Best Traxxas Slash Big Bore Shocks

Traxxas 5891 SCT Wheels SS Black Satin Paddle Tires

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to satin-chrome beadlock style SCT wheels for use with Traxxas Slash.
  • Fits Traxxas Slash 4WD front and rear, or 2WD rear only (TSM rated).
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

SummitLink Aluminum Shock Damper Absorber P Compatible for Stampede Slash 4X4 VXL 4mm USA Blue

  • Aluminum Shock Damper Absorber P Stampede Slash 4X4 VXL 4mm Big Bore USA.
  • ALUMINUM FRONT & REAR SHOCK for 1/10 SLASH and Stampede 4x4 VXL.
Check Stock

BANDIT VXL VELINEON 3500 VXL BRUSHLESS MOTOR RUSTLER SLASH #3351R TRAXXAS #24076-3

  • Make sure this fits. by entering your model number..
  • Will fit many 4wd Traxxas 1/10 models: Slash, Stampede, Rally, Rustler, Bandit....
  • NOT compatible with older style traxxas 3355X ESC.
  • Traxxas recommends this motor to be used with matching ESC: 3355r.
Check Stock

Traxxas 6884 Center Differential Housing with Seals and Hardware

  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles..
  • This product is made from high quality materials and designed for long-lasting performance..
  • This is replacement hardware for use on Traxxas vehicles.
  • consult your user's manual for exact parts listings..
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Slash 4x4.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Orange.
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Vision Ed..
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Bumpers Compatible with Traxxas Slash 4x4 1/10 Platinum Front #6835 & Rear #6836 Bumpers Skid Plate with Mounts

  • #6835: Front Bumper & Mount, Black, Slash 4x4.
  • #6836: Rear Bumper & Mount, Black, Slash 4x4.
  • Great replacement for your worn or damaged bumpers..
  • Our parts are made from premium quality materials and designed for lasting performance..
  • This product is neither created or sold by Traxxas, nor sponsored or endorsed by Traxxas..
Check Stock

Traxxas 3776 2.8" Pre-Mounted Paddle Tires w/All-Star Rear Wheels (2)

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to satin-chrome beadlock style SCT wheels for use with Traxxas Slash.
  • Fits Traxxas Slash 4WD front and rear, or 2WD rear only (TSM rated).
Check Stock

Traxxas 3743A Blue-Anodized T6 Aluminum Steering Bellcranks and Drag Link

  • Enhance your steering precision, strength, and looks with a genuine Traxxas machined aluminum steering bell crank assembly.
  • Made from laser-etched, high-strength, blue-anodized T6 aluminum.
  • Integrated sealed bearings for silky smooth operation, reduced friction, and long life.
  • Fits Traxxas Bandit, Rustler, and 2WD Slash.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock