Best Trailer Wire

Partsam Pair 3.9" Side Marker & Clearance Light Red Waterproof Black Base Mount 3LED, Sealed Thin Line LED Trailer Marker Clearance or ID Lights w/Miro-Reflectors

  • Package includes 2pcs Red 3LED 12V Truck Trailer Clearance Lamp Side Marker Light.
  • including stainless screws for installation in package.
  • NOTE: The covers are removable. Please snap off the lens and install the base with screws, then snap it on, very secure.
  • Waterproof Lens,sealed Light Led marker trailer.
  • dimensions without base: 98 x 31 x 26(mm).
  • Universal for Pickups,Truck Trailers,SUV van Caravan and Boat Lorry Bus.
  • Replace rear clearance lights on RV or replace boat trailer clearance lights.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • HARDWIRED WITH 2 WIRES(NO SWITCH): red wire is the lead and black the ground.
  • draw exactly 40 milliamps of current at full brightness.
  • Led Marker light,Auto side Lamps,clearance light,identification light,Trailer Light etc. Easy installation: waterproof, well sealed.
Check Stock

Partsam 2Pcs 12" Clear Lens Red / Amber LED Combo Dual Face Truck Semi Trailer Light Bars 20LED Waterproof w Double Studs Sealed Trailer Led Pedestal Turn Signal Stop Tail Marker Clearance Lights

  • Chrome Plastic 20 LED 12" Double Face Trailer Light Bar with Double Metal Stud Mounts, Approx. 2-1/16" Apart. Overall Length 11-3/4". Overall Width 2-1/4". Pre-wired design and Double Metal Stud Mounts..
  • 20 Amber LED / Clear Lens and 20 Red LED / Clear Lens. Dual Function Light Bar, Marker Light and Turn Signal: 3 Wires (Hard Wired), White Wire - Ground, Red Wire - Turn, Black Wire - Marker.
  • This double faced amber/red pedestal LED is commonly used for additional visibility in stop/turn/tail functions in heavy and medium duty trucks..
  • Dual-face Led Truck trailer light bars installs on your truck semi trailer fender: Amber light faces the front of trailer and Red light faces the rear of trailer. The placement is versatile..
  • DOT compliant for street legal lighting and Fits for Kenworth Peterbilt Freightliner and other Truck lights.
Check Stock

Partsam RED Amber LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Front Rear - Clear Set, Trailer Fender Lights, Trailer Fender Clearance Lights Assembly with Bracket Trailers Over 80" Wide

  • Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
  • Pre-wired assembly mounts on top or side of fender.
  • Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
  • Amber LED light points toward front of trailer to act as front clearance light.
  • Red LED light faces rearward to act as rear clearance light.
  • 2-Wire design - includes ground wire and lead wire for power.
  • Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer.
  • LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Check Stock

Dump Trailer Remote Control Switch, Briidea 4 Wire 12V Double Acting Hydraulic Pump Power Supply Unit Remote Controller Truck Lift Gate Tipper Hoist

  • AN UPGRADE TO YOUR TRAILER: This dump trailer remote control switch is a replacement for 4-wire double-acting hydraulic power unit with 2-button pendant control, which makes the up down operation of your trailer much more convenient. A small unit but a great upgrade to your dump trailer. First choice for your dump trailer, dump truck, lift gate, lift dump, elevator lifter, stackers truck, etc..
  • WIDE USE: Fits most double-acting hydraulic pumps power units including MTE, Monarch, Bucher Dyna-Jack, SPX, KTI, Bosch and others..
  • SUPERIOR QUALITY: This dump trailer remote control is responsibly made with high-quality Eco-materials ABS, well-constructed to ensure excellent reliability and durability. Also it is small and takes little space..
  • EASY TO WIRE: 4 Wires: Brown - Power( to Battery), Blue - Raise(to Lift Valve), White - Down(to Lowering Valve), Black - Start(to Starter), instructions included..
  • FEATURES: Powered by 12 volts DC, the remote has convenient magnetic backing with a mounting cradle, easy to install. 15' cord long enough to stand at the back of dump trailer while dumping the load..
Check Stock

MECMO Multi-Tow 4-Way Flat to 7-Way RV Blade and 4-Way Flat Female Trailer Wiring Adapter Connector Kit Adapt 4-Way Flat Vehicle-Side Socket to Multiple Trailer Plugs with Mounting Bracket

  • 【Multi-Plug】This dual-output 4 Pin and 7 Pin trailer wiring adapter makes it easy to tow different trailers with your vehicle, for used to convert any 4-wire flat vehicle-end plug to a combination 7-way blade RV outlet and 4-way flat outlet. Provides multiple towing options from one vehicle-end connector for towing any heavy / light duty trailers. This special dual-output electrical adapter allows a connection to be made between a mismatched trailer plug and vehicle socket..
  • 【Universal Trailer Adapter】MECMO Multi-Tow 4&7 trailer connector adapter provides two standard trailer connections, a 7-pin RV blade and a 4-way flat socket, adapting for versatile towing options. Additional leads for brake, reverse and power function allowing you to transfer your 4-pin factory connector to a standard 7-way..
  • 【4 Flat & 7 Way Blade Output】 Dual 4 way and 7 way trailer hitch wiring adapter allows you to connect 4 poles or 7 poles trailer to your factory 4 pin socket to power taillights, brake lights, turn signals, reverse lights, electric trailer brakes and auxiliary power (12V+ wire)..
  • 【Heavy Duty】 Both 7-way RV output socket and 4-way flat equip with a tight-fitting dust cover and a spring loaded cover to keep terminals clean when not in use.....
Check Stock

