Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve
The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
pumping is only required to build additional pressure..
The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
[Upgrade] The maximum power is upgraded from the previous 60W to 80W, and the overload protection is upgraded to increase safety protection for your operation.In addition, you will get 1 additional outlet hose, 1 inlet hose, 4 hoses in total, but our price remains the same..
[Measured extraction speed]Under the premise of engine oil heating, the speed can reach 0.3gal/min, while the diesel extraction speed is 0.6-1gal/min, Voltage: 12V, maximum current: 7A, maximum power: 80W. According to the arrow Install the hose, Inlet Hose is thin, Outlet Hose is thick.
[Safe Operation]: To pump oil properly, before use, please heat the car engine to 104°F-140 °F (40℃-60℃) for about 15 minutes to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline. Do not use this fluid oil change pump to extract water, gearbox oil, or easily flammable liquids (fuel, petrol, etc)..
[Application] This oil transfer pump can change engine oil and diesel for cars, boats, motorbikes, trucks, RV and ATV, and other 12V vehicles..
[What you get]: Package included: 1 x Pump.
2 x Battery Clamps. Service warranty: 12month warranty and friendly customer service. Please contact us via email if has any questi....
Mityvac MV6412 ATF Pneumatic Refill System; Air Operated, Services Sealed Automatic Transmissions with up to 2.5 Gallons of Fluid; Includes Quick-Change Style Accessory Connections
EASY OPERATION: Transmission Fluid is dispensed under pressure by pressurizing the reservoir with the built in hand pump for smooth continual flow. ON/OFF and flow control valve are conveniently located near fluid output..
ACCESSORIES: Includes ten (10) adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions..
NO TOOLS NEEDED: The MV6412 utilizes push-to-connect, quick-change style accessory connections..
SOLID CONSTRUCTION: Internal pump components are sealed against exposure to fluids. This ATF refill system includes a custom-molded storage case for easy and safe storage of adapters..
LUMAX Black LX-1300 Lever Bucket 5 Gallon Pails. Smooth, Easy Pumping Action dispenses All Types of Lubricants, Even in The Coldest Weather
Portable - clamps to any 25-50 pounds/ 5 gallon pail.
All steel pump has 1-1/2 inches inlet and 1/2 inches outlet port.
Zinc plated corrosion-resistant suction tube.
Self-priming delivers 1 quart per 12 strokes.
5 feet oil resistant flex hose with curved nouncezleDescriptionThe lever-action bucket pump uses smooth, easy pumping action and dispenses all types of lubricants, even in the coldest weather. It is ideal for transferring motor oil, transmission fluid, differential fluid, heavier oils and other automotive additives. Rust resistant ribbed cover assembly firmly clamps to any 25-50 pounds / 5 gallon pail using adjusting screws to accommodate variations in drum diameter. This all steel pump has an 18 inches x 1-1/2 inches zinc plated, corrosion-resistant suction tube with a 1-1/2 inches inlet and a 1/2 inches outlet port and a 5 feet oil resistant flex hose with curved nozzle. The head of the pump is made of heavy-duty, lucast, cast-alloy material which is heavier and has a reinforced wall thickness for extra strength and durability. This pump is self-priming , delivers 1 quart per 12 strokes, and has a pump lever with an oil resistant, contoured grip for comfort and safety..
◇ Super Function: Use the simple syringe action of the car fluid transmission manual pump syringe bottle-gearbox, brake, steering system,....
◇ High-quality Materials: Superior MaterialsThe Oil Pump Extractor with heavy duty construction offers great strength and durability. Built-in dual....
◇ General Purpose: It is very suitable for emptying or filling the master cylinder and other fuel tanks, pumping out the brake fluid from the fuel....
◇ Easy to Measure: the capacity is 1500mL.
the size is 22.8 x 22.8 x 3.9 inches (58cm x 10cm x 10cm).
the streamlined design allows access to narrow....
◇ Widely ApplicationIdeal: for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor....
20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black
▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction
【 Work Freely 】 Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs..
【 Easy to Use 】 Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress..
【 Hominization Design 】The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling..
【 Wide Applications 】 EWK oil extractor is designed to drain old fluids from cars, motorcycles, lawnmowers, marine engines, watercrafts, stationary engines and industrial machinery. It's also works perfectly for low viscosity fluids such as trapped water or coolant. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor..
Lincoln 1335 Heavy-Duty Lever-Action Fluid Transfer Pump for 16- to 55- Gallon Drums 8.5 Fl Oz Per Stroke Adjustable Two-Position Handle for Pumping Low- to High-Viscosity Fluids
VERSATILE - The 1335 fits 16- to 55-gallon (60- to 205-liter) drums and includes a telescopic suction tube..
PERFECT FOR MULTIPLE FLUIDS - The pump is compatible with the following fluids - motor oil, transmission fluid, gear oil, fuel oils, engine coolant, diesel, kerosene and hydraulic oil..
STANDARDIZED - This lever-action pump fits all standard 2-inch bung openings and includes an integrated bung opening tool in the pump head..
CONSTANT PRIME - The internal check valve assures constant prime..
HEAVY-DUTY CONSTRUCTION - The steel construction includes brass rings for proven durability and expanded fluid compatibility..
Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
