VCELINK Small Wire Cutter Spring-loaded GJ706BL, Precision Flush Cutter Pliers Diagonal Cutters for Electronics, Jewelry Making, Model Craft and 3D Printer, 5-Inch
WIDELY APPLICATION - The micro wire cutter can be used to cut copper wire and aluminum wire≤4mm².
iron wire of Φ≤1mm, PCB board, zip tie, plastic burrs, jewelry craft, soft copper wire, soft iron wire, etc, not for steel wires..
SHARP CUTTING - The Fine Wire Side Cutter is made of carbon steel, not easy to oxidize and rust, has high hardness HRC51-53, sharp edge, neat cut, and is not easy to break, providing longer service life..
PORTABLE & LABOR-SAVING - Mini wire snip is ideal for working in small spaces and helps you to save force, depending on the sharp bevel design, and mini side cutters are small and portable. Ergonomic PVC handle, soft and non-slip, reduces fatigue and is suitable for long-time work..
ATTENTION - To ensure the durability of the cable tie cutter, do not use it to cut wire with higher hardness, strong wire such as steel wire, or hard iron wire..
CUSTOMER FIRST - You will get 1 × Miniature Wire Cutter. We always put our customer experience as our priority, and we also provide an 18-month warranty for all of our products. If you have any problems or a....
2 Pcs 7\ Oval LED Trailer Tail Lights Surface Mount 10 LED Turn Signal Brake Lights Stop Light Side Light for RV Trucks Camper SUV
☀️Super Bright: Each trailer tail light is equipped with 10pcs super bright LED chips, providing maximum visibility and safety. Compared with halogen bulb, leds have the characteristics of fast light emission, low energy consumption, and high brightness..
☀️Excellent Performance: CAUORMOTE oval rear tail lights are made of high-quality materials, using ultrasonic welding technology to ensure waterproof, shock-proof and dust-proof sealing. Everything we do is to make it easier for you to cope with the complicated climatic environment such as rainy and foggy..
☀️Wide Applications: The red brake light for truck car can be used as tail light, turn signal, stop light, side marker light, clearance light, rear light. Ideal for most 12V vehicles and devices such as trucks, trailers, bus, RV, pickup, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump truck, special vehicle, etc..
☀️Simple Installation: Black Wire - ground, Red wire - high brightness for brake/stop light, Blue wire - low brightness for tail/running light. Do not plug and play, this tail light is hard wired and needs to be installed with screws..
☀️What You Will Get: 2 Pcs trailer tail brake light included. If you have any questions about our trailer tail ....
Nilight 2PCS LED Trailer Fender Lights Pre Wired Trailer Clearance Marker Lights Amber Front Red Rear for Trailer Trucks,2 Years Warranty
Main Purpose: Designed in dual faces mounted on the top of fenders, work as both front and rear clearance marker lights, easily help you and other drivers behind identify the widest point of trailer, ensuring a safer drive & better protection.
High Visibility Light: Both left and right fend light use 14PCS led diodes, 7PCS for amber light at front and 7PCS for red lights at rear, output highly visible marker light for your enclosed trailer.
Simple & Tidy Installation: Lights are pre-wired with connectors and designed with extended bracket housing, offer you a quick wire connection and convenient and tidy wire routing, protecting it from exposure and damages.
Wires Connection: Comes with about 7” wire lead, wire gauge 22AWG, black wire with ring terminal to ground,red wire to 12V positive tail light wire.
Application: Can be widely used on 12V trailer trucks, freightliner, emergency vehicles and service vehicles etc.
Partsam 2Pcs LED Truck Trailer Tail Lights Bar Kit 40 LED Waterproof Tail Turn Signal Brake Light Running Reverse Light with Iron Net Protection 5 Wires 10V-30V for Truck Boat Trailer UTV RV Camper
Package includes 2pcs 40 LED Trailer Tail Light Bar. It is ideal for most towing vehicles equipped with 10V to 30V DC power supply, such as RV, campers, trailers, trucks, UTEs, UTVs, engineering vehicles, loader, boats, flatbed, vans, caravans, Excavator,Reaping machine and so on,can improve safety give your car a new look.
Trailer tail light bar adopts 40 pcs advanced LED with high brightness, long lasting, bright LED technology. Over 100% brighter than Stock units. Life span of over 50,000 hours. Our replacement trailer tail lights may very well outlast your truck! We do build a 2" X 4" reflector into the red portion of the lens, which will make them legal to use.
There is Iron bracket on the backseat and the iron net in front of the lampshade, which is stronger than others such as just pure plastic and protect the whole LED light bar effectively and prolong its service life.