BougeRV 7 Way Trailer Plug Weatherproof Trailer Wiring Harness 7 Pin Trailer Connector Enclosed Trailer Accessories with Junction Box for RV Trailers, Campers, Caravans, Food Trucks

  • ✔ BougeRV trailer plug is made from flameproof ABS junction box, good conductivity copper and solid cord.​​​​​​​ 4 open & 4 close rubber grommets makes the whole junction box weatherproof and corrosion resistant. Junction Box is much easier than managing loose wires..
  • ✔ There are several recognized wiring color code conventions on the 7-way trailer connector. Connected by function, not only by color. PLEASE FOLLOW BougeRV TRAILER WIRING DIAGRAM in DESCRIPTION or MANUAL..
  • ✔ Easy to replace damaged 7-way trailer connector plug, 8 feet length prevents it from being strained during an emergency turn. 7-Way Connects Brake, Running, Reverse, Turn Signals, and Auxiliary Power..
  • ✔ BougeRV trailer wire provides a fast, simple way to connect the wires from the trailer cord to the trailer wiring. perfect for RVs, trailers, campers, caravans, food vans and other towed vehicles..
  • ✉ What you'll get: 2 YEAR WARRANTY & Lifetime customer service.The package is junction box,8 ft wire,4 open and 4 close grommets,2 screws. including juc If you have any problems during the using process, please get in contact with us via Amazon Buyer Message..
Check Stock

CURT 58090 Vehicle-Side 6-Pin Round Trailer Wiring Harness Socket

  • SPRING-LOADED COVER. To promote long-lasting use and weather resistance, this round 6-pin trailer wiring socket comes with a spring-loaded dust cover. It protects the 6-way connector when not in use, shielding it from the outdoor elements.
  • VERSATILE DESIGN. This vehicle-trailer wiring connector makes a great replacement 6-way wiring socket. It connects the taillights, brake lights, turn signals, electric trailer brakes and an auxiliary power wire.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this 4-pin trailer wiring connector is made from strong, durable die-cast metal.
  • RELIABLE CONNECTION. This 6-way round trailer wiring socket is equipped with a locking tab on the inside of the dust cover that secures the plug in place when inserted. This helps maintain a reliable wiring connection.
  • WEATHER-RESISTANT. To help protect the splice-in wiring connections, this 6-wire vehicle socket features concealed terminals, keeping the wires from direct exposure to rain, dirt, road salt and other corrosive threats (wires not included).
Check Stock

Partsam 4pcs AMBER Square Clearance Side Marker Light Trailer RV w reflex reflector, 2-4/5" Rectangular amber stud-mount Led marker lights reflectorized

  • Partsam (Pack4) Square Trailer Clearance and Side Marker Light with Reflex Reflector - Amber.
  • The two-wire design includes the lead and ground wires to mount to any surface(Black is Ground and Yellow is Positive).
  • Easy to install, has mounting bolt centered on the back..
  • Perfect replacement for trailer side marker.
  • This square light can be used as a clearance light or side marker light with side reflex. functions as both a marker and clearance light when mounted properly.
  • This amber lens is reflectorized, meaning that a separate reflector is not needed.
  • works great on my boat trailer and should be fine on a Motorhome.
Check Stock

NEW SUN 4 Pcs 2.5" LED Clearance Marker Lights for Trailer 4 Diodes Round LED Flash Mount Marker Lights 2 Amber and 2 Red

  • 4-Pack 2.5" round trailer led lights clearance flush mount marker lights amber/red 4 LEDs.
  • Sealed waterproof pc housing with soft rubber grommet, durable and easy assembly.
  • Designed to vibrantly light up your truck or trailer at night and in other low-visibility conditions.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • Highly visible and bright with 4LEDs. Universal for any 12V DC vehicles like ATV trailer, travel trailers truck, boat trailers, RV, camper etc.
Check Stock

VOGREX 7 Way Plug Inline Trailer Cord with 7 Gang Junction Box, 6 Feet Trailer Connector Cable Wiring Harness with Heavy Duty Waterproof Junction Box for RV Trailer, Truck Camper

  • Premium Performance: 7 Way Plug Inline Trailer Cord Copper wire with excellent electrical conductivity, has flame retardant performance, safe to use.PVC jacket design, effective waterproof and weatherproof, able to adapt to various harsh environments..
  • Outstanding Quality Built: The junction box is low profile (2.2") rectangular (6.5" x 3.1"). Made of high impact, toughness& durability ABS housing. And come with4 open & 4 close rubber fitted grommet and 2 screws. Available in 4, 6, 12 feet, makes the flexible connection..
  • Easy to use: 7-way copper blade molded into a heavy duty plug, and 7-color wire quick identification marks for simple and safe installation. NOTE Maybe there have not to match color and your trailer situation, please confirm the wiring diagram first..
  • 7 Pin Trailer Plug Cord: A must have when connecting and using your trailer in the winter, especially in northern climates where ice, snow, and road de-icer chemicals are tough on trailer cord connector ends. When the trailer parked or not in use, remove the cord and store inside out of the weather..
  • Fit for: Trailer 7-Way Plug Wiring Harness with Junction box is easy to extend your trailer cord, suitable for most RVs, Trailers, Campers, Caravans, Trucks, Food Vans and other Towed Veh....
Check Stock