is shielded in a durable black powder coat finish.
Cenipar Trailer Hitch Pin & Clip with Grooved Head, 5/8-Inch Diameter, Fits 2 or 2-1/2-Inch Receiver
✈EASY INSTALLATION: You can easily insert the hook clip, just plug the ball seat or other hook accessories into the receiver. Line up the pin holes on the side of the receiver tube, insert the hitch pin and install the clip, the pin can be securely attached to the trailer tether and mounted to the ball. It is easier to use and more ergonomic to install when needed..
✈PREMIUM QUALITY: Trailer hitch pins and clips are made of solid steel, protected with a durable galvanized finish for excellent rust and corrosion resistance, reliable strength construction, that can resist rain , dust, and other corrosion threats. Provides solid security..
✈COMPATIBLE: The 105 degree bend of the trailer hitch pin provides a useful handle for using 5/8" pin diameter trailer hitch pins and clips with grooved heads. 5/8" diameter trailer hitch pins with clips are made of solid steel for proven strength and safety and are recommended for - 2" ， 2-1/2" and 1-1/4" trailer receivers..
✈DURABLE: 5/8" pin diameter trailer hitch pin, with clips to fit 2" receivers, the tail hook lock has a durable powder coating finish to avoid various phenomena caused by rust, such as rust that is difficult to open with a key..
✈WHY CHOOSE US: Trailer hitch pins and clips are made of hig....
HEAVY DUTY STEEL MATERIAL – This folding adapter is made by solid steel with powder coated finish, which is rust and corrosion resistance, durable material ensures its long service lifespan. Max weight capacity reach 500lbs..
For 2″ TRAILER HITCHES – Work with 2″x 2″ trailer hitches..
FOLDING DESIGN – Our trailer hitch mount adapter is foldable.This allows your hitch mounted products to fold up towards that rear of the vehicle when not loaded with cargo. The length after folding 90 degree is 16 1/4″..
FUNCTION – This trailer hitch mount adapter can help you to connect a basket with your cargo, so you can load your goods in your cargo. Adding versatility to your cargo carrier and wheelchair carrier by using the folding adapter..
WARRANTY – We will provide the best customer services before or after your purchase it, and we will always respond to any customer questions for less than 12 hours. All customers ordered in Fullwatt will enjoy 30 Days Full Money..
ZCONIEYE 3 Wire Dump Trailer Remote Control Switch 12V for Single Acting Hydraulic Pumps Power Units Lift Dump Truck…
[Functions] Great ZCONIEY up down switch remote controller replacement for dump trailer, dump truck, lift gate, lift dump, elevator lifter, stackers....
[Wide Applications] Fits most single-acting / double-acting hydraulic pumps power units including MTE, Monarch, Bucher Dyna-Jack, SPX, KTI, Bosch and....
[Strong and Durable] The pendant stations of ZCONIEY remote control are made of high quality ABS material and well constructed for long-term use..