5-WIRE connection system for Negative, Turn Signal, Brake Light, Running Light and Reverse Light: Black Wire - Negative.
There are two mounting studs on the back with nuts to lock them in place. just cut your current tail lights wire harness one by one and matc....
CZC AUTO 12V LED Magnetic Towing Light Kit for Boat Trailer RV Truck - Magnetic Strength 55 Pounds
STRONG MAGNETS: CZC AUTO 55 pounds magnetic trailer lights for towing holded so firmly to automobile metal surfaces, the lights will not fell off during working. You could also tie them to the trailer with zip ties if you need. Protective label on the base avoid surface scratches. Strong magnet but easy to remove by adult when you don't need them.
2 SIDED TOWING LIGHTS: With 4.25'' red & amber lens, our magnet trailer lights work on both side, red on the back, amber on the front. Our portable trailer lights can be seen in the rear-view mirror, so you could check if they are working when you are driving. 12V wiring easily connect to most automotive electrical systems, great for cargo trailers, boat, ATVs, snowmobiles, and campers.
WORK OUT OF BOX: Use our towing lights with no splicing, the only wiring you might to do is on the tow vehicle. Wire distance between lights is 7'/84'', ideal for towing applications up to 80'' wide like trailer, truck, RV etc.. Wire harness length between 4 standard pin male connector and light unit is 20'/240'', easily connect. We offer 4 Quick Splice Wire Terminals for quick spli....
Wire Length: Comes with 18AWG 25ft male and 4ft female connector wire, both with full ground wire for your use. Designed to split at the trailer....
Built To Last: Employ quality pure copper wire with tin plating for the best current conductivity and anti-oxidation ability, and premium PVC coating....
Standard 4 Way Flat Connector: Male plug with 5 wires, female plug with 4 wires. Plug and play, matches with any other standard 4 pin flat plugs..
Color Coded Wires: Wires are color coded and bonded, white for ground, brown for running and license light, yellow for left stop turn and green for....
Universal Application: Work perfectly on trailers under and over 80” wide such as marine boat trailer, cargo utility trailer to install trailer....
CZC AUTO 12V Submersible LED Trailer Tail Light Kit for Under 80 Inch Trailer Boat utility Trailer Waterproof (Trailer light kit)
Left and Right trailer tail Lights have 7 functions : stop/turn/tail/rear reflector/side reflector/side marker light/ license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat,utility trailer, truck, snowmobile, etc..
18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime! The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
Excellent Waterproof/Submersible Lights for Boat Trailer. Sonic Welding Sealing Technology ensures sealing solidity of the tail lights. Every possible gap is sealed well with marine grade glue, such as wire's entrance holes and edge of the lens.
Easy to install the submersible trailer lights. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram ships with trailer lights, you can also find it on instruction sheet.
CZC AUTO, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PLEASE NOTE: Any problem in using our submersible trailer tail lights,....
TIROL 5-Way Flat Trailer Wire Harness Extension Connector Plug with 36 inch Cable Length End Connector
Splices into trailer wiring to provide a connection to the vehicle socket..
Five-way flat connector with a 36 inch wire loop..
Brass terminals for better conductivity..
Wishbone design for superior trailer installation..
5 Way Flat Trailer Wire Harness Connector Plug for Trailer Truck Hitch Wiring. If you have any questions please contact us first and we will give you 100% Satisfaction Guaranteed..
x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
As every truck lamp come with two wires, they can only use as one function a time.
free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
5.These are Waterproof, not submersible. Please do not use it under water.
2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
Tips and Warranty: 1. These led lights are not dimmable.
The indicator light is hardwired with 2 wires and can be used as constant on trailer light....
IFUN Jewelry Castable Resin for 405nm LCD 3D Printer Jewelry Cast Lost Wax Cast SLA UV Cure Photosensitive Resin Liquid Red 500g
Sharp and Strong: Small wire cutter has an 1/2" long heat-treated carbon steel jaw with angled head design. Flush Cutter with improved blades design snips wire up to 16 AWG.
Precision Wire Cutter: Flush Cut Micro Cutter with angled head is nice for tight cuts. Excellent for zip ties, beading wire, trimming circuit boards, jewelry making, model kit, Ethernet cable preparation, electronics work and any that requires a flush cut.
Non-slip Hand Grips: Wire snips with non-slip hand grips with curved fore-edge provide comfort and control.Compact design increases access in confined areas.
Spring-loaded: Steel return spring for increased comfort during repetitive cutting.
Tips: To ensure the durability of the cutters, not for use on steel wire, do not use it to cut very hard or big gauges wires.
