Best Trolling Motor Remote Controls

Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor Mount

  • Universal trolling motor bracket for clamp-on type electric trolling motors..
  • Constructed of marine aluminum with black Nylon plastic.
  • Designed for motor to be removed when boat is under engine power or being trailered..
  • For electric trolling motors only. Not for outboard engines of any size..
  • Maximum trolling motor thrust of 36 pounds,Come with a two years limited warranty.
Check Stock

Minn Kota 1363762 Riptide Terrova Saltwater Electric-Steer Bow-Mount Trolling Motor with Digital Maximizer & Copilot 80 lbs Thrust 54 Shaft

  • CoPilot: The original wireless remote gives you push-button command of speed and steering of your trolling motor.
  • Advanced Corrosion Protection: Riptide motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a....
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact....
  • Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is....
Check Stock

Minn Kota 1363558 Riptide PowerDrive Saltwater Electric-Steer Bow-Mount Trolling Motor with Digital Maximizer & Copilot 55 lbs Thrust 48 Shaft

  • CoPilot: The original wireless remote gives you push-button command of speed and steering of your trolling motor.
  • Advanced Corrosion Protection: Riptide motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a....
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact....
  • Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is....
Check Stock

Minn Kota 1358814 Terrova Freshwater Electric-Steer Bow-Mount Trolling Motor with i-Pilot GPS, 80 lbs Thrust, 60-Inch Shaft

  • The Minn Kota Terrova features an easy-to-deploy system of fallaway ramps that effortlessly slide the trolling motor into the water, plus a spring-loaded Lift-Assist design for easy stowing..
  • The i-Pilot system allows you to control your motor from the color touchscreen remote or from a virtual remote on your Humminbird fish finder (sold separately)..
  • Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing..
  • With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is one of the most trusted props in fishing..
  • This Minn Kota Terrova has a 60-inch shaft length, features 80 pounds of thrust (24 volts), and includes a heading sensor, mounting hardware and cabling, and i-Pilot GPS system. Foot control not included..
Check Stock

PARKHO HASWING Electric Trolling Motor – 12V 20lbs 22 Inch Shaft Inflatable Kayak Mount Bracket Folding Handle Speed Control Boat Fishing Saltwater Freshwater 50735

  • ELECTRIC MOTOR - Our 12V 20lbs Trolling Motor system is designed and engineered to run efficiently than ever before. It is so quiet that the fish will never hear you coming. There are variable speed functions that let you dial in your desired speed to provide more precise and smooth adjustments, as well as improve control of the motor. Perfect for inflatable boats and kayaks, spend more time catching and less time chasing the fish with a trolling motor that has all the power you need!.
  • SPEED CONTROL - Featuring digital technology built into this motor system that provides a stepless forward movement and reverse with high and low speed control, all from the handle. No more protruding foot pedals with this advanced stepless speed controller that you can access easily with your hands. With a smart user interface like this, it will make fishing trips super easy and more convenient..
  • FOLDING & TILTING - This electric motor has a trolling handle with the folding functions that can fold at an angle of 0 to 110 degrees. It also offers 0 to 90 degree of motor tilting positions. These full motor pilot control features on this fishing engine enable you with a lot of flexib....
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Trolling Motor Plug Receptacle Set for Marine Boat, Waterproof 12/24/36/48 Volt Trolling Motor Connector Kit for Down Rigger, Fishing Reel, DC Power, Trolling Motor Accessories

  • 【Premium Quality】This Trolling Motor Plug Receptacle Set is made of brass gold-plated electrical components, which is corrosion-resistant. And the shell of it is waterproof, flame-retardant and high temperature resistance. It is Weatherproof, maximum durable for harsh marine environment..
  • 【Wide Applicability】The marine trolling motor plug receptacle set is universal design for 2 wire configuration 12V, 24V, 12/24V, 24/36V, 36V or 48V system. 50A continuous rating. Compatible with 6 AWG wire..
  • 【Safety & Convenient Design】A self-locking design, which can firmly connect the trolling motor to the power supply, effectively preventing the plug from accidentally falling off and ensuring safe use. With an ergonomically contoured handle, it can provide you with comfort while frequently connecting and disconnecting the trolling motor and battery. The watertight sealing cap and gasket to enhance the ability to be waterproof. Also,this set adopts direct insertion systems. Time and effort saving..
  • 【Widely Used】This trolling motor power plug is designed for harsh marine environments, and are ideal for trolling motors,....
Check Stock

Trolling Motor Plug Receptacle Set, 12V/24V/ 36V/48V Plug for Trolling Motor/ Down Rigger/Fishing Reel,Waterproof Marine Boat DC Power Connector

  • Secure trolling motors plug and receptacle set: self-locking design keep trolling motor and power supply tightly to make sure waterproof performance,and weather resistant cover & watertight cap are for more safety..
  • Maximum durable for harsh marine environment:The plug receptacle for trolling motor are made of corrosion resistant sturdy extremely solid built material, and plated brass electrical heavy duty components..
  • The marine trolling motor plug receptical are universal design for 2-wire configuration 12V, 24V, 24/36V, 12/24V, 36V or 48V systems..
  • Suit for:Our plug receptacle perfect for connecting heavy electrical current high amperage draw trolling motor, electric down riggers, deep drop electric fishing reels and other DC powered device. A must have for marine trolling motors owner of Terrova,ulterra Powerdrive terrova,Princecraft etc.
  • Great DC TO DC power connector for freshwater&saltwater,high-current application, compatible with 6 AWG larger gauge wire without overheating..
Check Stock

Neoprene Troll Sleeve Trolling Motor Wires/Cable Organizer Sleeve - Black/White 1Pack 78 Inches

  • 【Keep the boat clean and tidy】Keeps every wire on the bow all nicely enclosed in this trolling motor cable sleeve, it keeps everything neat and....
  • 【Protect trolling motor cables】Cable protector seawater, rainwater cannot penetrate, protects your trolling motor cable from the environment.....
  • 【Eliminate potential hazards】 The Exposure of fishing trolling motor cable is a huge safety hazard, troll cuffs eliminate the potential of "pinch....
  • 【Easy to install and remove】Easy way to protect cables without having to disconnect cables, hoses, etc. Just wrap it around and let the velcro do....
  • 【Multifunctional Use】Troll sleeve is also suitable for home, office, database, etc. Wrap up TVs, exposed wires on various appliances, and....
Check Stock

Troll-Tamer™ for Minn Kota Trolling Motor Stabilizer Lock

  • Designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat.
  • For use with Minn Kota Ultrex, Fortrex and Lowrance Ghost, 5"-8" spacing.
Check Stock